···
Log in / Register

What are the precautions for driving during flood season?

1Answers
SanAdrian
07/29/2025, 09:18:05 PM

Before driving, check the windshield wipers. If you find that the wipers' water-sweeping ability has decreased, replace them promptly. In thunderstorm weather, the driver's visibility will be affected, so slow down and maintain a safe driving distance from the vehicle ahead, avoiding frequent overtaking and lane changes. Turn on the width lights and fog lights when driving in the rain to help the following vehicle judge the position and reduce the occurrence of rear-end collisions. More details are as follows: 1. Pay attention to weather conditions such as rainfall: Before traveling, closely monitor weather conditions like rainfall, try to avoid sections with water accumulation, such as low-lying areas, culverts, and under overpasses, and stay informed about the depth of water accumulation and road congestion to make a reasonable travel plan. During flood season, avoid using heavily worn tires to prevent accidents caused by reduced friction with the ground. 2. Do not drive too fast: Roads are slippery in the rain, and vehicles are prone to skidding when driving too fast or braking suddenly. Moreover, excessive speed can create a water film between the tires and the ground, leading to "hydroplaning." Therefore, reduce driving speed in the rain. When driving in urban areas, use low gears as much as possible, and the speed should preferably not exceed 40 km/h. On highways, the speed should be controlled within 60-80 km/h. The safe following distance in rainy conditions should be more than three times the normal safe distance, especially on highways, where you should maintain a safe distance from the vehicle ahead and avoid following large trucks.

Was this review help?
110
Share
More Q&A

Is taking photos required for a driver's license test?

Taking photos is usually required for a driver's license test, depending on the arrangements of each driving school. Here is a brief introduction about driver's licenses: 1. Basic Information: A driver's license (full name: motor vehicle driver's license), also known as a "driving license," is a document issued by the government transportation department to individuals who qualify to drive, usually in the form of a card. 2. Requirements for Obtaining: To obtain a driver's license, one must meet the minimum age requirement and pass the driving qualification exam. The driver's license typically specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc.
111
Share

Will a B2 License Be Directly Downgraded for 12 Demerit Points?

Under the new traffic regulations, a B2 license will not be downgraded for 12 demerit points. According to the Road Traffic Safety Law, effective from April 1, 2022, if an A or B driver's license accumulates 12 demerit points, the license can be reinstated through study and examination without being downgraded. However, if 12 points are deducted multiple times within one cycle, the study period will be extended, and additional study content and examination subjects will be required. For a B2-type motor vehicle driver's license, if the accumulated demerit points do not exceed 12, the driver must attend a training course after the demerit period ends to restore the points. The license can then be used normally without any impact. However, if the points exceed 12 and involve serious traffic accidents, the license may be permanently revoked. The B2 driver's license primarily authorizes the operation of vehicles such as fire trucks, water sprinklers, and other specialized vehicles. This license can be obtained by individuals aged 20 or older and remains valid until the age of 60. Applicants over 50 years old are not eligible to take the B2 license examination. B2 License Examination Subjects: Subject 1 covers: road traffic rules, traffic signals, handling of traffic violations and accidents, regulations on motor vehicle driver's license application and use, motor vehicle registration, and other relevant road traffic laws and regulations. Subject 2 includes: large truck testing with components like pole parking, hill starts, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate passing, continuous obstacle negotiation, bumpy road driving, narrow road U-turns, and simulations for highways, mountainous roads with sharp turns, tunnels, rain/fog conditions, slippery roads, and emergency handling. Subject 3 (Road Driving Skills) covers: preparation for driving, starting, straight-line driving, gear shifting, lane changing, roadside parking, straight-through intersections, left/right turns, pedestrian crossings, school zones, bus stops, meeting vehicles, overtaking, U-turns, and night driving. The test must cover at least 10 kilometers, with at least 5 kilometers during the day and 3 kilometers at night. For large trucks, local traffic authorities may add complex road conditions like mountainous areas, tunnels, and steep slopes. Subject 4 (Safe and Civilized Driving Knowledge) includes: safe driving practices, knowledge for driving under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident procedures.
102
Share

What Does a Level 2 Autonomous Driving Assistance System Include?

Adaptive cruise control, AEB (Automatic Emergency Braking) system, and lane keeping assist are the "basic" functions of Level 2 autonomous driving. Here is more information about autonomous driving levels: 1. Level 1: Can assist the driver in completing certain driving tasks, such as the adaptive cruise control (ACC) function installed in many models, where radar is used to control the distance between vehicles and adjust speed in real-time, widely applied in many domestic models. 2. Level 2: Can automatically complete certain driving tasks and, after processing and analysis, automatically adjust the vehicle's state. For example, Tesla's lane keeping function belongs to this level, which can not only control acceleration and deceleration but also manage the steering wheel. However, the driver still needs to observe the surrounding conditions to ensure safe operation. 3. Level 3: At this level, the vehicle is controlled by a more logical driving computer, and the driver does not need to keep hands and feet ready. The vehicle can independently complete driving operations in specific environments, but the driver cannot sleep or rest. When artificial intelligence cannot make accurate judgments, manual operation is still required. The recently launched BMW X7 claims to have achieved this level of autonomous driving technology.
108
Share

How many days after applying for the Subject 1 test can you confirm your appointment?

Normally, after a student submits an online application, the system will process the appointment within 4 to 6 days, and the student will receive an SMS notification. However, due to varying numbers of applicants, the queue for Subject 1 appointment processing and the time taken for successful processing may differ. Those who have previously canceled an appointment or are reapplying are usually given priority in scheduling. The Subject 1 test is primarily a theoretical exam, covering knowledge of traffic signals, traffic regulations, and driving-related topics. It consists of 100 questions, with each examinee receiving a different set randomly selected from a question bank based on a specific ratio. A score of over 90 is required to pass, and the exam duration is 45 minutes. If a candidate fails the Subject 1 test for the first time, they can raise their hand to signal the invigilator for a re-verification of information and a retake. If the retake is also unsuccessful, it means the candidate has failed the exam and needs to reapply. Once the Subject 1 test is passed, the candidate will receive a driving study certificate, and all remaining subjects must be completed within three years.
117
Share

How Long Does It Take to Complete 1600 Questions for Subject One?

Subject One's 1600 questions usually take about a week to complete. Here is a brief introduction to Subject One: 1. Basic Information: Subject One refers to the driver's theory test, a mandatory licensing exam conducted at the vehicle management office for license applicants. The test content includes the most fundamental knowledge such as driving theory basics, road safety laws and regulations, traffic signals, traffic rules, as well as local regulations. The scheduling of the driver's theory test is arranged independently by local vehicle management offices. 2. Exam Sequence: The exams proceed in the order of Subject One, Subject Two, and Subject Three. After passing the previous subject, applicants can proceed to the next subject's exam. Those who fail a subject must retake that subject's exam. Subject One is part of the motor vehicle driver training teaching and examination syllabus. The examination section of this syllabus is divided into three subjects, organized by the traffic management departments of public security authorities.
117
Share

Is it necessary to clean the fuel injectors? How often should they be cleaned?

It is very necessary, and the cleaning cycle for fuel injectors is every 2 years or 50,000 kilometers. Below is relevant information about fuel injectors: 1. Definition: A fuel injector is essentially a normally closed valve (a normally closed valve remains shut when there is no control signal input, whereas a normally open valve stays open without a control signal). The opening and closing of the valve are controlled by the up-and-down movement of a needle valve. When the ECU issues a fuel injection command, the voltage signal causes current to flow through the coil inside the injector, generating a magnetic field that lifts the needle valve, opening the valve to allow fuel to spray out through the injector nozzle. 2. Impact of carbon deposits: As one of the key components of an electronic fuel injection engine, the performance of the fuel injector significantly affects the engine's overall performance. Clogged fuel injectors can severely impair vehicle performance. The blockage occurs due to carbon deposits accumulating on the injectors or impurities in the fuel obstructing the injector's pathways. After a period of driving, certain deposits will form in the fuel system.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.