···
Log in / Register

What are the test items for Subject Three?

6Answers
DelElla
09/07/2025, 01:24:33 AM

Here is an introduction to Subject Three: 1. Project introduction: The test items for Subject Three include vehicle preparation, starting, straight-line driving, gear shifting operation, lane changing, parking by the roadside, passing through intersections, left turns at intersections, right turns at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. 2. Precautions: The speed during the Subject Three test is relatively flexible, so it is important to control the speed while driving. When changing gears, pay attention to the road conditions. If the road conditions are good, accelerate immediately. If the road conditions are congested, reduce speed appropriately. Therefore, during the test, it is necessary to analyze the road conditions, be flexible, and adjust the speed appropriately.

Was this review help?
116
Share
OPaige
09/19/2025, 12:41:26 AM

The third driving test has quite a few items. I just took it last year, and I remember it mainly involves actual on-road driving. When starting the car, you need to check the rearview mirror, press the clutch, shift into first gear, and slowly release the clutch. Then, when changing lanes, you must signal at least three seconds in advance and check the blind spot for any vehicles. When going straight through an intersection, you should slow down, look left and right, and ensure safety. For left and right turns, you need to watch the traffic lights, check for pedestrians and vehicles, and signal before turning. For U-turns, find a wide area and turn the steering wheel slowly. Pulling over is a key point—you must stop steadily and stay within about 30 cm from the roadside. When meeting another vehicle, slow down and yield, keeping a safe distance. For overtaking, first assess the road conditions clearly, then accelerate to pass. During the night test, you also need to turn on the headlights or parking lights and handle light changes. The examiner pays the most attention to safety details, such as accurate signaling and proper observation. I recommend practicing these items more and finding a good instructor to simulate real-road conditions. Remember every action and stay calm.

Was this review help?
11
Share
Expand All
Finn
11/02/2025, 01:04:34 AM

Having driven for over a decade, I recall that the core of the Subject 3 driving test is fundamental driving skills. Essential test items include starting and stopping, lane changing, driving straight through intersections, left and right turns, U-turns, pulling over, oncoming traffic handling, overtaking maneuvers, and night driving. The operations must meet strict standards: starting smoothly, stopping precisely without being too far from the curb; signaling and checking blind spots when changing lanes; not speeding through intersections while observing traffic lights and pedestrians; paying attention to turning angles and yielding; choosing the right spot for U-turns; and being proficient in switching lights during night tests. After the test, I realized these skills are directly applicable to daily driving—safety comes first. Particularly, pulling over and overtaking are prone to errors, so allocating extra practice time for these can ensure passing.

Was this review help?
17
Share
Expand All
DelLydia
12/16/2025, 12:08:33 AM

The items in the driving test (Subject 3) include starting, changing lanes, driving straight through intersections, turning left or right, making a U-turn, pulling over, meeting oncoming vehicles, overtaking, and driving at night. I was very worried about these when I was learning to drive. For starting, you need to check the vehicle condition and fasten the seatbelt first; when changing lanes, pay attention to the rearview mirror and blind spots; slow down at intersections and look left and right; remember to signal and check traffic lights when turning; pulling over is the hardest part, controlling the distance within 30 cm; slow down and yield when meeting oncoming vehicles; the night test focuses on the use of lights. My advice is to practice these details more, don’t be nervous during the test, take it one step at a time, and just ensure safety first. I passed smoothly this way.

Was this review help?
11
Share
Expand All
ClaireDella
02/05/2026, 12:57:41 AM

Bro, the driving test items for Subject 3 are all about getting you on the road—starting the car, changing lanes, going straight through intersections, turning left or right, making a U-turn, pulling over to park, meeting oncoming traffic, overtaking other vehicles, and nighttime lighting tests. Don't forget to shift gears and turn on the signal when starting; indicate early and check your blind spots when changing lanes; slow down and watch for red lights at intersections; park steadily and close to the curb; yield to pedestrians when turning; give way during oncoming traffic and prioritize safety when overtaking; and know when to turn lights on/off at night. A common mistake I made during my test was forgetting to signal—practice more to memorize the steps.

Was this review help?
7
Share
Expand All
TaliaAnn
04/30/2026, 05:04:35 PM

It's been years since I took the Driving Test Part 3, but I remember the items clearly: starting and stopping, lane changing, going straight through intersections, left and right turns, U-turns, pulling over, meeting and yielding to oncoming vehicles, overtaking, and night driving. Starting should be smooth without stalling; signal early when changing lanes and check the position of the car behind; slow down and pass through intersections safely; pay attention to angles and yielding when turning; park precisely within 30 cm of the curb; slow down and maintain distance when meeting oncoming vehicles; assess road conditions before overtaking; and test lighting controls at night. The key lies in standardized operations—examiners value observation skills and speed control. It's recommended to practice more on actual roads and not rush for quick success.

Was this review help?
1
Share
Expand All
More Q&A

What is the difference between an L3 engine and an L4 engine?

The difference between an L3 engine and an L4 engine lies in the number of cylinders: the L3 is a three-cylinder engine, which has a simple structure, small size, and light weight; the L4 is a four-cylinder engine with a relatively more complex structure. The 'L' stands for inline, and the number following it indicates the engine code. Currently, the main types of engines used in automobiles are L3, L4, L5, and L6. An inline engine is one where all cylinders are arranged side by side in a single plane. It features a simple cylinder block and crankshaft structure, uses a single cylinder head, and offers high stability, good low-speed torque characteristics, low fuel consumption, compact internal dimensions, and wide applicability. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. The term 'engine' can refer to either the power generation device or the entire machine including the power unit.
120
Share

What is the fuel consumption of the fourth-generation Fit?

The comprehensive fuel consumption of the Fit is 5.2-5.6L/100km. There are currently 6 models of the Fit on sale. The comprehensive fuel consumption of the Trend Start version is 5.2L/100km. The Trend Enjoy version and Trend Run version have a comprehensive fuel consumption of 5.3L/100km. The Trend Max version, Trend version, and Trend Run Pro version have a comprehensive fuel consumption of 5.6L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.5-8.1L/100km. When driving, the following 5 tips can help reduce fuel consumption: When starting the vehicle, use a low gear, gently press the accelerator, and accelerate slowly. Avoid suddenly pressing the accelerator hard, as this will multiply fuel consumption. Light acceleration, light braking, and early braking: When driving, press the accelerator lightly, try to avoid sudden increases in engine speed, and prevent the car from shaking during driving, making the car more fuel-efficient. By estimating road conditions and adopting slow and uniform acceleration or braking, fuel economy can be increased by up to 20%. Maintain proper tire pressure: Keep the tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (equivalent to about 0.2 in the metric system relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or inspection of the vehicle: Regular oil changes can reduce carbon deposits (carbon deposits can cause poor ignition, sluggish acceleration, increased fuel consumption, and even cylinder misfires in severe cases); regularly check and replace the air filter when dirty, and clean or replace the fuel injectors, spark plugs, and throttle body according to mileage. Close the windows when driving. Driving with the windows open increases wind resistance. The greater the wind resistance, the greater the resistance the car encounters, requiring more power and thus increasing fuel consumption.
118
Share

Where is the Bluetooth switch located in the Toyota Prado?

The Bluetooth switch in the Toyota Prado is located on the central control screen. You can click the menu button on the central control screen and then select Bluetooth to turn it on or off. The Prado, also known as the Land Cruiser Prado, is a mid-to-large-sized SUV under the Toyota brand. As the latest model in the Toyota Land Cruiser series, the Prado boasts excellent power performance and meets the Euro III emission standards. The domestic version of the new Prado is equipped with a 3.5-liter naturally aspirated V6 engine. The engine code is 7GR-FKS, with a maximum power output of 206 kW and a maximum torque of 365 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4500 rpm. It features VVT-i technology and hybrid injection technology, with an aluminum alloy cylinder head and block. The engine is paired with a 6-speed manual transmission. The Prado's front suspension uses a double-wishbone independent suspension, while the rear suspension employs a four-link non-independent suspension. Additionally, the vehicle is equipped with a part-time 4WD system and features a body-on-frame design, giving it strong off-road capabilities.
112
Share

What are the medical examination items for driver's license renewal after expiration?

Driver's license renewal medical examination mainly includes vision test and color blindness test. In addition, there are several other items such as grip strength, squat and stand up, blood pressure, hearing, and electrocardiogram. When renewing the license, you also need to bring your own photos, which require three white background photos. Notes for driver's license renewal: If the driver's license is not renewed at the traffic police department one year after its expiration, or if drivers aged 60 or above fail to submit physical examination documents within one year after the end of a scoring cycle, the driver's license will be revoked. According to the driver's license usage regulations, drivers can apply for license renewal up to 90 days before the expiration of their driver's license. According to Article 49 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Order No. 111 of the Ministry of Public Security), motor vehicle drivers holding large passenger vehicles, tractors, city buses, or medium-sized passenger vehicles must undergo a physical examination every two years and submit a medical certificate issued by a county-level or military regiment-level medical institution within 15 days after the end of the scoring cycle.
107
Share

Where is the rear camera of the dash cam installed?

The rear camera of a dash cam is generally installed at the top left or top right corner of the license plate, and some are installed directly above the license plate. In practice, the installation position may vary slightly depending on the brand and the camera angle. The purpose of a dash cam is to protect the driver's legal rights and avoid extortion or blackmail; to help traffic police accurately and quickly handle traffic accidents; to reduce driver violations and lower the probability of traffic accidents; and to assist courts in making accurate judgments when handling traffic accident cases. Dual cameras cover both the front and rear views of the vehicle, providing comprehensive protection for the owner and driving safety. Installation method for the rear camera of a dash cam: Connect the rear camera plug and the power plug on the cigarette lighter, and confirm whether the front and rear cameras can work properly. If everything is correct, start routing the wires; Insert the wires into the plastic panel above, connect to the fuse box, and use a test pen to check before connecting; Use a scraper to guide the rear camera wire to the rear windshield and secure it properly; Remove the panel above the rear windshield, pull the wire through the hole, install the camera on the removed panel, and then reinstall the panel; After installing the camera, check its working status. Insert the plug into the display screen to see the rear recording. If it is not suitable, adjust the camera accordingly.
115
Share

What models does Dongfeng Nissan have?

Dongfeng Nissan brand models include: Sylphy, X-Trail, Qashqai, Teana, Tiida, Bluebird, Kicks, Murano, Livina, Sunny, Cima, Sylphy Zero Emission, March, Murano Hybrid, etc. Dongfeng Nissan Passenger Vehicle Company consists of Huadu Plant, Xiangfan Plant, Engine Branch, and R&D Center. The latest X-Trail model uses a 1.5T VC-Turbo engine with a maximum power of 204 horsepower and maximum torque of 300 N·m. The compression ratio can intelligently switch between 8:1 and 14:1, delivering strong power with low fuel consumption. The transmission part uses a CVT gearbox that can simulate 8-speed shifting, with a maximum torque capacity of 330 N·m. The suspension structure consists of front MacPherson and rear multi-link. The latest Teana model uses a variable compression turbocharged engine, a 2.5-liter four-cylinder with a maximum power of 188 horsepower and maximum torque of 180 N·m. The continuously variable automatic transmission (CVT) powers the front wheels of the car and comes with numerous advanced driving assistance systems, such as ProPilot Assist. The latest 14th-generation Nissan Sylphy maintains basically the same body dimensions as the old model, with length, width, and height of 4641/1815/1450 mm respectively, and a wheelbase of 2712 mm. In terms of power, the Sylphy is equipped with an HR16, a 1.6-liter naturally aspirated four-cylinder engine.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.