···
Log in / Register

What Causes Excessive Fuel Injection?

1Answers
Peterson
07/24/2025, 11:21:20 PM

Excessive fuel injection may be caused by fuel injector dripping or damage, poor atomization of the injector, stuck needle valve, or excessive return fuel. Here is more information about fuel injection: 1. The fuel injection volume is controlled by the computer; 2. The computer calculates based on various engine operating parameters measured by sensors, such as intake air volume, engine speed, throttle opening, water temperature, intake air temperature, etc., according to the set program, and sends electrical pulses to the injector based on the calculation results; 3. The duration of each fuel injection is controlled by changing the width of each electrical pulse, thereby achieving the purpose of controlling the fuel injection volume. The wider the electrical pulse, the longer the fuel injection duration, and the greater the fuel injection volume.

Was this review help?
120
Share
More Q&A

Do I still need to buy a phone holder if I have CarPlay?

You don't need to buy a phone holder if you have CarPlay. Your phone can be mirrored to the car's display. Introduction to CarPlay: CarPlay is an in-car system released by Apple Inc. in the US, which seamlessly integrates users' iOS devices and iOS user experience with the dashboard system. Interfaces supported by CarPlay: CarPlay only supports iPhones with Lightning connectors. Although iPads also support this interface, Apple has not included iPads as hardware devices supported by CarPlay. On June 13, 2016, Apple announced at the WWDC developer conference that its smart car system CarPlay would be updated along with iOS 10, becoming the perfect partner for the new version of Apple Maps and Siri.
109
Share

What engine is equipped in the Shuailing e?

The Shuailing e is equipped with the 4DA1 series engine. Principle of turbocharging: A turbocharged engine relies on a turbocharger to increase the engine's air intake. The turbocharger is essentially an air compressor. It uses the exhaust gases from the engine as power to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses fresh air delivered through the air filter pipe and sends it into the cylinder. As the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, thereby enhancing the air compression level. This correspondingly increases the engine's air intake and output power. Function of turbocharging: The main function of turbocharging is to increase the engine's air intake, thereby improving the engine's power and torque, making the vehicle more powerful.
102
Share

What Engine Displacement is Needed for a Motorcycle Wheelie?

There is no specific requirement for engine displacement when performing a motorcycle wheelie. Here are the details: 1. Below 600cc: For motorcycles under 600cc, performing a wheelie requires popping the clutch while stationary. For 600cc sport bikes, the front wheel will lift off the ground by itself when giving full throttle in first or second gear while the bike is moving. 2. 1000cc+: For motorcycles with 1000cc or more, the front wheel will lift off the ground when giving full throttle in third or fourth gear. Below is additional information on motorcycle wheelie techniques: 1. Method one: Lift the front wheel after the bike starts moving, practice while stationary. First, keep both feet on the ground, engage first gear, rev the throttle with the right hand while popping the clutch with the left hand, and simultaneously pull the handlebars upward with both hands. At this point, push off the ground with both feet, adopting a posture that lifts the bike upward, and the front wheel will easily leave the ground. 2. Method two: After starting the bike, while moving slowly, pull the clutch, rev the throttle, and quickly release the clutch to utilize the strong torque of first or second gear to lift the front wheel.
103
Share

What is the fuel tank capacity of the Changan CS55 in liters?

The fuel tank capacity of the Changan CS55 2019 1.5T Manual Xuanse Type China VI is 58L. It is equipped with a 1.5L turbocharged engine and a 6-speed manual transmission (MT). The drivetrain is front-engine, front-wheel drive. The front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. In the same vehicle class, the fuel tank capacity of the Fengxing T5 2022 Shengshi 1.6L Manual Zhumeng Edition (5-seater) is 45L, and the fuel tank capacity of the Trumpchi GS4 2022 270T Manual Comfort Edition is 55L. During actual refueling, the amount of fuel may exceed the nominal capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level, and there is additional space from the safe fill level to the tank opening. This space ensures that the fuel can expand when temperatures rise without overflowing. If fuel is filled up to the tank opening during refueling, the actual refueling amount may exceed the nominal capacity. To check the remaining fuel level, the driver can observe the fuel gauge on the right side of the instrument panel, which is marked with 'E' and 'F'. When the needle is near 'E', it indicates low fuel, and when it is near 'F', it indicates a full tank.
118
Share

What is the displacement for a 50kw engine?

50kw is the power of the engine, equivalent to 68 horsepower. It is not related to displacement. Definition of displacement: Displacement (Swept-volume), a specialized term in hydraulic transmission, refers to the volume of fluid inhaled or exhausted per stroke or cycle. Generally, a larger displacement means the engine releases more energy (converting chemical energy of fuel into mechanical energy) per unit time, which translates to better "power performance". Common vehicle displacements: Most sedans have displacements of 1.4T, 1.6L, 1.8T, 2.0L, 2.4T, etc. Most mid-size SUVs start with at least a 2.0T engine or a naturally aspirated engine above 2.4L.
119
Share

Should You Shift to Neutral or Keep Your Foot on the Brake at a Red Light?

When waiting at a red light, if the duration is relatively long, the better practice is to shift the car's gear to Neutral (N) and then engage the handbrake. Although this method is slightly more cumbersome, it significantly improves safety compared to keeping the car in a low gear. If the red light is about to turn green in just a few seconds, you can simply keep your foot on the brake while remaining in Drive (D) gear. Below is an introduction to automatic transmissions and braking: Impact of Prolonged Braking: Prolonged braking generates heat due to friction between the brake pads and brake discs. If this heat accumulates and is not dissipated in time, excessive heat can lead to a reduction in braking efficiency, affecting driving safety. Therefore, it's important to be mindful of braking duration and to regularly inspect and replace brake components. Introduction to Automatic Transmissions: An automatic transmission, as the name suggests, eliminates the need for the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typically, an automatic transmission car has six gear positions, arranged from top to bottom as: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low). For general driving needs, using just P (Park), R (Reverse), N (Neutral), and D (Drive) gears is sufficient. However, specific driving conditions may require the use of other functional gears.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.