···
Log in / Register

What Causes the Steering Wheel of S90 to Make Abnormal Noises When Turning?

1 Answers
AubreeDella
07/29/25 9:03pm
When a car makes abnormal noises while turning during driving, it may be due to a malfunction in the vehicle's steering system. Below is an introduction related to the steering wheel: 1. Introduction to the steering wheel: A wheel-shaped device used to control the direction of movement in cars, ships, airplanes, etc. 2. Function of the steering wheel: The steering wheel is generally connected to the steering shaft via splines, and its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel reduces the hand force required from the driver when turning. The steering transmission shaft, as a connecting component between the steering gear and the steering shaft, facilitates the generalization of the steering gear, compensates for errors during manufacturing and installation, and makes the installation of the steering gear and steering wheel more reasonable in the vehicle.
Was this review help?
17
5
Share
More Forum Discussions

Will the Nissan GT-R be discontinued?

Nissan GT-R has been discontinued. The Nissan GT-R is a sports car under the Nissan brand. Introduction to the Nissan GT-R: 1. Powertrain: Equipped with a 3.8-liter twin-turbocharged V6 engine, engine code VR38DETT. In factory settings, this engine delivers a maximum power of 357 kW, maximum torque of 588 N·m, with peak power achieved at 6,400 rpm and peak torque available between 3,200 to 5,200 rpm. The engine is paired with a 6-speed dual-clutch transmission. 2. Suspension: Features a double-wishbone front suspension and a multi-link independent rear suspension, with a front-engine, rear-wheel-drive layout.
4
3
Share

Is It Illegal to Install a Shark Fin Antenna?

Adding a shark fin antenna to the roof of a car, without altering the vehicle's structure or characteristics, is not considered illegal. Article 16 of the Road Traffic Safety Law states that no unit or individual may engage in the following activities: 1. Assembling a motor vehicle or altering the registered structure, construction, or characteristics of a motor vehicle without authorization. 2. Changing the model number, engine number, frame number, or vehicle identification code of a motor vehicle. 3. Counterfeiting, altering, or using counterfeit or altered motor vehicle registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks. 4. Using the registration certificates, license plates, driving licenses, inspection qualification marks, or insurance marks of other motor vehicles.
2
5
Share

What brand of tire is Toyo?

Toyo is Toyo Tires. Here is the relevant introduction: 1. In 2015, TOYO-TIRES officially changed its name from the original meaning-translated name 'Toyo Tires' to the phonetically translated name 'Toyo Tires'. 2. Tires are circular elastic rubber products assembled on various vehicles or machinery that roll on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 3. Since its founding in 1945, the Toyo Rubber Industry Group has been engaged in the manufacturing of globally applicable rubber products. Supported by unique technologies developed in Japan, the group transforms design achievements into valuable products through technological innovation, supplying them worldwide. The group has long been expanding its overseas operations and has developed and manufactured a variety of products based on independent technologies, centered around automotive tire manufacturing, supplying society in over 100 regions and countries.
17
2
Share

What is the function of a car's spark plug?

Function of car spark plugs: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode to generate a spark, thereby igniting the air-fuel mixture in the cylinder. Components of a spark plug: A spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell. Types of spark plugs: Main types of spark plugs include: standard spark plugs, projected insulator spark plugs, electrode spark plugs, seat spark plugs, pole spark plugs, and surface-gap spark plugs.
17
2
Share

How to Use a Six-Speed Manual Transmission Car?

How to use a six-speed manual transmission car: 1. Open the door and get in, first adjust the seat, adjust the rearview mirror and side mirrors, and fasten the seat belt; 2. Turn the car key clockwise to start the engine; 3. Press the clutch with your left foot, for safety, you can press the brake with your right foot, use your right hand to move the gear shift to the first gear position, engage first gear, and release the handbrake; 4. Slowly release the clutch with your left foot, when you feel the car body vibrating, lightly press the accelerator with your right foot to complete the start; 5. When the speed exceeds 20 mph, shift to second gear, shift to third gear when exceeding 30 mph, shift to fourth gear when exceeding 45 mph, shift to fifth gear when exceeding 60 mph, and shift to sixth gear when above 85 mph; 6. Before downshifting, lightly press the brake to reduce speed, and downshift step by step according to the speed; 7. After stopping, press the clutch, shift to neutral, and pull the handbrake.
6
0
Share

How to Use Lights When Entering a Highway Ramp?

Before entering the ramp, you should turn on the right turn signal, and before merging onto the highway from the ramp, you should turn on the left turn signal. Here are the relevant details: 1. When driving on the road, it is essential to use lights correctly, as this enhances safety during the journey. 2. When driving on urban roads, avoid using high beams, as they can impair the visibility of oncoming drivers and those ahead of you. 3. On urban roads, you can alternate between high and low beams when approaching crosswalks to alert pedestrians. When changing lanes or turning, always signal in advance. On rural roads or highways without streetlights, you may use high beams, but as a courtesy, switch to low beams when encountering oncoming traffic.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.