···
Log in / Register

What is the fuel consumption of the Changan CS55?

6Answers
LaBennett
08/31/2025, 03:25:11 AM

The fuel consumption of the Changan CS55 is 6.5-6.6L. Below is more information about fuel consumption: 1. Fuel consumption, referred to as fuel usage, indicates the liters of fuel consumed by a vehicle over a certain distance. In China, the unit for fuel consumption is L/100Km, which represents the liters of fuel consumed per 100 kilometers. The lower this number, the better the vehicle's fuel economy. 2. Fuel consumption is typically measured through road tests. The constant-speed fuel consumption test over 100 kilometers is one of the simplest road tests. According to China's JB3352-83 standard, the road conditions for constant-speed fuel consumption tests should be: flat, dry, and clean cement or asphalt roads with a longitudinal slope of less than 0.1% and a straight section longer than 1500m.

Was this review help?
102
Share
LaCamilla
09/12/2025, 11:44:51 PM

Driving the Changan CS55 SUV, I have some firsthand experience. It's equipped with a 1.5T engine, and the official fuel consumption data is usually around 6.8 liters per 100 kilometers. However, after driving it for over two years, I rarely achieved that figure in real-world conditions. In city driving, fuel consumption can rise to 8 liters in traffic jams, while on the highway, it typically drops to 6.5 liters. Before the break-in period, consumption might be slightly higher, but later, by improving driving habits—such as avoiding sudden acceleration and maintaining a steady speed—I stabilized fuel consumption at around 7.3 liters. Vehicle load has a significant impact; when carrying family and luggage, fuel consumption surged to 9 liters. Tire pressure is also crucial—low pressure can increase consumption by about 0.5 liters. I recommend regular maintenance, including air filter and oil changes, to help control fuel consumption and save on gas costs.

Was this review help?
19
Share
Expand All
SanAsher
10/27/2025, 12:32:13 AM

The fuel consumption performance of the Changan CS55 is quite noteworthy. It is equipped with a 1.5T turbocharged engine paired with an efficient automatic transmission, with an official combined fuel consumption of 6.8 liters per 100 kilometers. However, in real-world driving conditions, the average fuel consumption typically fluctuates around 7.5 liters, as environmental factors such as road conditions and air conditioning usage affect the results. The aerodynamic design helps reduce fuel consumption on highways, bringing it down to around 6.5 liters, while stop-and-go city driving can push it up to 8 liters. Compared to similar SUVs in its class, such as the Haval H6, the CS55 has slightly lower fuel consumption, indicating that Changan has optimized weight reduction and engine tuning. If you want to further reduce fuel consumption, using the manufacturer-recommended oil type can make the transmission logic smoother. Regularly checking the spark plugs is also advised, as worn-out spark plugs can increase fuel consumption by 0.5 liters.

Was this review help?
14
Share
Expand All
Adriana
12/09/2025, 11:46:00 PM

As a car owner, I focus on sharing fuel-saving tips. The Chang'an CS55 has a nominal fuel consumption of 6.8 liters, but it's normal to get around 7 liters in real-world driving. To save fuel, maintain a steady speed of 70 km/h, as aggressive acceleration can increase fuel consumption by 1 liter. Using the air conditioning adds about 1 liter, so opening the windows for ventilation on nice days saves money. Keep tire pressure at the recommended level, as underinflation increases fuel consumption. After the break-in period, fuel consumption stabilizes, and I reduced mine by 0.5 liters to around 7 liters through gentle driving. Carry less weight and avoid overloading the trunk. Regular oil changes help the engine run efficiently. With simple adjustments, fuel consumption can be much better controlled.

Was this review help?
16
Share
Expand All
LeAnderson
01/30/2026, 12:57:10 AM

I've been driving the Changan CS55 for three months, initially choosing it for fuel efficiency. The official claim is 6.8 liters, but my new car's consumption was nearly 9 liters at first, which was a shock. Friends explained that higher consumption during the break-in period is normal, and now it's stabilized at 7.5 liters per 100 km. Highway driving is indeed more economical, reaching around 6.7 liters; city traffic consumes more, with over 8 liters not uncommon. Fuel consumption varies with driving habits—gentle starts are better than sudden braking. Regularly checking tire pressure is essential, with the standard pressure marked on the driver's side door frame. Remember, fuel consumption will drop after the first few thousand kilometers, so don't worry. Keeping up with maintenance helps control fuel consumption better.

Was this review help?
2
Share
Expand All
MariaDella
04/25/2026, 12:05:50 PM

From an economic perspective, the fuel consumption of the Changan CS55 affects your wallet. With an average of 7L/100km and current fuel prices around 7.5 yuan/L, the cost per kilometer is 0.52 yuan, saving significantly compared to high-fuel-consumption vehicles like those consuming 9L. The advantage becomes more apparent on long-distance trips, where a few extra liters per 100 kilometers can add up to hundreds of yuan over a year. The vehicle's weight and aerodynamic design help reduce fuel consumption, though the SUV body leads to higher urban fuel usage. Environmentally, its carbon emissions are about 168g/km, which is relatively moderate. It's recommended to perform regular engine checks and use high-efficiency engine oil to maintain optimal performance and prevent increased fuel consumption. In the long run, adopting appropriate driving habits can save money and reduce waste.

Was this review help?
18
Share
Expand All
More Q&A

What Causes a Transmission Failure Where Reverse Gear Doesn't Work?

Reasons for transmission failure where reverse gear doesn't work: There may be a fault in the power electronic control system, possibly due to a faulty sensor connection circuit in the transmission, lack of automatic transmission fluid, overheating of the automatic transmission, or failure to increase speed caused by a slipping one-way clutch, among others. Functions of the transmission: 1. Changing the transmission ratio: To meet the traction needs under different driving conditions, allowing the engine to operate under optimal conditions and meet possible speed requirements. 2. Enabling reverse driving: To meet the need for the vehicle to move backward. The engine crankshaft generally only rotates in one direction, but vehicles sometimes need to move in reverse, hence the reverse gear in the transmission is used to achieve this. 3. Interrupting power transmission: To stop power transmission to the drive wheels when the engine starts, idles, during gear shifts, or when parking is required for power output. 4. Enabling neutral gear: When the clutch is engaged, the transmission can stop power output. For example, this allows the driver to release the clutch pedal and leave the driver's seat without turning off the engine.
102
Share

How to Solve Excessive Engine Noise?

There are several solutions to excessive engine noise: 1. Drive on the highway for a while when it is safe to do so. Frequent low-speed driving and constant stop-and-go in urban areas prevent the engine from fully releasing, leading to carbon buildup and increased noise. Therefore, if you often drive in the city, take time to go out and drive on the highway occasionally. 2. Perform engine maintenance. When refueling, you can add some fuel additives, which can effectively remove carbon deposits. After all, the quality of fuel in our country still needs improvement, so proper engine maintenance is necessary. 3. Change the engine oil. Regularly maintain your car on schedule. Even if the mileage hasn't been reached, it's important to drain the old oil because engine oil oxidizes over time, causing its various performance indicators to decline. This reduces the protection it provides to the engine, leading to noise. Therefore, timely oil changes are essential. 4. Clean the throttle body. After prolonged driving, the throttle body can accumulate dirt. If the engine noise is excessively loud, it might be due to a dirty throttle body. A professional cleaning at a repair shop can significantly improve the situation. 5. Improve sound insulation. The noise could also be due to deteriorating sound insulation in your car. As various soundproofing materials age, sounds that were previously inaudible may now enter the cabin. Therefore, upgrading the sound insulation can help reduce noise.
106
Share

What is the maximum speed limit for urban roads without a center line?

For roads without a center line, the speed limit on urban roads is 30 kilometers per hour. Here are the relevant details: 1. Regulations: Article 45 of the "Regulations for the Implementation of the Road Traffic Safety Law" states that motor vehicles must not exceed the speed indicated by speed limit signs or markings on the road. On roads without speed limit signs or markings, motor vehicles must not exceed the following maximum speeds: for roads without a center line, the speed limit is 30 km/h on urban roads and 40 km/h on highways. 2. Notes: For roads with only one motor vehicle lane in the same direction, the speed limit is 50 km/h on urban roads and 70 km/h on highways.
103
Share

What level of car does the XT6 belong to?

This is a mid-to-large size SUV with a large body size. Below is an introduction to the Cadillac XT6: 1. The Cadillac XT6 is equipped with a 2.0-liter turbocharged engine across all models, delivering 241 horsepower and a maximum torque of 350 Nm. This engine can output maximum power at 5000 rpm and maximum torque between 1500 to 4000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 2. Paired with this engine is a 9-speed automatic transmission (9AT). The AT transmission offers smoother shifting and excellent reliability and durability. The XT6 uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
103
Share

What is the thickness of automotive sheet metal materials?

Automotive sheet metal materials have a thickness of 0.7mm. The methods for automotive sheet metal repair include: the pleating method, which is used to repair stretched and deformed areas. During the repair process, some pleats are created in the stretched and deformed areas. The pleated areas will be slightly lower than the surrounding areas. After filling with putty, smooth it with a file and then apply paint. The heat shrinking method involves heating the area that requires sheet metal work. When the temperature rises, the steel plate will expand outward, creating stress on the surrounding areas. As the temperature continues to rise until the metal softens, the surrounding steel plate will return to its original shape. Methods for maintaining automotive paint include: 1. Wash the car after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean any stains on the car body promptly; 4. Rinse with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze coating.
102
Share

What is the maintenance interval for the Wuling Hongguang S?

The maintenance interval for the Wuling Hongguang S is every 5,000 kilometers. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. The dimensions of the Wuling Hongguang S are: length 4390mm, width 1660mm, height 1750mm, with a wheelbase of 2720mm and a fuel tank capacity of 50 liters. The Wuling Hongguang S is equipped with a 1.2L naturally aspirated engine, with a maximum power of 56kW and a maximum torque of 110Nm, paired with a 5-speed manual transmission.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.