What causes oil discharge from the exhaust under exhaust brake operation?

What to Do When Hitting the Corner While Backing into a Parking Space?

When you frequently hit the corner while backing into a parking space, the main reason is not mastering the timing of steering wheel operation. The specific aspects are as follows: If you turn the steering wheel too early when backing into a parking space, the wheels will be too close to the corner during right-side parking. Align the shoulder line with the right-side marker and turn the wheel back one full turn. When the rear of the car passes the right corner and you notice the curve is increasing and gradually moving left, turn the wheel fully to the right again. Once the car is straight, return the wheel one and a half turns to the center position. If the right side of the car is about to hit the right corner, straighten the wheel, drive backward a short distance, and once the rear of the car enters the parking space, turn the wheel fully to the right again. When the car is straight, return the wheel one and a half turns to the center position. When the right side of the car is 30 cm away from the top right corner (about two fingers width in the mirror), turn the wheel half a turn to the left. Once the rear of the car passes the top corner and is fully inside the parking space without any change in the entering curve, check the left mirror and return the wheel one full turn when the car is straight, then back into the space. Another situation is turning the steering wheel too late. It's best to minimize the number of adjustments and steering turns while backing into a parking space, and try to complete them before entering the parking space. The key is to learn to judge the 30 cm distance between the car body and the corner, which requires practice and experience.

105

Share

What are the methods to reduce tire noise in cars?

Methods to reduce tire noise in cars include: 1. Switching to noise-reducing tires; 2. Performing sound insulation treatments on the vehicle, such as chassis armor, engine compartment insulation, and cabin insulation, all of which can help reduce tire noise. Tire noise is generated by the friction between the tires and the road surface when the vehicle is driving at high speeds, and its intensity depends on road and vehicle conditions—the worse the road conditions, the louder the tire noise. The functions of tires are: 1. Supporting the entire weight of the vehicle and bearing the load of the car; 2. Transmitting traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reducing and absorbing vibrations and impacts during driving, preventing severe vibrations and premature damage to vehicle components; 4. Adapting to the high-speed performance of the vehicle and reducing driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency.

120

Share

What is the tutorial for using the Changan CS75 key?

To use the key for the Changan CS75, insert the car key into the ignition system, then press the button inside the car or turn the guide plate to start the engine. Below is more information about the Changan CS75: 1. The Changan CS75 is positioned between the CS55 and CS95, classified as a compact SUV. The CS75 is equipped with the Blue-core series of engines. In terms of power, the Changan CS75 offers two engine options: a 2.0L naturally aspirated engine with a maximum power output of 158 horsepower, and a 1.8L turbocharged engine with a maximum power output of 177 horsepower and a peak torque of 230N·m. These are paired with a 6-speed manual transmission and Aisin's new-generation 6-speed automatic manual transmission. 2. The vehicle features an intelligent panoramic sunroof with dimensions of 850mm*1335mm, providing a lighting area of 1.12 square meters; the rear seats can be folded flat at 180°, offering ample space.

101

Share

How to Reset the Maintenance Light on Dongfeng Peugeot?

Turn off the ignition switch. Then press and hold the "000" trip reset button. Turn on the ignition switch, and the odometer will start counting down. When the display shows "Initialization completed" or "=0", it means the maintenance light has been reset. Finally, release the button, and the wrench symbol (maintenance indicator light) will disappear.

119

Share

How to Adjust Wiper Arm Pressure?

Flathead screwdriver, two adjustable wrenches (one for fixing, one for adjusting, or pliers can be used as a substitute). Lift the wiper blade along the angle of the windshield for a certain distance, then raise the wiper arm outward. To prevent accidental damage during maintenance. Place a towel over the wiper arm to avoid scratching the paint during adjustment. Use one wrench to secure the elbow, and gently twist the other wrench in different directions. If the wiper pressure is too high, add a pull ring at the hook. This reduces the spring's extension, thereby decreasing the pressure.

106

Share

Does the 2021 Buick Encore GX have a four-cylinder engine?

2021 Buick Encore has not been launched yet, and it is unclear whether it will be equipped with a four-cylinder engine. Here is more information about the Encore: 1. The Encore is developed based on GM's small crossover platform, featuring a coupe-style design rarely seen in SUVs and excellent power performance for a small SUV. 2. The 2020 Buick Encore is equipped with a 1.3-liter 165-horsepower three-cylinder turbocharged engine, paired with a CVT continuously variable transmission and a nine-speed manual/automatic transmission. 3. The new generation Encore family mainly includes two models: the Encore and the Encore GX. The Encore is positioned as a premium small SUV, while the Encore GX is a premium compact SUV.

115

Share