···
Log in / Register

What are the serious quality issues with the Roewe RX5 MAX?

6Answers
VanMary
08/29/2025, 10:04:39 PM

The typical faults of the vehicle mainly include engine shaking, gearbox jerking, infotainment system malfunctions, water ingress in headlights, and in-car connectivity system issues. These are all minor problems that are not significant, indicating that the product quality of the Roewe RX5 MAX is relatively reliable. Claims of serious quality issues are not accurate. Introduction to the RX5: The Roewe RX5 is an internet-connected SUV, featuring Porsche-tuned chassis, GKN intelligent all-wheel-drive system shared with Land Rover, fully independent suspension system, and a four-way high-speed CANBUS system bus, all of which enhance the driving and riding experience. RX5 powertrain: The Roewe RX5 is equipped with a 1.5T turbocharged engine, paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission, delivering a maximum power of 124kW (169PS) and a peak torque of 250N·m, consistent with the power parameters of the current model.

Was this review help?
115
Share
LuciaDella
09/11/2025, 02:17:16 AM

I've been driving the Roewe RX5 Max and have encountered quite a few headaches, especially with the underperforming powertrain. The engine always makes a 'clattering' noise at high speeds, as if internal parts are loose. Acceleration is jerky, and gear shifts feel as rough as towing a trailer. The electronic system is another pain—the touchscreen freezes frequently, the navigation signal drops quickly, and Bluetooth keeps disconnecting, making it unusable while driving. The interior quality is subpar too; the seat leather cracked and peeled within a year, and the doors still creak even when shut tightly. The brakes feel spongy, always lagging in emergency stops, which feels unsafe. These issues persist even after frequent repairs, and replacement parts are hard to come by from after-sales service.

Was this review help?
2
Share
Expand All
DeDonovan
10/25/2025, 03:08:34 AM

Many owners have pointed out that the Achilles' heel of the Roewe RX5 Max lies in its fragile electronic modules. The infotainment system screen frequently goes black or reboots, while sensor false alarms trigger fault codes, causing unnecessary panic. Engine oil leakage is no trivial matter—poor sealing rings also lead to noticeable vibrations. The transmission logic is flawed, resulting in strong jerks during low-speed traffic jams, making it feel like a dance party. Large gaps in the body structure amplify wind noise at high speeds, disrupting concentration. Premature tire wear and unstable grip during turns heighten risks. Slow after-sales responses and prolonged repair cycles drain both time and money, undermining daily convenience.

Was this review help?
10
Share
Expand All
MadelynLynn
12/08/2025, 02:32:25 AM

The Roewe RX5 Max looks flashy but is actually frustrating. The multimedia system keeps crashing, the navigation drifts, and the music keeps cutting out, which is extremely annoying. The cabin is noisy, and there's a constant thumping sound from the trunk. The brakes feel weak with delayed feedback. The engine acceleration is sluggish, and fuel consumption has skyrocketed. Friends with the same car report similar common issues, so be sure to research thoroughly before buying.

Was this review help?
12
Share
Expand All
DelVincent
01/28/2026, 03:41:42 AM

From a safety perspective, the serious issues with the Roewe RX5 Max are truly concerning. The steering system occasionally fails to return to center properly, making high-speed lane changes highly dangerous. The brakes feel spongy, making emergency stops difficult and increasing the risk of accidents. The electronic stability control function may trigger falsely or fail to engage, posing a significant risk of skidding on slippery roads. The body structure lacks sufficient strength, resulting in low side-impact crash test scores. Rapid tire wear leads to unstable grip, causing loss of control during short braking in rainy conditions. These hidden dangers could lead to major accidents, necessitating regular professional inspections to prevent potential hazards.

Was this review help?
5
Share
Expand All
JessicaDella
04/24/2026, 01:28:31 AM

The overall quality of the Roewe RX5 Max has significant shortcomings. Engine oil leaks and unstable power are frequent issues, while the transmission's jerky gear shifts feel like it's getting stuck. The interior materials are poor, with seats cracking quickly, and loose door panels causing annoying rattles. The electronic system is frustrating with black screens and failed navigation. There's constant noise from the steering and suspension, and the slow brake response poses safety risks. After-sales service is inadequate, with parts shortages prolonging repair times. Its long-term reliability is poor, so prioritize brand reputation and test drive experiences to avoid pitfalls when choosing a car.

Was this review help?
8
Share
Expand All
More Q&A

What is the ignition method of a diesel engine?

Compression ignition is an ignition method for diesel engines. Diesel engines use diesel as fuel. Compared to gasoline, diesel has a lower auto-ignition temperature (around 220°C), higher viscosity, and is less prone to evaporation. Additionally, diesel engines do not have spark plugs, and their compression ratio is higher than that of gasoline engines. Therefore, diesel engines rely on the compression stroke to compress the air-fuel mixture to the ignition point, causing it to auto-ignite. Hence, this ignition method is called compression ignition. The working principle of diesel engine ignition: The diesel engine compresses the air to generate high heat, and when atomized diesel is injected, it explodes and expands. The pressure simultaneously acts on the piston, driving it to perform non-uniform rapid linear motion along the cylinder. Through the crank-connecting rod mechanism composed of the cylinder liner, crankshaft, and rotating shaft, the linear motion of the piston is converted into the rotational motion of the gear, thereby outputting mechanical energy. The design principle of a diesel engine relies on compression ignition: The operation of a diesel engine is completed through four processes: intake, compression, combustion expansion, and exhaust. These four processes constitute one working cycle. An engine that completes one working cycle through four piston strokes is called a four-stroke diesel engine.
112
Share

How to open the fuel tank cap of Haval H2?

The fuel tank cap switch of Haval H2 is located on the left side of the driver's seat inside the car. It is operated by an interior lever, which is more convenient compared to the mechanical key method. This design has been widely adopted in fuel vehicles for a long time, but it may also lead to refueling without turning off the engine, so owners need to pay extra attention. The Haval H2 is a compact SUV from Great Wall Motors, featuring a MacPherson strut front suspension and a multi-link rear suspension. Its body dimensions are 4365mm in length, 1814mm in width, and 1710mm in height, with a wheelbase of 2560mm. In terms of power, the Haval H2 is equipped with a 1.5T turbocharged engine paired with a 6-speed manual transmission.
101
Share

How long should a bumper dry after painting?

Generally, it takes about one hour for the rear bumper to dry after painting. Quick spray painting can save time. The process and time for bumper touch-up painting: 1. Tools needed: water sandpaper, sponge, filler putty, scraper, spray paint, universal tape; 2. Inspection process: When you notice bumper damage, first get out of the car to check the specific location and then make a repair plan. 3. Cleaning step: Cleaning the damaged area prepares it for the next operation. Use neutral cleaning agents to ensure impurity-free repair; 4. Sanding process: Use 320-grit water sandpaper for the first sanding, continuing until the damaged area is smooth. 5. Second cleaning: This cleaning is to remove impurities from the sanding process, preparing for the next step; 6. Filler putty application: Apply the filler evenly within the sanded area. It shouldn't be too thick but can extend slightly beyond the damaged area. This step helps level the depression. Then wait for over two hours for the putty to dry.
105
Share

What is the function of the line on the rearview mirror?

This line on the rearview mirror is called a dual-curvature mirror. The glass on either side of the line has different curvatures: the larger inner portion has a smaller curvature and a narrower field of view, while the smaller outer portion has a greater curvature and a wider imaging range. Below are the functions of the rearview mirror line: 1. The outer section with a larger curvature is designed to reduce the driver's blind spot, effectively acting like a small convex mirror attached to the rearview mirror. 2. The two sides of this dotted line represent two different mirror surfaces with distinct curvatures. The line serves as a divider between these two curvatures. Positioned at the outer one-third of the mirror, the larger inner portion is a standard flat mirror that does not distort reflected objects, allowing the driver to clearly see conditions farther along the side of the vehicle.
114
Share

What is the repair method for sidewall tire scratches?

Tire sidewall scratches cannot be repaired. The rubber on the sidewall of a tire is relatively thin, and repairing the tire requires grinding away some of the rubber, making it even thinner and more prone to blowouts, which can endanger driving safety. The functions of tires are: 1. Supporting the entire weight of the vehicle and bearing the load of the car; 2. Transmitting traction and braking torque, ensuring the adhesion between the wheels and the road surface. Tire maintenance methods include: 1. Regularly cleaning stones from the tire treads; 2. Reducing exposure to sunlight; 3. Frequently checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Being mindful of driving habits, choosing smooth roads to drive on, avoiding objects that can puncture or scratch tires, and steering clear of chemical spills that can corrode tires.
102
Share

What is a P and a triangle on a car?

A P and a triangle on a car refer to the parking sensor, also known as the reverse collision avoidance radar or parking assist device. It mainly consists of ultrasonic sensors, a controller, and a display. The primary function of the ultrasonic sensors is to emit and receive ultrasonic signals, which are then input into the main unit and displayed on the display device. The controller processes these signals to calculate the distance and direction between the vehicle and obstacles. When the sensors detect that the car is approaching an obstacle at a dangerous distance, the system alerts the driver through the display. The parking assist system is an important application of the car's active collision avoidance system in low-speed and complex urban environments, and it also represents the intelligent aspect of the car's active collision avoidance system.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.