What brand is the original engine oil for Beijing Hyundai?

1 Answers
Pat
07/29/25 9:11pm
The original engine oil brand for Beijing Hyundai is Mobis. For later maintenance and oil changes, options include ordinary Great Wall 5W20, South Korean SK's 5W30, and Shell's premium engine oil. The original API-SM/GF-4-SAE-5W-20 engine oil for Beijing Hyundai needs to be replaced every 5,000 kilometers. The Beijing Hyundai Tucson is equipped with a 1.6 turbocharged engine, which requires 5W-30 full synthetic engine oil for maintenance. The Hyundai 4S directly supplies the original premium gasoline engine oil A5, 5W-30 (4L pack), suitable for the entire range of Langdong, Mistra, Elantra, IX35, Tucson, Verna, Santa Fe, and Sonata. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C, with higher values indicating better viscosity retention at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing engine oil in Beijing Hyundai vehicles is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug, catching the old oil in a pan until no more oil flows. Start the engine for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add the new engine oil through the filler cap on the engine valve cover, generally filling up to three-quarters of the bottle; Start the engine and let it run for 5 minutes, checking for leaks around the oil drain plug and oil filter. If any leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to check that the engine oil level is within the standard range.
Was this review help?
14
1
Share
More Forum Discussions

What is the function of a governor?

The functions of a governor are: according to the changes in diesel engine load, it automatically increases or decreases the fuel supply of the injection pump, enabling the diesel engine to operate at a stable speed. The governor is used to reduce non-periodic speed fluctuations in certain machines, an automatic adjustment device that can keep the machine speed constant or close to the set value. Precautions for using a governor are: 1. During the thunderstorm season, strong lightning strikes can cause instability in the power grid, easily leading to thyristor module breakdown and fuse burnout. It is advisable to temporarily stop using the equipment and resume operation only after the power grid stabilizes; 2. After the power is disconnected, the absorption capacitor continues to carry dangerous voltage. Do not open the governor for at least 2 minutes.
9
5
Share

What to do if the Levin cannot recognize the USB drive?

The solutions for when the Levin cannot recognize the USB drive are: 1. Format the USB drive and re-download the files in MP3 format; 2. Ensure the USB drive capacity does not exceed 16GB. The Levin is a compact car with body dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. The Levin is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW at 5200 to 5600 rpm, and a maximum torque of 185Nm, paired with a 10-speed continuously variable transmission.
10
2
Share

What engine is equipped in the Toyota Vios?

Toyota Vios is equipped with a 1.5L naturally aspirated engine. Taking the 2021 Toyota Vios as an example, it belongs to the compact car category with body dimensions of 4435mm in length, 1700mm in width, and 1490mm in height, a wheelbase of 2550mm, a fuel tank capacity of 42L, and a curb weight of 1070kg. The 2021 Toyota Vios engine delivers a maximum power of 81kW, reaching its peak power at 6000rpm, and a maximum torque of 138Nm. It is paired with a 5-speed manual transmission and features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
1
3
Share

Does it have any impact if the steering wheel is not straightened when the car is parked properly?

It does have an impact if the steering wheel is not straightened when the car is parked properly. The impacts include: 1. The wheels will pull the tie rods and prevent them from returning to their original position. At the same time, the gears of the steering wheel and the racks of the tie rods will remain under stress, which can accelerate the aging or deformation of these parts; 2. It puts significant pressure on the sidewalls of the tires. Since the sidewalls of tires are relatively thin, this can cause uneven force distribution on the tires, accelerating the aging and deformation of the tire sidewalls. Methods to avoid parking the car with the steering wheel not straightened include: 1. Consciously straighten the steering wheel when parking; 2. Judge whether the steering wheel is straightened based on the number of turns of the steering wheel.
18
3
Share

How to Remove Heavy Odor in the Car?

Methods to remove heavy odor in the car include: 1. Open all windows for ventilation before driving; 2. Place effective adsorbents like bamboo charcoal bags, activated carbon, and sachets inside the car; 3. Place lemons or grapefruit peels in the car; 4. Regularly clean the interior and hard-to-reach areas of the car. The reasons for heavy odor in the car are: 1. Odor caused by the air filter; 2. Extensive use of plastic and rubber materials in the interior; 3. Mold growth in the evaporator; 4. Eating or smoking inside the car. Methods to maintain the car's interior include: 1. Wipe leather seats with strong alkaline soap water; 2. Clean the seals promptly.
6
0
Share

How to Remove and Install Spark Plugs for Mazda 6?

Mazda 6 spark plug removal and installation method: 1. Remove the engine cover and unscrew the fixing screw of the high-voltage wire terminal; 2. Remove the high-voltage wire terminal, loosen the spark plug, insert the soft tube on the high-voltage wire terminal into the combustion chamber, and pull out the spark plug; 3. Align the new spark plug with the screw hole and tighten it with tools. The Mazda 6 is a mid-size car with a body size of 4670mm in length, 1780mm in width, 1435mm in height, a wheelbase of 2675mm, and a fuel tank capacity of 64L. It is equipped with a 2.0L naturally aspirated engine with a maximum power of 108kW.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.