What Causes the Noise When Turning?

How to Reset the Bentley Continental Tire Pressure Light?

Press and hold the tire pressure warning reset switch (located above the brake pedal with a symbol matching the one on the dashboard) until the light turns off before releasing. Then press and hold again until it flashes three times before releasing. The reset is now complete. If the tire pressure monitoring system warning light illuminates while driving, immediately reduce speed, avoid sharp steering and sudden braking, and check the tires promptly. If equipped with a portable inflator or tire pressure gauge, pull over to the roadside and measure/inflate each tire as needed.

105

Share

What to Do If a Car Shock Absorber is Leaking Oil?

If oil leakage is detected, first tighten the oil cylinder cover nut. If the shock absorber continues to leak, it may be due to damaged or failed oil seals or sealing gaskets, and new seals should be replaced. If the leakage persists, pull out the shock absorber rod. If you feel resistance or uneven movement, further check whether the gap between the piston and the cylinder is too large, whether the shock absorber piston rod is bent, and whether there are scratches or marks on the piston rod surface or cylinder. Here are the symptoms of a damaged car shock absorber: 1. Drive the car on a road with poor conditions for 10 kilometers and then stop. Touch the shock absorber housing by hand. If it is not hot enough, it indicates there is no resistance inside the shock absorber, meaning it is not working. At this time, add an appropriate amount of lubricating oil and test again. If the housing becomes hot, it means the shock absorber is low on oil and should be refilled. Otherwise, the shock absorber is faulty. 2. Press the bumper firmly and then release it. If the car bounces no more than once or twice, the shock absorber is working well. 3. When the car is driven slowly and emergency braking is applied, if the car vibrates severely, it indicates a problem with the shock absorber. 4. Remove the shock absorber and stand it upright. Clamp the lower connecting ring in a bench vise and pull and press the shock absorber rod several times. There should be stable resistance during this process, with the resistance during upward recovery being greater than during downward pressing. If the resistance is unstable or absent, it may be due to insufficient oil inside the shock absorber or damaged valve components, which should be repaired or replaced.

111

Share

Where to add windshield washer fluid for Audi A5?

Audi A5's windshield washer fluid is added to the independent washer fluid reservoir in the engine compartment, with a unified washer fluid symbol on the cap. The Audi A5 dashboard has a washer fluid level indicator light that will start flashing when the fluid is running low during driving. The Audi A5 is positioned as a premium two-door coupe, with body dimensions of 4712mm in length, 1854mm in width, and 1391mm in height. The Audi A5 features a new high-tech four-cylinder engine - a 1.8-liter TFSI engine with 125 kW (170 horsepower) output, combining turbocharging technology and direct fuel injection for powerful performance.

119

Share

What is China 6?

China 6 is the sixth-stage national standard for pollutant emissions from motor vehicles. It is a standard formulated to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent and control pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The China 6 standard is divided into two phases: 6A and 6B. The first phase, starting from July 1, 2020, prohibits the sale, registration, and licensing of vehicles that do not meet the 6A emission standard. The second phase, starting from July 1, 2023, prohibits the sale, registration, and licensing of vehicles that do not meet the 6B emission standard. The above dates represent the national timeline for implementing the China 6 standard, but some regions have already determined to enforce this standard ahead of schedule.

112

Share

What is the reason for the yellow engine light in the Buick Excelle?

The reason for the yellow engine light in the Buick Excelle is to alert the owner that there is a fault in the vehicle's engine or transmission. When the yellow engine fault light comes on, no fault may be noticeable in the short term, but continuing to drive risks causing damage to the vehicle. The Buick Excelle is equipped with a 1.3T 48V mild hybrid engine and a 1.5L DVVT four-cylinder engine, comprehensively balancing power, fuel consumption, and a good driving experience. The diverse options meet the needs of different consumers, providing owners with an efficient and agile power experience. In terms of body size, the Buick Excelle measures 4609mm in length, 1798mm in width, and 1486mm in height.

101

Share

How to Turn Off the Car Interior Light?

The switch for the car's interior lighting is generally located above the middle area between the driver's seat and the front passenger seat. The interior light switch has several modes that can be toggled. To turn off the interior light, simply switch it to the off mode.

119

Share