···
Log in / Register

What are the specific items for each car maintenance?

6Answers
GarrettFitz
07/29/2025, 05:26:50 AM

Regular car maintenance items mainly include replacing engine oil, oil filter, cabin air filter, engine air filter, fuel filter, transmission fluid, power steering fluid, brake fluid, coolant, spark plugs, battery, brake pads, brake rotors, tires, wiper blades, etc. Among these, replacing engine oil, oil filter, cabin air filter, and engine air filter are mandatory, while other components can be replaced based on their specific wear condition. Regular car maintenance intervals: 1. For 10,000-30,000 km, generally only engine oil and oil filter need to be replaced. 2. For 30,000-40,000 km, coolant replacement and throttle body cleaning are typically required. 3. For 40,000-60,000 km, spark plugs, brake fluid, and brake pads need replacement. 4. For 60,000-80,000 km, throttle body cleaning, transmission fluid replacement, and tire replacement are necessary. 5. For 80,000-100,000 km, timing belt replacement and checking for carbon deposits in the cylinders are recommended.

Was this review help?
120
Share
DelAubrey
08/12/2025, 05:55:22 AM

Every time I go for car maintenance, there are quite a few routine items. Oil change is the top priority. The engine runs every day, and dirty oil can cause severe wear. It needs to be replaced every 5,000 kilometers or so; otherwise, the engine's lifespan will be shortened. Next is replacing the oil filter and air filter, as they accumulate dust and affect air intake efficiency and fuel consumption. Tire inspection is essential—checking pressure and wear. If they're unbalanced, a wheel alignment or balancing is needed—safety first. The brake system must be checked every time; if the brake pads are thin or the fluid level is low, they should be replaced immediately to avoid failure in emergencies. Lights and the battery are also key inspection points—older cars are prone to battery drain or dim lights. Wiper blades and washer fluid must be sufficient; otherwise, visibility in the rain is poor. I usually add an undercarriage inspection to check for strange noises or leaks. After everything is done, the car runs smoothly, and I feel at ease.

Was this review help?
17
Share
Expand All
OliveAnn
10/06/2025, 01:45:40 AM

When maintaining my car, I always emphasize prioritizing basic items. Oil and filter changes are the core—deteriorated oil makes the engine groan, and a dirty filter increases dust intake and fuel consumption. Air and cabin filters also need regular replacement, especially during summer when the AC is used more frequently, ensuring fresh and non-stuffy air inside. Brake inspections are critical, checking pad thickness and fluid levels to guarantee no slippage during sudden stops. The tire section includes checking inflation pressure and cracks; I often ask the mechanic to also inspect belt tension and battery terminal corrosion—these small details can prevent future issues. Don’t overlook fluid top-ups, like coolant to prevent engine overheating and power steering fluid for smooth wheel rotation. A minor service like this every three months keeps the car running longer, saving me both worry and money.

Was this review help?
17
Share
Expand All
LaRose
11/19/2025, 02:13:12 AM

As a driver, there are a few essential maintenance items I must do during servicing: changing the oil and two filters—the oil filter and air filter—to keep the engine running clean. Checking tire pressure and wear to avoid blowouts on the road; ensuring lights are functional and replacing old wiper blades to guarantee nighttime driving safety. Also, inspecting brake pad thickness and fluid levels such as coolant and brake fluid—topping up immediately if low. Cleaning battery terminals to prevent corrosion. Although these items are basic, performing them during each maintenance session ensures the car remains stable and durable.

Was this review help?
5
Share
Expand All
DeEloise
01/09/2026, 09:01:54 PM

I focus on preventive maintenance in every detail. The core is oil and filter changes to prevent carbon buildup from damaging the engine; replacing the air filter helps save fuel; light checks ensure clear visibility. Tire maintenance includes checking pressure and rotation balance to extend lifespan. Pay close attention to the brake system—measure pad thickness and fluid boiling points accurately. Test the battery voltage and top up fluids like windshield washer promptly. Doing these regularly can reduce the risk of major repairs, extend the car's lifespan, and save costs.

Was this review help?
18
Share
Expand All
StMaverick
04/06/2026, 01:53:17 AM

During maintenance, I insist on a full coverage of items: oil change to lubricate the engine; replacement of air and cabin filters for fresh airflow; thorough brake inspection to ensure quick response; tire condition check to prevent handling errors; lights and wipers for clear visibility; battery performance to ensure smooth starting; belt and pulley tension to prevent breakage; fluids like coolant and brake fluid levels must be sufficient. Completing these safety items ensures worry-free driving every time.

Was this review help?
8
Share
Expand All
More Q&A

Are New Energy Vehicles Mandatorily Scrapped After 8 Years?

For new energy vehicles, the scrapping standards are entirely based on the existing standards for fuel-powered vehicles, with no separate scrapping criteria. As long as the vehicle passes the annual inspection, there is no issue, and it can continue to be used. Otherwise, it must be scrapped. More relevant information is as follows: 1. Passenger Cars: Under the new regulations for passenger car scrapping, the existing standard for private cars is a mileage of approximately 600,000 kilometers. When this mileage is reached, the state guides the vehicle to be scrapped. 2. Whole Vehicle: In terms of whole vehicle scrapping, new energy vehicles follow the same standard as fuel-powered vehicles, being scrapped at around 600,000 kilometers. 3. Battery: According to the battery recycling management measures, batteries are considered scrapped after about 5 to 8 years.
116
Share

What causes the noise from car window glass while driving?

Solutions for noise from car window glass while driving: 1. Loose door screws or lifting bracket, simply tighten the loose door glass. When driving on bumpy roads, the car window glass may make noise, which is usually caused by loose fastening screws inside the window glass or the lifting bracket. 2. Aging window glass sealing strip, replace it directly. Aging door glass sealing strips are often one of the reasons for window noise. If it's a new car making noise, simply purchase lubricant and apply it evenly on the sealing strip. 3. Debris in the window glass guide rail, the solution is to use tools to clean the debris in the guide rail. The gap in the sealing strip of the car slot can easily bring in dust and particles during the glass lifting process, which may cause vibration and noise from the window glass. If dust and particles accumulate more and more, it may damage the lifting motor.
104
Share

What does PVM panoramic monitoring system mean?

PVM panoramic monitoring is similar to a vehicle's all-around view system, which allows the driver to view the car's position from a top-down perspective. It helps the driver see a wider field of vision when driving at low speeds. The following precautions should be noted when using panoramic monitoring: 1. Do not rely entirely on the panoramic view monitoring system; always drive with caution. 2. Before using the panoramic view monitoring system, visually inspect the surroundings of the vehicle to form a general judgment. 3. When using the panoramic view monitoring system, do not just look at the screen; use the vehicle's rearview mirrors to observe the surroundings. 4. Avoid using the system under adverse conditions such as slopes, curves, or during rain or snow. 5. Changes in tire size may affect the accuracy of the panoramic monitoring guide lines.
102
Share

What does the red key symbol on the dashboard indicate?

When a red key symbol appears on the car dashboard, the possible reasons are as follows: 1. The smart key battery is dead, and the car cannot detect the smart key. 2. The smart key is not inside the vehicle or is too far from the sensing point to be detected. 3. There is interference in the surrounding environment, such as near high-voltage power lines, transformers, or mobile communication signal towers. The functions of the car smart key are as follows: 1. When the key approaches the car body, the doors automatically unlock, and the anti-theft alarm is deactivated, with the turn signals flashing twice. 2. When the key moves away from the car body, the doors automatically lock, and the anti-theft alarm is activated, with the turn signals flashing once and the horn sounding briefly. 3. The effective detection range for the main door is at least 1.5 meters, while other doors are effective when the key is near them.
110
Share

How to Choose a Car Windshield?

Car windshield selection is as follows: 1. Choose a reputable manufacturer: Car glass on the market is divided into original factory glass and aftermarket glass. The quality of aftermarket glass is not guaranteed. When purchasing, consumers should first choose a formal channel and a reputable manufacturer with 3C certification. Cheap and inferior glass can endanger driving safety. 2. Check the trademark: The logo on a qualified product is difficult to scrape off with a blade, while counterfeit products can be easily scraped off. Qualified glass has smooth edges when broken, whereas inferior glass is very sharp. Qualified car glass has a smooth surface without unevenness, and the logo on qualified car glass is hard to scrape off. 3. Examine the glass fragments: High-quality glass fragments placed on the ground cannot be crushed by stepping on them, while inferior glass can be easily crushed by stepping on it, causing significant harm to individuals. Unqualified car glass is more likely to be fatal upon impact.
118
Share

Why is the steering wheel not straight when driving in a straight line?

There are several reasons why the steering wheel is not straight when driving in a straight line: 1. The steering wheel is misaligned. When you let go of the steering wheel while driving, the car does not deviate, indicating a simple misalignment of the steering wheel due to relative rotational displacement between the steering wheel and the steering column. 2. The car deviates when you let go of the steering wheel, which is a case of car deviation. In this scenario, a four-wheel alignment and dynamic balance check are necessary. 3. A malfunction in the steering gear. 4. Deformation of the vehicle's lower stabilizer bar. A misaligned steering wheel means that the car requires the steering wheel to be turned at a certain angle to maintain straight-line driving. If the steering wheel is placed in a horizontal position, the car cannot drive straight, and the steering wheel cannot automatically return to its original position after turning.
112
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.