Steps to turn off a keyless ignition car: 1. Press the brake pedal and bring the vehicle to a complete stop. 2. Shift the gear from D (Drive) to N (Neutral). 3. Engage the handbrake (for electronic handbrakes, simply pull it upward). 4. Release the foot brake but do not turn off the power (this ensures the car is fully stabilized by the handbrake, preventing P-gear lock-up). 5. Continue pressing the foot brake and shift the gear from N to P (Park). 6. Release the foot brake, press the start/stop button to turn off the power, completing the parking process. Precautions for keyless ignition system cars: 1. Avoid placing the smart key near electronic devices. Since smart keys use low-intensity radio waves, they may malfunction under magnetic interference. Keeping the smart key close to a phone can cause interference from the phone's frequency, leading to failure. Exposure to high-intensity radio waves may also drain the battery excessively. Therefore, avoid placing the smart key near TVs, computers, etc. 2. Avoid rough handling. Smart keys are highly sensitive to drops from heights, as their internal circuits have weak impact resistance and can be easily damaged by severe collisions. 3. If the smart key gets wet, the internal circuits may short-circuit and malfunction. In case of water exposure, open the casing, lay it flat, and dry it with a hairdryer before taking it to a repair shop for inspection. Do not shake the key vigorously, as this may spread water to other critical circuits. Also, avoid using the remote immediately, as it could burn out the circuit board. 4. Do not expose the smart key to direct high-temperature environments, such as on the dashboard or engine hood.
