···
Log in / Register

What brand are the tires on the Roewe RX5?

6Answers
McBrooklyn
08/27/2025, 10:34:07 PM

The tire brands for the Roewe RX5: models with 18-inch rims use Michelin tires; models with 17-inch rims use Cooper tires. Some vehicle production batches may have different tire brands. Tires are the only components of a car that come into contact with the ground, and they are crucial for the vehicle's driving stability and safety. Being rubber products, tires age over time with prolonged use, hence they require regular replacement. The Roewe RX5 is an internet SUV. In terms of body dimensions, it measures 4545mm in length, 1855mm in width, and 1690mm in height, with a wheelbase of 2700mm.

Was this review help?
116
Share
Teresa
09/09/2025, 03:57:57 AM

As a veteran technician with 10 years of experience, I frequently see Roewe RX5 owners coming to the shop for tire replacements. This model doesn't have a fixed brand for its factory tires - the manufacturer's strategy is to randomly match tires based on trim levels and production batches. Base models often come with Giti Comfort 228 or Maxxis Bravo HP series, which prioritize wear resistance and fuel efficiency, though they produce slightly more road noise. Higher trim versions get premium quiet tires like Michelin Primacy 4, offering noticeably better grip and more stable braking in wet conditions. You can check the brand markings on the tire sidewall. Once I encountered a 17-inch wheel owner whose car came with Bridgestone Dueler tires from factory, which was quite surprising. When replacing tires, I recommend sticking to factory specifications as incorrect sizes may affect ABS and tire pressure monitoring systems.

Was this review help?
20
Share
Expand All
PaulDella
10/23/2025, 10:02:06 PM

I've been driving my RX5 for three and a half years, and it originally came with Cooper Discoverer HTS tires. These urban SUV tires focus on comfort and wet performance, with good sidewall support that keeps body roll well-controlled during cornering. However, after 40,000 kilometers, I noticed a significant increase in tire noise. Last year, I switched to Hankook Ventus S1 evo3 tires, and the improvement in handling was remarkable. Actually, Roewe adjusts suppliers based on the model year—for instance, some 2022 models used Maxxis tires, while this year's new vehicles are seen equipped with Ventus tires. The key to choosing tires lies in the tire specification code, such as 235/50 R18. As long as the specifications match, switching to other major brands is perfectly fine.

Was this review help?
5
Share
Expand All
DelIsabella
12/06/2025, 09:25:21 PM

Over the years working at the tire shop, I've handled at least hundreds of RX5s. The original tire brands are truly diverse—I've personally seen Michelin, Goodyear, Giti, and Hankook. However, the most common is the 215/60 R17 Maxxis HP5, with deep tread patterns and excellent drainage, making it particularly suitable for rainy southern regions. Some owners worry about safety issues with mixed tire usage, but as long as the tread patterns on the same axle match, it's fine. I do advise everyone to regularly check the tire date code; if it's over five years old, consider replacing it, as rubber aging is more dangerous than wear. Next time you change tires, you might want to try the Chaoyang SU318—a domestic premium product with outstanding cost performance.

Was this review help?
2
Share
Expand All
Wayne
01/26/2026, 10:40:51 PM

The original tires on the Roewe RX5 are quite flexible, entirely dependent on the manufacturer's procurement strategy. Last year, when helping my cousin pick up the Max version, it came with Michelin Primacy tires featuring rim-protecting ridges on the sidewalls, which are especially suitable for beginners to prevent scratches. On the other hand, the batch of base models from the rental car company uniformly used Triangle tires, which are wear-resistant but offer slightly weaker grip. It's recommended that owners check the maintenance manual, as the last page usually lists the original factory-certified tire brands. For daily driving, pay attention to tire pressure—the Roewe's tire pressure monitoring system is highly sensitive and will alert at a deviation of just 0.3 bar. Maintaining standard tire pressure can extend tire life and improve fuel efficiency.

Was this review help?
20
Share
Expand All
LeClaire
04/22/2026, 03:52:17 AM

As automotive journalists, we have tested the tires on three generations of the Roewe RX5. After evaluating twenty configurations, we found that 18-inch wheels are mostly paired with Bridgestone Turanza, while 17-inch wheels predominantly feature domestic Linglong CrossWind tires. These tires emphasize different performance aspects—for instance, the Turanza's 3D groove design ensures rapid water drainage, making it ideal for rainy regions, whereas the Linglong's silica compound significantly improves fuel efficiency. Interestingly, hybrid versions often use low rolling resistance tires with a 'Green' marking on the sidewall. When selecting tires, pay attention to the speed rating—the factory minimum is V-rated (240 km/h). Avoid downgrading to H-rated tires to save costs, as this compromises high-speed stability. Regular wheel alignment is even more critical, as many uneven tire wear issues stem from improper suspension alignment.

Was this review help?
1
Share
Expand All
More Q&A

What Causes the Engine Fault Code for Misfire in Cylinder 3?

The main reasons are as follows: 1. Damage to external components: Mainly caused by components around the combustion chamber such as valves, valve seat rings, valve guides, and spark plugs. 2. Misfire due to the failure to ignite or delayed ignition of the air-fuel mixture in the cylinder: For the first scenario, it is usually recommended to check the spark plugs, clean the carbon deposits on the intake and exhaust valves, and inspect the turbocharger for any issues, such as wear or burning of the turbocharger impeller. For the second scenario, it is usually caused by an abnormality in a certain component or part, leading to unstable engine regulation by the ECU, which fails to meet the theoretical values calibrated by the ECU, resulting in misfire.
116
Share

Why does the Volkswagen transmission U0101 fail to start?

Volkswagen transmission trouble code U0101 causes the vehicle to fail to start due to loss of communication with the Transmission Control Module (TCM). Additional information: 1. Trouble code analysis: Modules connected to the high-speed GMLAN serial data circuit monitor serial data communication during normal vehicle operation. Operational information and commands are exchanged between modules. Pre-recorded information in the modules specifies which data needs to be transmitted between the serial data circuits of each virtual network. The receiver module monitors this information and uses some periodic messages as indicators of the transmitting module's operational status. The monitoring timeout is set at 250 milliseconds. Each message contains the identification number of the transmitting module. 2. Conditions for setting the diagnostic trouble code: The ignition switch is in the "Run" position, and communication with the transmission control module is lost for more than 12 seconds (scan cycle is 1 second). Actions taken when the diagnostic trouble code is set: For lost parameters, the module will use default values. Conditions for turning off the malfunction indicator lamp/clearing the diagnostic trouble code.
104
Share

Why is there a hissing sound after starting the car?

The reason for the hissing sound after starting the car is that there is damage or air leakage in the hose on the engine intake manifold. It should be repaired or replaced at a maintenance shop in time. The following is a related introduction to the intake manifold: 1. Meaning For carburetor or throttle body gasoline injection engines, the intake manifold refers to the intake pipe from the carburetor or throttle body to the intake port of the cylinder head. 2. Function: The function of the intake manifold is to distribute the air-fuel mixture from the carburetor or throttle body to the intake ports of each cylinder. For port fuel injection engines or diesel engines, the function of the intake manifold is only to distribute clean air to the intake ports of each cylinder.
112
Share

What are the reasons for the windshield washer fluid not spraying?

There may be several reasons why the windshield washer fluid does not spray: 1. The washer fluid level is too low: There is still water in the reservoir, but it does not reach the standard height, so it cannot spray. Try filling up the washer fluid. 2. The spray nozzle is clogged: If the spray nozzle is blocked by dust, the washer fluid cannot spray. Simply use a fine needle to clean the nozzle. 3. The washer fluid is frozen: In very low winter temperatures, the washer fluid may freeze. In this case, just park in a sunny area to let the fluid thaw naturally, then replace it with new antifreeze washer fluid. 4. Fuse or motor damage: If there is no sound from the motor when trying to spray the washer fluid, and the windshield wipers also do not work, then the issue may be a blown fuse or a damaged motor.
107
Share

How Long is the Battery Warranty for Volkswagen Tayron?

Volkswagen's new Magotan battery has a lifespan of 2-3 years, but as the car's electrical components age, the battery's load gradually increases, which may shorten its service life. Additional information about the battery is as follows: 1. Working Principle: When disconnecting the battery, always start with the negative terminal. Accidentally starting with the positive terminal may cause it to contact the vehicle's body ground, leading to a short circuit and damage to the car's electrical components. After removing the negative terminal, the vehicle's electrical system will be powered off, and the positive terminal can then be removed. Some high-end cars require the electrical system to remain powered during battery replacement, as disconnecting the battery may necessitate the use of a professional automotive diagnostic tool for decoding and matching. Therefore, before replacing the battery, it is essential to connect a backup battery in parallel with the car's battery (both terminals). 2. Precautions: Before installing a new battery, remove the old battery by detaching the mounting bracket or the bottom mounting bolts. Secure the battery bracket (tighten the bolts if there are bottom mounting bolts), install the positive terminal first, and cover it with the insulating sleeve. Then, install the negative terminal. At this point, the vehicle's electrical system is fully powered. After connecting both terminals, manually check if the battery terminals are securely fixed—they must not be loose. (Typically, repair shops apply petroleum jelly to the battery terminals after replacement to prevent oxidation and rust, which could affect conductivity and ease future removal.) Now, you can insert the key and start the engine to check for any abnormalities in the dashboard indicators. Usually, disconnecting the battery during replacement may cause some electrical components to malfunction temporarily, and the dashboard will display warning indicators.
111
Share

Can the car run normally in second gear without accelerating?

Second gear can allow the car to run normally without accelerating. Below is an introduction to gear shifting related content: 1. Shifting from first to second gear: The permissible range for first gear is 0-20 km/h, and shifting to second gear should occur at 15-20 km/h. 2. Shifting from second to third gear: The permissible range for second gear is 10-30 km/h, and shifting to third gear should occur at 25-30 km/h. 3. Shifting from third to fourth gear: The permissible range for third gear is 20-40 km/h, and shifting to fourth gear should occur at 35-40 km/h. 4. Shifting from fourth to fifth gear: The permissible range for fourth gear is 30-50 km/h, and shifting to fifth gear should occur at 45-50 km/h.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.