What brand is the tire with a scorpion logo?

What to Learn First in Subject 2?

In Subject 2, you generally start by familiarizing yourself with the gear positions and related equipment inside the car, then practice driving straight, followed by reverse parking. Each instructor may have a slightly different order, but the overall process includes reverse parking, parallel parking, 90-degree turns, curve driving, and hill starts. Below are the relevant details: 1. Reverse Parking: Since the clutch travel of the exam car may differ from the training car, it's crucial to get a feel for the clutch height before starting the reverse parking section. Maintaining a steady speed—neither too fast nor too slow—ensures you won't miss the steering timing even under exam pressure, and allows ample time for adjustments. 2. Parallel Parking: Similar to right-side reverse parking, controlling the speed well makes it easier to hit the reference points and steer at the right time. Pay special attention to both side mirrors to avoid crossing the lines, so the final left full-lock steering timing is critical. 3. 90-Degree Turns: It's recommended to use the shoulder line and the corner of the test lane as reference points, as they won't vary much even with a different exam car. 4. Curve Driving: During curves, observe both side mirrors closely and adjust promptly. 5. Hill Starts: Hill starts heavily test your skill in using the clutch's half-engagement point. Start slowly, and when the clutch reaches half-engagement, release both the clutch and brake gradually—releasing too quickly may stall the engine.

101

Share

How to Reduce Wind Resistance in Cars?

Having a flat underbody and fully utilizing the ground effect can both reduce wind resistance in cars. Here are some related introductions on reducing wind resistance: 1. Flat underbody: A flat underbody not only reduces the resistance of airflow passing through but also minimizes the lift generated by turbulence. The ideal underbody consists of a complete lightweight underbody armor, but this is generally not cost-effective from a financial perspective. Electric vehicles do not have an exhaust system, so their underbody design is naturally flatter. With reasonable component layout, they usually achieve better aerodynamic performance. 2. Fully utilize the ground effect: The ground effect involves using body skirts to divert airflow that would otherwise pass under the car to the sides of the vehicle, while also reducing the amount of airflow entering the underside. This creates a low-pressure area between the car and the ground, resulting in a pressure difference between the body and the underbody, generating additional downforce. This enhances tire grip, reduces rolling friction, and improves energy efficiency. 3. Various airflow guiding devices: At points where the vehicle's body shape changes by more than 12 degrees (such as the rear), using aerodynamic devices like spoilers and diffusers can improve the vehicle's aerodynamic performance. The principle is to guide airflow more smoothly over the body, preventing turbulence around the vehicle.

108

Share

What is the method for replacing the battery in a Geely car key?

Here is the method for replacing the battery in a Geely car key: 1. When replacing the battery in a Geely car key, first purchase a button battery that is the same as or of the same type as the original. Then, use a small screwdriver to remove the small screws around the back. Next, press a small button on the side to remove the mechanical key inside, and then use a sharp object to pry open the back cover. 2. Gently pry it open from the edge, and you will see a slot for the button battery inside. Use your fingernail to pry it open and remove the old battery. 3. Use a soft brush to clean off any dust, ensuring it is in the cleanest state possible, and then insert the new battery in the same orientation as the old one. 4. When placing the new battery, be careful not to reverse the positive and negative poles, as this can easily cause a short circuit and damage the internal circuit board. Additionally, try to prevent the car key from getting wet, and replace the battery promptly when it runs out of power.

103

Share

What type of suspension does the GAC Trumpchi GS4 have?

GAC Trumpchi GS4 adopts front MacPherson and rear four-link independent suspension. The following is a related introduction about independent suspension: 1. The suspension system is the general term for all force-transmitting connection devices between the car frame and the axle or wheels. 2. The suspension system is a crucial system in modern automobiles. The following is an introduction to the functions of the suspension system: 1. It transmits forces and moments between the wheels and the frame, buffers the impact force transmitted from uneven road surfaces to the frame or body, and dampens the resulting vibrations to ensure smooth driving. 2. The suspension system should have the function of supporting the body and improving ride comfort.

111

Share

What does clearance light mean?

Here is the relevant introduction about clearance lights: 1. A clearance light is a warning light used to alert other vehicles. 2. Clearance lights are located at the outermost edges of the front and rear of the vehicle. Large trucks also have clearance lights on the roof and sides. Installed along the top edges of the vehicle, these lights indicate both the height and width of the vehicle. 3. Requirements for the number, configuration, layout, color, installation position, and circuit connections of clearance lights. Without altering the existing connection method, adding a red light distribution surface to the back of the front clearance light can incorporate the function of a rear clearance light. This approach eliminates the need for new installation positions on the cab and saves costs.

116

Share

What to Do If a Car Tire Bursts on the Highway?

Here are the solutions if a car tire bursts on the highway: 1. Maintain a safe driving speed. On the highway, always keep a safe speed and be prepared to reduce speed if necessary. The probability of a tire burst at 80–90 km/h is much lower than at 140–150 km/h. 2. Do not press the brake pedal. Braking can actually cause the car to lose balance further, which is the worst thing to do. 3. Do not suddenly remove your foot from the accelerator; instead, gradually and slowly release it. It is recommended to maintain the throttle input momentarily and then slowly release it. The deceleration force from a tire burst is strong, and the car will still slow down rapidly.

111

Share