···
Log in / Register

What Causes the Squeaking Noise When Starting the Sagitar?

3 Answers
SanKatherine
09/07/25 7:32am
The squeaking noise when starting the Sagitar may be due to clutch failure, transmission failure, lower control arm issues, or inner CV joint wear. It is recommended to visit a local 4S dealership for inspection and repair. Definition of Car Abnormal Noises: During normal driving, vehicles typically produce some noise. However, if this noise exceeds a certain level, it can be identified as abnormal body noise. Solutions for Car Abnormal Noises: Visit a professional 4S dealership for repair and handling. Summary of Car Abnormal Noises: A persistent squeaking noise when starting the Sagitar is a common fault symptom. It can be quickly resolved by visiting a professional 4S dealership for repair.
Was this review help?
10
0
Share
CassandraRose
09/19/25 6:38am
My Sagitar makes squeaking noises when starting, most likely due to brake pad issues, as it happened with my new car before. Last time I went for repairs, the technician said metal shavings or dust on the brake pads cause friction and noise during startup; aggressive braking habits can also accelerate wear, so they recommended checking every 20,000 km. Another possibility is aging suspension bushings, especially common in older cars—my neighbor had this issue, and replacing a small part cost just a few dozen bucks to fix. Also, check if the brake discs are normal; if uneven, they’ll need resurfacing. Don’t delay these minor issues, or brake failure could be dangerous—I almost rear-ended someone last week. It’s best to visit a 4S shop or a reliable auto repair shop for a full diagnosis—they’ll use specialized tools to pinpoint the root cause, saving you the hassle of guessing. Remember, regular maintenance is key, and OEM parts are more reliable.
Was this review help?
12
5
Share
Expand All
Daphne
11/02/25 7:01am
Ah, squeaking noises mostly indicate suspension issues. I've encountered this several times with my own car. If the sound comes from the chassis during acceleration, it's often due to cracked shock absorbers or rubber bushings, with rainwater accelerating corrosion. If the noise is more noticeable on bumpy roads, replace the parts immediately. Check the tires for foreign objects like small stones stuck in the tread, which can also cause squeaking. Don't ignore these sounds—wheel bearings might be wearing out, which can shorten their lifespan over time. I've taken mine apart myself; a repair kit online costs just over a hundred, but if you're not handy, it's best to consult a mechanic. Starting noises can affect handling, so safety comes first, especially when carrying family. During maintenance, apply some grease to suspension points as a preventive measure. In short, don't worry—it's a common minor issue.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What kind of car is the Chery A515?

Chery A515 is equipped with a 1.5-liter AETECO477F engine. Wheelbase: 2600MM, body dimensions: 4552×1750×1483mm. 1. Exterior: The appearance looks relatively rounded, adopting the popular "dome"-shaped design with curved lines. The front features a distinctive horizontal chrome grille with bold lines, while the rear now displays the A515 badge, making it easily recognizable. The car measures 4552×1750×1483mm with a 2600mm wheelbase. 2. Interior: As the A515 is an upgraded version of the original model, the interior and configurations have been enhanced for greater comfort and convenience. The leather interior is complemented by features such as electrically heated mirrors, automatic climate control, and an inverted trapezoidal metal center console with straight waterfall-style lines, offering a neat and straightforward layout. 3. Performance: The most significant change in the Chery A515 is the replacement of the engine. The 1.6-liter SQR481F engine from the A516 has been replaced with a 1.5-liter SQR477F engine, which is a self-developed 1.5L engine by Chery and has been recognized as one of China's top ten engines. This ACTECO 1.5L engine utilizes single overhead camshaft four-valve (SOHC-16V) technology, featuring a simple structure, easy maintenance, and low cost. It delivers a maximum power of 80KW/6000rpm and a maximum torque of 140N.m/4500rpm, with "low-speed high torque" and "dual-peak high efficiency" characteristics, ensuring excellent performance in both urban and highway conditions. 4. Fuel efficiency: In terms of fuel consumption, the A515 Value Edition achieves a mere 5L per 60km at constant speed. Its exceptional fuel economy and ultra-low operating costs make it a great value for money.
12
1
Share

What engine is used in the Haval H9?

Haval H9 is equipped with a 2.0T inline 4-cylinder turbocharged engine, with a maximum power of 165 kW and a maximum power speed of 5,000 rpm. The maximum torque is 385 Nm, the cylinder head is made of aluminum alloy, and the cylinder block is made of cast iron. It is matched with an 8-speed automatic transmission. The Haval H9 is a mid-to-large 5-door 5-seat SUV, with body dimensions of 4856mm in length, 1926mm in width, and 1900mm in height, and a wheelbase of 2800mm. The driving mode is front-engine four-wheel drive, the front suspension uses a double-wishbone independent suspension, and the rear suspension uses a multi-link non-independent suspension.
7
5
Share

How often should DSG transmission fluid be changed?

DSG transmission fluid should be changed every 40,000 to 60,000 kilometers. The method for changing transmission fluid is as follows: 1. Start the engine and warm it up to normal operating temperature; 2. Remove the drain bolt to allow the transmission fluid to flow out; 3. Wait until the old transmission fluid has completely drained, then reinstall the bolt; 4. Add new transmission fluid; 5. Start the car and perform gear shifting operations; 6. Check whether the transmission fluid level is normal. The functions of transmission fluid are: 1. To keep the gear system clean; 2. To prolong the service life of the transmission; 3. To resist low temperatures and provide effective lubrication even in cold conditions; 4. To reduce fluid loss under harsh operating conditions.
1
5
Share

How Often Should Carbon Brushes Be Replaced?

Carbon brushes should generally be replaced once a year. The function of carbon brushes is to reduce metal friction while extending the service life of components. The replacement procedure for carbon brushes is as follows: 1. Remove the spring clip of the carbon brush to be replaced; 2. Loosen the brush pigtail fastening screw with a specialized wrench; 3. Remove the brush pigtail and carbon brush; 4. Install the new carbon brush in the reverse order; 5. Verify that the generator's carbon brushes are operating normally. Precautions for replacing carbon brushes include: 1. No two people should work simultaneously; 2. Fasten clothing and cuffs during operation to avoid entanglement with rotating parts; 3. Stand on an insulating mat while working; 4. Avoid touching both poles simultaneously or one pole to ground; 5. Use the same model of carbon brushes for the same unit; 6. After replacement, monitor current and temperature parameters.
3
1
Share

How to Interpret a Vehicle Identification Number (VIN)?

Interpreting a vehicle identification number (VIN) involves the following steps: 1. Positions 1 to 3 represent the manufacturer, brand, and type; 2. Positions 4 to 8 indicate vehicle characteristics, category, chassis, engine model, and rated weight; 3. Position 9 is the check digit; 4. Position 10 denotes the model year of the vehicle; 5. Position 11 identifies the assembly plant; 6. Positions 12 to 17 represent the production sequence number. The requirements for using a VIN are: 1. All vehicles must have a VIN; 2. No two vehicles produced within 30 years may have identical VINs; 3. The VIN should preferably be located in the front half of the vehicle; 4. The VIN must be on a vehicle component that cannot be easily removed or damaged; 5. The VIN must be clearly marked, durable, and resistant to tampering or replacement.
12
0
Share

Is the new MG 5 a three-cylinder or four-cylinder?

The new MG 5 is a four-cylinder. Engine parameters used in the MG 5: The MG 5 uses two engines: one is a 1.5-liter naturally aspirated engine, and the other is a 1.5-liter turbocharged engine. The 1.5-liter naturally aspirated engine in the MG 5 has 120 horsepower and a maximum torque of 150 Nm. This engine reaches its maximum power at 6000 rpm and its maximum torque at 4500 rpm. Precautions for engine use are as follows: Avoid driving in neutral. The engine itself has a fuel-cut function during deceleration, and driving in neutral is not conducive to fuel economy. When using the vehicle, pay attention to observation. If oil is found on the ground, determine whether there is an engine oil leak and communicate with the car 4S store in time to eliminate potential safety hazards.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.