···
Log in / Register

What are the reasons for the electronic parking brake warning light to illuminate?

1Answers
OAaliyah
07/24/2025, 07:43:27 AM

Electronic parking brake warning light illuminates due to: 1. Insufficient brake fluid pressure; 2. Air in the brake system; 3. Excessive free travel of the brake pedal or excessive brake clearance; 4. Wear or damage to the brake master cylinder, wheel cylinder piston, wheel cylinder pipe, or aging/damage of the rubber cup. The parking brake fault light (indicated by a slash) signifies a malfunction in the parking brake. Drive cautiously and have it inspected at a repair shop as soon as possible. To use the parking brake: With your right hand, bring the four fingers together, position the thumb forward, pull the lever upward firmly to tighten it, and the brake indicator light on the dashboard will illuminate simultaneously.

Was this review help?
117
Share
More Q&A

What Are the Reasons Why the Car Lights Stay On and Cannot Be Turned Off?

There are several reasons why car lights stay on and cannot be turned off, including a faulty headlight switch, broken or short-circuited wiring, incorrect rain/light sensor signals, or a damaged relay. Faulty Headlight Switch: If the headlight switch itself is damaged, it may cause signal disruption. In this case, the headlight switch needs to be replaced. Broken or Short-Circuited Wiring: If the headlight switch circuit is broken or short-circuited, it can lead to signal disruption. In this situation, the vehicle should be taken to a 4S shop or auto repair shop for repairs. Incorrect Rain/Light Sensor Signals: If the rain/light sensor on the windshield sends incorrect signals, the system may mistakenly assume the vehicle is in a dark environment, causing the headlights to remain on. The cause of the signal error should be checked and adjusted accordingly. Damaged Relay: If the headlight relay or the main lighting control unit is damaged or improperly programmed, the car lights may stay on and cannot be turned off. In this case, the vehicle should be taken to a 4S shop for inspection and repair.
104
Share

Can the snow on the car be left to melt on its own without cleaning?

When a car is covered with snow, it should not be left to melt automatically but should be cleaned immediately. Snow contains a large amount of corrosive substances such as acids, alkalis, or salts, especially in areas with poor air quality. If not removed promptly, these substances can corrode the car's paint, causing the body's glaze to lose its luster. If the snow accumulation is only a thin layer, you can start the car first and wait for the water temperature to rise to 90 degrees before turning on the heater. As the temperature rises, the snow on the car windows will gradually melt. Meanwhile, use a cloth to clean the snow on other parts of the car. If the snow covering the car is relatively thick, a snow shovel can be used to remove it. After the car is covered with snow, if the windshield wipers are frozen, do not force them to operate. Instead, turn on the heater inside the car and wait for the water temperature to rise and the snow to melt before using the wipers. When cleaning snow from the car, do not neglect the wheels and rims. The wheels are most prone to freezing, which can accelerate rubber aging and even cause deformation. If the brake discs and calipers in the rims freeze, the braking performance will be significantly worse.
107
Share

What are the differences between the Audi A3 and the Golf?

The differences between the Audi A3 and the Golf are: 1. Different engine configurations: The Audi A3 is equipped with a 2.0T turbocharged engine; the Golf has a 1.2T turbocharged engine. 2. Different body dimensions: The Audi A3 measures 4312mm in length, 1785mm in width, and 1426mm in height; the Golf measures 4259mm in length, 1799mm in width, and 1452mm in height. 3. Different tire specifications: The Audi A3 has tire specifications of 225/45R17; the Golf has tire specifications of 205/55R16. 4. Different suspension systems: The Audi A3 features a multi-link independent suspension; the Golf uses a torsion beam non-independent suspension.
117
Share

What are the differences between Honda Avancier 240 and 370?

The differences between Honda Avancier 240 and 370 are: 1. Different transmissions: Honda Avancier 240 uses a CVT transmission; Honda Avancier 370 uses a 9-speed automatic manual transmission. 2. Different horsepower: Honda Avancier 240 has a maximum horsepower of 193ps; Honda Avancier 370 has a maximum horsepower of 272ps. 3. Different power: Honda Avancier 240 has a maximum power of 142kw; Honda Avancier 370 has a maximum power of 200kw. 4. Different torque: Honda Avancier 240 has a maximum torque of 243nm; Honda Avancier 370 has a maximum torque of 370nm.
114
Share

Can Temporary License Plates Be Used in Other Regions?

With a 30-day temporary license plate, you can drive in other regions. A 15-day temporary license plate is only valid for driving within the city, while a 30-day temporary license plate allows driving outside the local area. Below are the validity periods for temporary vehicle license plates: 1. Temporary driving within the jurisdiction (local city): Each issuance is valid for no more than 15 days; 2. Temporary driving across jurisdictions (outside the local city): Each issuance is valid for no more than 30 days; 3. Temporary driving for research, prototype testing, and non-standard special vehicles: Valid for no more than 90 days; 4. For vehicles obtained through purchase, allocation, or gifting that have not yet been registered, the issuance of temporary license plates shall not exceed three times.
109
Share

How to Reset the Suzuki Maintenance Wrench Light?

Here is the method to cancel the Suzuki maintenance wrench light: 1. First, adjust the display to show the remaining maintenance mileage. 2. There is a round button at the top of the turn signal lever. Press this button five times consecutively within 3 seconds to reset the wrench. Additional related information is as follows: 1. The body dimensions are length × width × height: 5168/1980/1928mm, with a wheelbase of 3198mm. 2. There are two powertrain options. One is equipped with a 1.9T inline 4-cylinder turbocharged engine, paired with either a 6-speed manual or 6-speed automatic transmission, delivering a maximum power of 110KW and a maximum torque of 350N・m. The other option is a 2.0T inline 4-cylinder turbocharged engine, also paired with either a 6-speed manual or 6-speed automatic transmission, delivering a maximum power of 165KW and a maximum torque of 350N・m.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.