···
Log in / Register

What brand is Triangle tire?

1Answers
QuinnLynn
07/24/2025, 07:26:37 PM

Triangle is Triangle Tire, formerly known as Weihai Tire Factory founded in 1976. The company's products cover six series including commercial vehicle tires, passenger car tires, bias engineering tires, radial engineering tires, giant tires, and special tires. Triangle's car tires are suitable for high-speed driving, with good heat dissipation, stability, handling, low noise, and high safety. Triangle's industrial tires are highly efficient and wear-resistant, widely used in forklifts, battery cars, and flatbed trucks, commonly seen in factories, ports, docks, logistics, and other fields. The market covers more than 180 countries and regions worldwide, with marketing branches in North America, Europe, Central and South America, Australia, Southeast Asia, the Middle East and Africa, Russia, India, and other places. Triangle Tire has received official product quality certifications from 60 countries or major economies worldwide, including CCC, ECE, DOT, INMETRO, LATU, GSO, SNI, etc. In China, it provides supporting services for more than 50 automobile companies such as China National Heavy Duty Truck Group, FAW Jiefang, Jiangling Motors, King Long Bus, Yutong Bus, Zhongtong Bus, SAIC-GM-Wuling, FAW Car, Zhengzhou Nissan, Changan Suzuki, and Jiangling Motors. Tires are one of the most important components of a car. Their main functions include: Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; Transmitting traction and braking torque to ensure good adhesion between the wheel and the road surface, improving the car's power, braking, and passability; working with the car's suspension to cushion the impact during driving and dampen the resulting vibration; Preventing severe vibration and early damage to car components, adapting to the vehicle's high-speed performance, reducing driving noise, and ensuring driving safety, handling stability, comfort, and energy efficiency. Triangle Tire maintenance methods: Increase awareness of tire safety and check tires regularly; Regularly correct wheel balance. Unbalanced wheels will produce high-frequency swings during high-speed driving, causing uneven tire wear; Regularly rotate tires. To maintain even wear on the same vehicle, tires should be rotated every 5,000 kilometers. In daily use of Triangle tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, and other defects. Due to driving wear, the tread grooves gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-slip functions, significantly reducing the car's performance. Small cracks can be a hidden danger of tire blowouts during high-speed driving. Additionally, stones in the grooves should be removed immediately; Try to park on flat ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials related to rubber deterioration. After parking, the driver should not turn the steering wheel, as this will accelerate tire wear; Do not splash water for cooling. In hot weather or during high-speed driving, tires are prone to overheating, and the pressure will increase. In this case, stop to cool down. Do not deflate or splash water to cool down, as this may cause abnormal aging of the tread rubber; Avoid sudden braking. Try to minimize frequent use of brakes and emergency braking to prevent accelerated tread wear due to dragging between the tire and the ground.

Was this review help?
108
Share
More Q&A

What type of driver's license is required to drive a medium-sized bus?

To drive a medium-sized bus, a B1 driver's license is required. The B1 license allows the holder to operate medium-sized passenger vehicles (including urban buses with a capacity of 10 to 19 passengers) as well as vehicle types C1, C2, C3, C4, and M. The first category is medium-sized buses with fewer than 19 seats. The second category is medium-sized passenger vehicles with 19 to 32 seats. The third category is urban buses. Additional information: Requirements for upgrading from C1 to B1: The applicant must have held a C1 driver's license for at least three years, with no record of full penalty points in the last two scoring cycles, no record of drunk driving, and no record of being primarily or fully responsible in a fatal accident. The applicant must be between 21 and 50 years old, with a height of at least 155 cm, and have uncorrected or corrected visual acuity of 5.0 on the logarithmic visual acuity chart. The upgrade can only be processed at the applicant's registered residence location. Only those who meet all the above conditions can apply for the B1 license upgrade.
104
Share

How to Adjust the Valve Clearance of the Aowei 13-liter Engine?

Locate the top dead center of the first cylinder piston at the end of compression, adjust half of the valves, then rotate the crankshaft one full turn to adjust the remaining half of the valve clearances. When adjusting the valve clearances of the engine, besides paying attention to the adjustment sequence, the size of the clearance is also crucial. If the valve clearance is adjusted too small, the valve may not close tightly, leading to a decrease in engine power. If the clearance is adjusted too large, it will increase the number of impacts on the valve train components, accelerating wear. It may also cause delayed valve opening, resulting in reduced engine performance and inability to operate normally. Precautions for engine use are as follows: 1. Overheating: If the engine overheats while driving, you can release the accelerator pedal, shift the transmission to a lower gear, or perform both actions simultaneously to reduce power output until the engine temperature returns to the normal operating range. 2. High-sulfur fuel: Under certain operating conditions, such as low speed, low load, or starting a work cycle after shutdown, the operating temperature of the engine's after-treatment catalyst may not be very high. If unauthorized high-sulfur fuel is used, ammonium sulfate may accumulate on the catalyst, reducing the NOx conversion efficiency in the SCR system. As a result, the engine may fail to meet emission regulations.
112
Share

What is the refrigerant in the air conditioner called?

Refrigerant is also known as refrigeration working fluid. Here is an introduction to refrigerant: 1. In some southern regions, it is commonly known as "snow seed." It is a working substance that continuously circulates in the refrigeration system and achieves cooling through changes in its own state. 2. The refrigerant absorbs heat from the cooled medium (such as water or air) in the evaporator and vaporizes, then transfers the heat to the surrounding air or water in the condenser and condenses. Precautions for adding refrigerant to a car: 1. Before using the machine, the oil plug on the vacuum pump must be replaced, and the exhaust oil plug must be swapped out. 2. The vacuum gauge must not be subjected to high pressure. The vacuum gauge valve V3 must be closed before connecting the high and low-pressure pipes and adding refrigerant. 3. The force used to close the valves should be moderate. Tightening force should be minimized as much as possible without causing leaks to extend the service life of the valves. However, even if the sealing parts are damaged after long-term use, repair and replacement are very simple. 4. Pure refrigerant without solid impurities should be used. 5. All valves must be closed after the operation is completed.
119
Share

Which brand is the transmission of the Volvo S90?

The Volvo S90 uses an 8AT transmission. Here are the relevant details about the AT transmission: 1. The AT transmission technology is mature and widely used. 2. The AT transmission is connected to the engine via a torque converter, providing relatively smooth shifting. 3. The AT transmission consists entirely of planetary gears, relying on them for speed and torque variation. 4. The 8AT transmission offers high transmission efficiency and smooth shifting. 5. It can quickly respond to changes in engine speed, shift smoothly, and effectively utilize the engine's torque and power range with multiple selectable gear ratios.
106
Share

What does the classic Focus fault code p2008 mean?

The classic Focus fault code p2008 may indicate a vacuum solenoid valve malfunction. The vacuum solenoid valve is a specialized valve installed on a mechanical vacuum pump. The valve and the pump are connected to the same power source, so the pump's activation and deactivation directly control the valve's opening and closing. When the pump stops working or the power is suddenly interrupted, the valve automatically seals the vacuum system and allows atmospheric air to enter the pump chamber through the pump's intake port, preventing pump oil backflow from contaminating the vacuum system. Here are some related details: 1. The vacuum solenoid valve is suitable for working with air and non-corrosive gases. Its primary function is to activate the vacuum pipeline when the solenoid valve circuit is energized after the engine starts, enabling the vacuum control valve to operate. Different vacuum control valves can perform functions such as opening/closing flaps, increasing idle speed, and operating door locks, and are commonly used in automotive air conditioning systems. 2. In the air conditioning system, the vacuum solenoid valve plays a role in energizing the electromagnetic clutch circuit while also activating the vacuum switching valve's electromagnetic coil. The vacuum switching valve increases the throttle opening of the carburetor via a control rod, thereby raising the idle speed.
110
Share

How to reset the tire pressure warning light on a 2017 Outlander?

The method to reset the tire pressure warning light on a 2017 Outlander: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "dong" sound before releasing it. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, completing the tire pressure reset. Precautions for inflating tires: Always use a pressure gauge to check the tire pressure to avoid over-inflation, which could cause the tire to burst. After stopping the vehicle, wait for the tires to cool down before inflating, as the tire temperature rises during driving, affecting the pressure. Check the valve stem. If the valve stem and valve core are not properly aligned, have protrusions or depressions, or other defects, it may be difficult to inflate or measure the pressure. Pay attention to cleanliness when inflating. The air being pumped in should not contain moisture or oil, as this could deteriorate and damage the inner tube rubber. Do not exceed the standard pressure too much when inflating and then release air, nor should you over-inflate the tires because you haven't been able to inflate them for a long time while traveling. Exceeding the standard pressure too much can cause the cords to overstretch, reducing their strength and affecting the tire's lifespan.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.