What are the reasons for a car starter not working?

What are the reasons for the radiator fan of Wuling Hongguang not working?

The reasons for the car's radiator fan not working include the water temperature not reaching the required level or a relay failure. The specific details are as follows: Water temperature not reaching the required level: Most car radiator fans nowadays operate using electronic temperature control. Therefore, the fan will only start working normally when the internal water temperature of the car reaches the required temperature. If the temperature is too low, the radiator fan will not operate. Thus, if the car's radiator fan is not working, the first thing to check is whether the water temperature has reached the required level. Relay failure: If the water temperature meets the requirements but the car's radiator fan still does not work, the issue might be with the fan's relay. If the relay is faulty, the car's radiator fan will not function. Temperature control switch problem: If neither of the above issues is present, then the temperature control switch should be checked. Sometimes, faults can occur in this component, which can also affect the operation of the car's radiator fan. Therefore, it is important to inspect this as well.

15

5

Share

Which cars are Ora pure electric vehicles?

As of now, Ora has developed three pure electric vehicle products based on the ME pure electric platform: Ora iQ, R1, and R2. Ora pure electric vehicles refer to a newly established electric vehicle brand under Great Wall Motors, powered by onboard power sources and driven by electric motors to propel the wheels, meeting the requirements of road traffic and safety regulations. Moreover, it adopts a brand-new pure electric platform rather than a fuel-to-electric conversion model. All models under the Ora brand are purely electric, with no other energy forms. On August 31, 2018, at the Chengdu Auto Show, the pure electric SUV—Ora 1Q was officially launched, with an official guide price range of 188,800-204,800 yuan and a subsidized price range of 89,800-105,800 yuan. The Ora 1Q is positioned as a pure electric compact crossover SUV, equipped with Funeng, CATL ternary lithium-ion power battery, and BorgWarner permanent magnet synchronous motor, with a maximum power of 120kW, maximum torque of 280Nm, 0-100km/h acceleration in less than 8.9s, and a comprehensive range of 280km and 360km. On December 26, 2018, the second model under Great Wall Motors' new energy brand Ora, the Ora R1, was officially launched. This new car offers two NEDC range versions with comprehensive ranges of 310km and 351km, totaling six models, with subsidized prices ranging from 59,800 to 77,800 yuan. In terms of body dimensions, the new car measures 3495mm in length, 1660mm in width, and 1530mm in height (1560mm with optional antenna), with a wheelbase of 2475mm.

7

0

Share

How Often Should Engine Oil Passages Be Cleaned?

Engine oil passages are generally cleaned every 20,000 to 40,000 kilometers. The formation of oil sludge is a normal phenomenon, and any engine will produce oil sludge. The acceleration of oil sludge formation is closely related to vehicle condition, operating conditions, fuel quality, and vehicle maintenance. The following are the reasons that exacerbate engine oil sludge formation: Poor driving habits of the owner: Poor driving habits include frequently operating the engine at low temperatures or on short trips, frequent engine starts and stops, prolonged idling, and engine overheating. Under high temperatures, engine oil will oxidize more quickly. Improper vehicle maintenance: Using engine oil beyond its service life or failing to change it on time can lead to the formation of oxidized, insoluble substances under high temperatures, resulting in oil sludge. Improper use of engine oil, such as failing to keep it clean and dry or introducing impurities and moisture, can also contribute. During oil changes, old oil should be completely drained. Neglecting required maintenance, such as not replacing the three filters (air, oil, and fuel filters) regularly, can prevent maintaining a good internal engine environment. Poor-quality engine oil: Use high-quality lubricants produced by reputable manufacturers. PCV valve malfunction: The engine's crankcase ventilation valve is responsible for balancing crankcase pressure during high-speed operation. If the crankcase ventilation valve fails or becomes clogged, water vapor or other harmful pollutants inside the crankcase cannot be discharged in time. Through chemical reactions, this leads to the formation of oil sludge, creating a vicious cycle where the sludge becomes increasingly severe.

18

0

Share

What is the maintenance interval for Cadillac?

Cadillac's maintenance interval is every 6 months or 5,000 kilometers. Below is an introduction to vehicle maintenance items and their functions: Vehicle maintenance items: Replace engine oil and oil filter, replace oil filter element, air filter element, fuel filter element, cabin air filter element, transmission oil filter element, add windshield washer fluid, antifreeze, air conditioning refrigerant, check for wear on drive belts, clean throttle valve and cylinder carbon deposits, inspect chassis for damage, check body and tires. Functions of vehicle maintenance: Ensure optimal vehicle performance, improve driving safety, reduce engine noise, and extend vehicle service life.

15

4

Share

Is the Infiniti FX35 prone to high failure rates?

Currently, the Infiniti FX35 does not have a high failure rate. It is an important SUV model under the Infiniti brand, with excellent after-sales service, and generally does not encounter major issues in daily use. It offers great value for money, as luxury SUVs in the same category are slightly more expensive. Its engine and transmission are the biggest highlights, providing very fast acceleration. The Infiniti FX35 is equipped with a 3.5L V6 engine. The FX series is particularly notable for combining the appearance of an SUV and a sports car, making it very unique among its peers. With its distinctive design, powerful performance, luxurious interior, and exceptional safety features, the Infiniti FX series is often referred to as the "supercar of SUVs." It comes with dual-zone automatic climate control, an onboard navigation system, and a rear-seat DVD entertainment system, featuring a total of 11 speakers. Beneath its sleek exterior, it utilizes the same FR-L second-generation FM chassis as the M35/45, FX, and G coupe models. Compared to the first generation, it has a wheelbase of 2885mm, with more balanced weight distribution between the front and rear of the body, enhancing handling convenience.

13

0

Share

What is the difference between direct injection and hybrid injection in cars?

The differences between them lie in their different principles, advantages, and functions. Here are the specific details: Different principles: The hybrid injection engine combines multi-point electronic fuel injection and direct injection, resulting in the hybrid injection technology. It is a fuel supply system composed of both direct injection and manifold injection. Direct injection technology is a relatively new engine technology that has developed in recent years. It involves moving the fuel injector from the intake manifold to the inside of the cylinder, where fuel is directly injected into the combustion chamber to mix with air, enabling smooth and efficient combustion. Different advantages: The hybrid injection engine can improve work efficiency and also avoids the emission issues caused by excess oxygen in direct injection engines under low-load conditions. During combustion, direct injection technology creates an air layer that insulates heat, reducing heat transfer to the cylinder walls and minimizing heat loss, thereby enhancing the engine's thermal efficiency. Different functions: The purpose of hybrid injection is to combine the advantages of manifold injection and direct injection technologies to address the problems associated with traditional direct injection. Direct injection technology is quite mature; the key feature of a direct injection engine is the immediate injection of fuel at high pressure into the combustion chamber of the cylinder. The engine can automatically adjust the timing of valve opening while also regulating the amount of air entering the cylinder.

1

0

Share

What are the reasons for a car starter not working?

What are the reasons for the radiator fan of Wuling Hongguang not working?

Which cars are Ora pure electric vehicles?

How Often Should Engine Oil Passages Be Cleaned?

What is the maintenance interval for Cadillac?

Is the Infiniti FX35 prone to high failure rates?

What is the difference between direct injection and hybrid injection in cars?

What is the normal fuel consumption for the Leiling 1.2?

What is the fuel consumption of Haojue Suzuki USR125?

What are the tips for parking an automatic transmission vehicle on a slope?

What does the little yellow duck on the car mean?