···
Log in / Register

What are the reasons for the BYD S6 air conditioner not cooling?

6Answers
PeterDella
08/31/2025, 12:41:37 AM

The reasons for the BYD S6 air conditioner not cooling include excessive refrigerant, insufficient refrigerant, excessive impurities in the refrigerant and frozen engine oil, and minor blockages. Excessive refrigerant: If the refrigerant in the air conditioning pipeline exceeds the standard, the system pipeline pressure will rise accordingly, which in turn will cause poor heat dissipation in the system, making the air conditioning not cooling phenomenon more severe. In this case, the excess refrigerant must be removed. Insufficient refrigerant: A slight leakage of refrigerant in the system leads to insufficient refrigerant, which will inevitably reduce the amount of refrigerant sprayed into the evaporator from the expansion valve. When the refrigerant evaporates during the evaporation period, the absorbed heat will also decrease accordingly, leading to a reduction in cooling capacity. In this case, refrigerant needs to be added. Excessive impurities in the refrigerant and frozen engine oil, and minor blockages: In the entire air conditioning system, if there are too many impurities in the refrigerant and frozen engine oil, the filter screen of the filter will inevitably become clogged, affecting the cooling passage capacity, increasing resistance, and possibly reducing the refrigerant in the expansion valve proportionally, thus affecting the insufficient cooling capacity. In this case, it is necessary to go to a repair shop to find a professional to clean the blockages.

Was this review help?
110
Share
LeSienna
09/12/2025, 04:00:39 AM

A few days ago, the air conditioning in my BYD S6 wasn't cooling properly. As an experienced driver with over a decade behind the wheel, I figured there could be a few common reasons. First, refrigerant leakage or insufficient levels—after several years of use, the pipes can age and start leaking Freon. Second, compressor failure—if you don't hear the usual humming noise, it's likely broken. Another possibility is clogging in the condenser or evaporator, where accumulated dust affects heat dissipation. Lastly, electrical component issues like blown fuses or short-circuited relays could be the culprit. For troubleshooting, start with the easiest steps: pop the hood to check if the compressor is running, and feel the temperature difference between the high and low-pressure pipes. If the air filter is dirty, replacing it is a quick fix. If DIY efforts don’t resolve it, head to the 4S shop promptly—prolonged AC issues can affect other electrical circuits, and road safety comes first. Regular system cleaning during maintenance can help prevent such problems.

Was this review help?
2
Share
Expand All
VanHeidi
10/26/2025, 10:01:55 PM

I've been using my BYD S6 for several years, and recently the AC suddenly started blowing hot air instead of cooling, which is really frustrating. Upon inspection, I found a blown fuse, but replacing it didn't fix the issue. Later, I suspected low refrigerant levels, so I bought some tools and topped it up, which helped a bit but didn't last long. Online research suggests it could be a loose compressor belt or a faulty clutch; others say there might be a refrigerant leak in the AC system due to cracks in the pipes. I tried rinsing the condenser with water myself, but professionals advise against tampering to avoid making it worse. This kind of problem requires step-by-step troubleshooting—start with simple checks like seeing if the filter is clogged and affecting airflow. If all else fails, take it to a repair shop; they have pressure gauges to diagnose accurately. Regular ventilation while driving and periodic AC maintenance can help reduce such issues.

Was this review help?
6
Share
Expand All
HoldenMarie
12/09/2025, 09:17:20 PM

When the BYD S6's air conditioning isn't cooling, I believe the compressor is the key issue. If it's not running, the problem might be in the electrical components, such as a blown fuse, damaged relay, or aging wiring. If the compressor is running but not cooling, it could be due to refrigerant leakage, insufficient pressure, or even a dirty condenser affecting heat dissipation, or a frozen evaporator blocking the cold air. A simple test: start the car and turn on the AC to listen for the compressor sound—no sound means checking the fuse box; sound but no cold air might indicate a refrigerant leak. Regular cleaning of filters and system components can prevent these issues—don’t wait until summer to address them.

Was this review help?
3
Share
Expand All
LaylaDella
01/29/2026, 10:28:34 PM

As a car enthusiast, my BYD S6's air conditioning once stopped working in summer. After careful troubleshooting, here are the possible causes: insufficient refrigerant is most common, especially in older cars prone to leaks; compressor or clutch failure also frequently occurs; system blockages like a dirty condenser affect efficiency; abnormal electronic sensors can cause unstable control. From my experience, first check if the filter is dirty and affecting airflow, then see if the compressor is running. Without diagnostic tools, it's safer to go to a professional shop for inspection. Regularly using recirculation mode helps maintain AC cleanliness. Don't add refrigerant yourself as improper operation may damage the system.

Was this review help?
19
Share
Expand All
JackMarie
04/24/2026, 04:40:22 PM

Our family has been driving the BYD S6 for many years, and the sudden failure of the air conditioning has made the kids very uncomfortable. Common issues include refrigerant leaks, compressor damage, or condenser blockages. I remember during one check-up, we found a blown fuse, and after replacing it, the situation improved a bit, but the compressor was making unusual noises. Later, we discovered that the system had insufficient pressure, possibly due to aging seals leaking Freon. Electronic components like relays or temperature sensors might also malfunction. My advice is to start with the basics: pop the hood to observe the compressor's operation; clean the pipes during regular maintenance; and when issues arise, don’t panic—take it to a repair shop to avoid damaging the car. Safe driving comes first, and timely handling of air conditioning problems ensures comfortable travel.

Was this review help?
4
Share
Expand All
More Q&A

What are the hazards of fire-damaged vehicles?

It can cause premature damage to the vehicle's oxygen sensor, leading to adverse consequences such as increased carbon deposits in the combustion chamber, unstable idle speed, weak acceleration, increased fuel consumption, and excessive exhaust emissions. In severe cases, insufficient engine lubrication can cause irreparable damage or even complete engine failure, significantly increasing repair costs and posing potential safety hazards. Below are the relevant details: 1. Concept: A fire-damaged vehicle refers to one that has been exposed to high temperatures, causing the plastic insulation layers of various wiring to age, which can easily lead to short circuits. Minor issues may include blown fuses and damaged electronic control components, while severe cases may result in spontaneous combustion. 2. Safety hazards: After a vehicle has been exposed to fire, the visible damage to plastic components is not the main issue, as they can be replaced. The real danger lies in the changes to the vehicle's structural strength. In steel heat treatment processes, there is a method called "annealing," which reduces the hardness of the steel to facilitate further processing. A vehicle exposed to fire essentially undergoes an "annealing" process on its frame, reducing its strength. Therefore, fire-damaged vehicles, like accident-damaged vehicles, should never be purchased.
101
Share

What to Do When There's a Scratch on the Side of a Car Tire?

Tire sidewall scratched with a small opening. First, visually assess the size of the mark. If it occurs during high-speed driving, safely pull over immediately, turn on hazard lights, and replace with a spare tire if the damage size is uncertain. If you can see a scratch on the tire sidewall with the naked eye, one thing is certain: the scratch can no longer be considered superficial and may even compromise the tire's structure. Therefore, you can first feel the scratch with your hand. Touching it can reveal a lot, including how the scratch was caused—whether by a sharp object or some blunt object. Below are related explanations: 1. Blunt object scratch: Scratches from blunt objects present an uneven surface, and you can feel debris like small stones inside the scratch. 2. Sharp object damage: If caused by a sharp object, it was likely from some sharp roadside debris while driving. This type of damage usually has a small cross-section but cuts deep, potentially damaging the radial structure inside the tire. Although the tire may not burst immediately, it should definitely not be used for long. It is recommended to replace it as soon as possible.
111
Share

What is the voltage of a pure electric vehicle?

Electric vehicles generally operate at 336V or 384V, while electric buses typically use 580-600V. The higher the busbar voltage, the wider the constant power speed range of the motor. Below is relevant information about electric vehicles: 1. Concept: A pure electric vehicle refers to a vehicle that uses onboard power sources as its energy, employs motors to drive the wheels, and meets all road traffic and safety regulations. It is entirely powered by rechargeable batteries. Although it has a 134-year history, its application has been limited to specific areas with a relatively small market. The main reason is that various types of batteries generally suffer from serious drawbacks such as high cost, short lifespan, large size and weight, and long charging times. 2. Advantages: Pure electric vehicles eliminate the need for fuel tanks, engines, transmissions, cooling systems, and exhaust systems. Compared to the internal combustion gasoline engine power systems of traditional vehicles, the cost of motors and controllers is lower, and pure electric vehicles have higher energy conversion efficiency. Since the energy source for electric vehicles—electricity—comes from large-scale power generation units, their efficiency is unmatched by small gasoline engines or even hybrid engines. The operating costs of pure electric vehicles are decreasing.
117
Share

How many kilowatt-hours does it take to fully charge an electric vehicle?

Generally, a 48V-20AH battery requires about 1.08 kilowatt-hours (kWh) to charge from a fully discharged state. Below is some related knowledge about electric vehicle charging: 1. Charging knowledge: The amount of electricity charged into an electric vehicle battery is usually 1.05 times the discharged capacity. The power consumption can be calculated based on the charging voltage: Power consumption = Charging voltage * Battery rated capacity * 1.05. The calculation process is as follows: Required charging amount = 20 * 1.05 = 21AH. Power consumption = 21 * 51.6 (average charging voltage) = 1083.6WH. Since 1 kWh = 1000WH, a full charge requires approximately 1.08 kWh. The charging time is 8-10 hours, meaning the hourly power consumption during charging is about 0.1-0.14 kWh. 2. Electric vehicles do not require frequent charging: Frequent charging can lead the battery to enter a failure period prematurely. However, regular use and charging are still necessary, but it is not required to charge the vehicle every time after riding.
114
Share

How to display fuel consumption on the new Fiesta 1.3?

Fuel consumption can be displayed on the trip computer screen located in the middle of the instrument panel. You can switch to the fuel consumption display by pressing the button on the right-hand stalk of the steering wheel. Below is some related information about fuel consumption display: 1. Introduction: Fuel consumption display refers to the function where the vehicle's computer automatically calculates instantaneous or average fuel consumption per 100 kilometers based on fuel consumption data transmitted by sensors. 2. Switching fuel consumption display on the instrument panel: Generally, there is a button or knob labeled "mode" on the multi-function steering wheel, which allows you to toggle between different display contents on the instrument panel. Some models also display comprehensive fuel consumption on the central control screen. The trip computer monitors the gasoline injected by the engine's fuel injectors, records the instantaneous fuel consumption at every moment, and then calculates the total fuel consumption and driving distance. The total fuel consumption in liters is divided by the distance in kilometers to obtain the fuel consumption per 100 kilometers. Generally, the fuel consumption per 100 kilometers for family cars is around 6L to 8L, while for SUVs it is around 8L to 10L, but there is always some margin of error in the fuel consumption per 100 kilometers.
101
Share

What does TCS mean when displayed in the car?

TCS stands for Traction Control System, also known as the Anti-Slip Regulation system. When braking on slippery roads, wheels may skid, even causing loss of directional control. During vehicle start-up or rapid acceleration, drive wheels may also skid, posing dangers like loss of control on icy or slippery surfaces. TCS is designed to address these issues. Here's an introduction to the automotive TCS: 1. Function: A vehicle's traction control can reduce engine power by decreasing throttle opening or through brake control and wheel slip prevention. Cars equipped with ASR (Anti-Slip Regulation) combine these two methods, known as ABS/ASR. 2. Principle: During turns, if drive wheels skid, it may cause the entire vehicle to veer to one side. With ASR, the vehicle maintains correct steering trajectory. In ASR-equipped vehicles, the mechanical linkage between the accelerator pedal and the throttle (or diesel injection pump lever) is replaced by electronic throttle control. Compared to other traction control systems, ESP (Electronic Stability Program) not only controls drive wheels but also non-drive wheels. For instance, in rear-wheel-drive vehicles prone to oversteer (where rear wheels lose control causing fishtailing), ESP stabilizes the car by braking the outer front wheel. During understeer, ESP corrects the trajectory by braking the inner rear wheel to adjust the driving direction.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.