···
Log in / Register

What Causes the Front Wheel Noise in Geely Jiayue?

1Answers
FernandoLynn
07/29/2025, 02:01:14 PM

The reasons for front wheel noise in Geely Jiayue are as follows: Inaccurate wheel alignment: Inaccurate four-wheel alignment of the vehicle can cause significant tire wear during long-distance driving, leading to uneven tire wear and resulting in abnormal noise. Damaged wheel bearing: This phenomenon occurs when a wheel bearing of the vehicle is damaged. Long-distance driving places high demands on wheel bearings. Bearings of poor quality or those that have been used for a long time may fail due to fatigue under prolonged high-speed operation, causing abnormal noise. Prolonged high-speed engine operation: During prolonged high-speed operation, some of the carbon deposits inside the engine will burn off due to high temperatures and be expelled with the exhaust. This is commonly referred to as why the vehicle feels smoother after high-speed driving. However, some engine control systems may not immediately adapt to the reduced carbon deposits in individual cylinders. If the engine control unit continues to use previous adaptation values for fuel injection and ignition, it can cause changes or instability in idle speed.

Was this review help?
110
Share
More Q&A

Can I Drive on the Highway After a Tire Repair?

Yes, you can drive on the highway after a tire repair. A repaired car tire is functionally equivalent to its original state and meets the driving conditions required for highways. A tire is a circular elastic rubber product mounted on various vehicles or machinery, designed to roll on the ground. Typically installed on metal rims, it supports the vehicle body, absorbs external shocks, maintains contact with the road surface, and ensures driving performance. Highways should clearly indicate the speed limits for each lane, where the maximum speed must not exceed 120 km/h, and the minimum speed should not be below 60 km/h. On highways, the speed of small passenger vehicles must not exceed 120 km/h, other motor vehicles must not exceed 100 km/h, and motorcycles must not exceed 80 km/h.
106
Share

Why does the Focus use a three-cylinder engine?

The Focus uses a three-cylinder engine to reduce exhaust emissions. The Focus is a compact sedan under the Ford brand, equipped with two engines: a 1.5L naturally aspirated engine with a maximum power of 90kW and a maximum torque of 153Nm, and a 1.5T turbocharged engine with a maximum power of 128kW and a maximum torque of 243Nm. The dimensions of the Focus are 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm. The car features front-wheel drive, a front MacPherson strut independent suspension, and a rear torsion beam non-independent suspension.
107
Share

What is the working principle of an electromagnetic clutch?

Electromagnetic clutch works by controlling the engagement and disengagement of the clutch through the energization and de-energization of the coil. It is a friction-type clutch where the clamping force is generated by electromagnetic force, enabling remote control with minimal control effort, making it suitable for automation. The function of the electromagnetic clutch is to transmit torque and power from the driving shaft to the driven shaft in various mechanisms, achieving rapid start, braking, forward/reverse rotation, or speed regulation. Utilizing the principle of electromagnetic induction and the friction between inner and outer friction plates, the electromagnetic clutch is an electromechanical connector that allows two rotating components in a mechanical transmission system to engage or disengage without stopping the driving component, serving as an automatically operated electrical device.
106
Share

Why does the oil light come on when there is no lack of oil?

Here is an introduction to why the oil light comes on even when there is no lack of oil: 1. Possible faults include: The oil has not yet reached the oil alarm (sensor) at the moment of starting, damage to the oil alarm, loose wiring, or poor operation of the oil pump. 2. Introduction: Engine oil, also known as engine lubricant, has a density of approximately 0.91×10³ (kg/m³). It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber for the engine. It is known as the 'blood' of the car. Engine oil consists of two parts: base oil and additives.
103
Share

How many months must pass before a transferred vehicle can be exchanged?

The normal processing period for exchanging and transferring an old vehicle is 30 days. More information about vehicle transfer is as follows: 1. Overview: Vehicle transfer refers to changing the name of the vehicle's owner, which is an essential procedure in the process of buying and selling used cars. Vehicles involved in accidents, failing annual inspections, being stolen, or being smuggled cannot be transferred through normal procedures. 2. Notes: When a vehicle is relocated from one city to another, the registration process for changing the affiliated vehicle management authority is called transfer of registration. Transfer of registration requires changing the license plate and vehicle license, and the procedures must be completed at two vehicle management authorities, including the transfer-out procedure and the transfer-in procedure.
114
Share

What Causes Transmission Whining Noise?

Excessive gear meshing clearance in the transmission. When the gear meshing clearance is too large, the driving gear impacts the driven gear during rotation, producing knocking sounds that typically worsen as transmission temperature rises. Conversely, when the meshing clearance is too small, the abnormal noise tends to be continuous - sometimes uniform, sometimes irregular - intensifying with vehicle speed and often causing transmission lubricant overheating. Additional note: Gear noise may also result from damaged gear tooth surfaces, producing irregular yet rhythmic sounds that amplify with throttle input. In severe cases, transmission vibration may be felt.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.