···
Log in / Register

What are the serious defects of the BYD S6?

1Answers
Jesse
07/24/2025, 08:18:40 AM

BYD S6 has the following serious defects: 1. Noticeable noise: When the vehicle is idling, especially when cold, the noise inside the cabin is quite noticeable. To ensure the engine oil is fully and evenly distributed for protection during operation (idling stabilizes at 800 rpm, with instantaneous fuel consumption around 1.4), it takes more than three minutes to warm up the car, which is somewhat lengthy. 2. Overly hard brake discs: The excessive hardness of the brake discs leads to abnormal braking noises. 3. Abnormal noises from certain parts at high RPMs: Some components are not securely connected. 4. Key detection failure: While driving, issues such as the horn not working and turn signals not lighting up may suddenly occur. 5. Limited driver's space: The foot space is cramped, and releasing the clutch quickly can easily cause the left knee to hit the surrounding area.

Was this review help?
113
Share
More Q&A

What is the 0-100 km/h acceleration time of the Tharu?

According to official data, the Tharu comes in two models: 1.4L and 2.0L. The 1.4L model has a 0-100 km/h acceleration time of 9.1 seconds, while the 2.0L model achieves it in 7.8 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents the strength of the engine. The greater the torque, the stronger the force pushing the vehicle, resulting in faster acceleration. The 1.4L Tharu has a maximum torque of 250 Nm and a 0-100 km/h acceleration time of 9.1 seconds. The 2.0L Tharu has a maximum torque of 320 Nm and accelerates from 0-100 km/h in 7.8 seconds. Transmission efficiency: The transmission acts as a medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Tharu is equipped with a 7-speed dual-clutch transmission across all models. Specifically, the 1.4L version uses a dry dual-clutch transmission, while the 2.0L version employs a wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The 1.4L Tharu has a power-to-weight ratio of 103 Hp/T and a 0-100 km/h acceleration time of 9.1 seconds. The 2.0L Tharu has a power-to-weight ratio of 116 Hp/T and accelerates from 0-100 km/h in 7.8 seconds.
111
Share

Does the Passat have a sunglasses holder??

The Passat model comes with a sunglasses holder located around the overhead reading light. Powertrain: The Passat is equipped with three engine options: a 1.4-liter turbocharged engine, a low-power 2.0-liter turbocharged engine, and a high-power 2.0-liter turbocharged engine. The 330TSI model features the low-power 2.0-liter turbocharged engine. Low-power 2.0-liter turbocharged engine: Maximum power output is 137 kW, maximum torque is 320 Nm, with maximum power achieved between 4,100 to 6,000 rpm and maximum torque between 1,500 to 4,000 rpm. This engine utilizes combined injection technology and features an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission. High-power 2.0-liter turbocharged engine: Maximum power output is 162 kW, maximum torque is 350 Nm, with maximum power achieved between 4,500 to 6,200 rpm and maximum torque between 1,500 to 4,400 rpm. This engine employs direct fuel injection technology and features an aluminum cylinder head with a cast iron cylinder block. It is paired with a 7-speed dual-clutch transmission. Suspension: The Passat uses a MacPherson strut front suspension and a multi-link independent rear suspension.
110
Share

What are the wheel hub specifications for the Audi A7?

The bolt pattern for the Audi A7 wheel hub is 5x112. The professional term for the wheel hub bolt pattern is Pitch Circle Diameter (PCD), which refers to the diameter of the circle formed by the center of the lug bolts. The Audi A7 wheel hub has 5 lug bolts, and the distance between them is 5x112, indicating that the PCD of this wheel hub is 112mm with 5 lug bolt holes. Wheel Hub Bolt Pattern: The professional term for the wheel hub bolt pattern is Pitch Circle Diameter (PCD), which refers to the diameter of the circle formed by the center of the lug bolts. Most wheel hubs typically have either 5 or 4 lug bolts, with varying distances between them. Hence, terms like 4x103, 5x114.3, and 5x112 are used. For example, 5x114.3 means the PCD of the wheel hub is 114.3mm with 5 lug bolt holes. Check the tire wear condition: This includes checking whether the tires have worn down to the wear indicators normally or if there is uneven wear. For tires with severe abnormal wear, the cause should be identified promptly, and the tires should be replaced. Check for debris between the treads: If any debris is found, it is best to remove it. Otherwise, these embedded objects can cause damage to the tires if left in the treads for an extended period.
119
Share

What are the consequences of not replacing BMW spark plugs?

Failure to replace BMW spark plugs can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, decreased power, and most importantly, difficulty in ignition, affecting the normal use of the vehicle. Spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type. It is advisable to follow the user manual. The following standards can be referenced for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, remove the high-voltage distributor wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the high-voltage distributor wires in the ignition order and secure the cover.
106
Share

How to Tell If the Ignition Coil Is Bad?

Methods to determine if the ignition coil is faulty: 1. At idle, the car body shakes noticeably. Observe the exhaust pipe outlet—the exhaust gas flow shows obvious intermittency, and the pipe vibrates severely, accompanied by a clear sputtering sound. 2. While driving, when the RPM is below 2500, the car body shakes significantly with poor acceleration, but the shaking disappears once the RPM exceeds 2500. 3. Open the engine hood and observe the running engine—if it exhibits pronounced shaking that clearly deviates from normal operation, with a large vibration amplitude.
105
Share

Where is the air conditioning filter of Volkswagen cars located?

Volkswagen car's air conditioning filter is located behind the glove box on the passenger side. You can see the air conditioning filter after removing the glove box. Here are some introductions about the air conditioning filter: 1. When purchasing an air conditioning filter, you can choose one that can filter PM2.5 particles, which can make the air inside the car cleaner and is beneficial to the health of the occupants. 2. Regularly clean and disinfect the air conditioning system. If the air conditioning system is not cleaned for a long time, it can become very dirty and breed a lot of bacteria, which may affect people's respiratory system.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.