···
Log in / Register

What are the points deducted for parallel parking?

6Answers
ClaytonLynn
07/29/2025, 01:01:14 AM

Subject 2 parallel parking deduction points include stopping midway, stalling, and the car crossing the line after reversing, etc. The passing score for Subject 2 is 80 points, and a score below 80 is considered a fail. Candidates need to wait for a period before scheduling a retest, with the number of attempts not exceeding five. Relevant information about the driving test is as follows: 1. Introduction one: The driving license test is an examination to obtain a motor vehicle driving license. The test content and passing standards are unified nationwide, generally divided into four test subjects: theoretical knowledge test, field driving performance test, road driving performance test, and civilized driving-related knowledge. 2. Introduction two: Subject 2 is the field driving skills test, including 16 test contents such as reversing into a garage and parallel parking. After passing all four subjects, one can obtain a motor vehicle driving license. Individuals aged 18 and above can take the test. Subject 2 generally requires a cumulative total of 26 study hours, including 2 hours of theoretical knowledge and 24 hours of practical operation. Only after completing the required study hours can one schedule the test.

Was this review help?
104
Share
StAriel
08/12/2025, 02:15:25 PM

When I was learning parallel parking for my driver's license test, I made quite a few mistakes. The main points for penalty were in these areas. Hitting the line was the most common—if the wheels touched the curb or the parking space lines, it was an immediate penalty, and the test would be failed. The entire car body couldn’t go out of bounds either; it had to be completely within the designated area. The positioning had to be precise—parking too far from the curb, like over 30 centimeters, would also result in a penalty. If the engine stalled or the parking process was interrupted during the operation, points would be deducted. Don’t forget to use the turn signals—starting and stopping during the test required proper signaling, or else points would be lost. There was also a time limit, usually 90 seconds to complete; exceeding it would lead to a penalty. Later, when I practiced more, I paid extra attention to mirror adjustments, took my time reversing, and avoided rushing the process. After about ten tries, I got the hang of it, making the test easier to pass—but safety always comes first. Keep these in mind, and beginners can start off more steadily.

Was this review help?
3
Share
Expand All
MacEloise
10/03/2025, 01:02:07 AM

From years of driving experience, the key points that deduct marks in parallel parking include wheel crossing the line and vehicle body exceeding boundaries - touching the curb or parking space lines with wheels results in major deductions. Inaccurate parking position is also problematic, such as being over 30cm away from the curb, which incurs penalties. Operational smoothness is crucial - stopping midway or stalling the engine counts as deductions. Correct indicator usage is mandatory - failing to signal left or right during the test leads to deductions. Time control is essential, with a strict 90-second limit. I learned the hard way during my younger days' test - more practice in simulation areas, driving slowly without recklessness, gradually depressing the clutch, and avoiding sudden braking helped. Even now while driving, I occasionally remind myself to check mirrors more frequently and measure side distances accurately. Remember, mark deductions aren't trivial - they directly impact test results. Developing good habits during practice makes perfect.

Was this review help?
8
Share
Expand All
OMackenzie
11/16/2025, 01:41:37 AM

From a teaching perspective, common point deductions in parallel parking include touching the lines (wheels touching the curb or parking space boundaries), vehicle body exceeding boundaries, and incorrect positioning (e.g., being more than 30cm away from the curb). During operation, stopping or stalling the engine results in point deductions; incorrect indicator usage also leads to deductions; exceeding the 90-second time limit incurs penalties. It's recommended to focus on mirror positioning during practice, perform movements slowly, maintain steady clutch control, and avoid rushing when starting. Repeated practice will lead to proficiency, ensuring a smooth pass in the driving test.

Was this review help?
18
Share
Expand All
OLaura
01/06/2026, 03:18:05 AM

I just passed my driving test last month, and I still remember the points deduction for parallel parking. Crossing the line is a common mistake—touching the line with the wheels will cost points; completely exceeding the line with the car body also deducts points. Parking position must be precise, such as being more than 30 cm from the curb, which deducts points. Stalling or interrupting the parking operation will cost points. Turn signals are mandatory—failing to signal definitely deducts points. The time limit is 90 seconds, exceeding it will cost points. After the test, I shared some tips: practice more in real test conditions, control the throttle gently, observe both side mirrors to avoid deviation, rest well before the test to stay calm, and avoid mistakes.

Was this review help?
5
Share
Expand All
LeRhett
04/03/2026, 02:37:25 AM

Having driven for many years, I've noticed that there are quite a few points where you can lose marks in the parallel parking test. The most common deductions are for touching the line (wheels touching the curb or parking space line); the car body going out of bounds; incorrect positioning, such as being more than 30 centimeters away; stalling or stopping during the operation; incorrect use of turn signals; and exceeding the 90-second time limit. When practicing, use the mirrors more to anticipate the position, reverse slowly at a steady speed, and don't panic. Simulate parallel parking more often during regular driving, and you'll get the hang of it with practice.

Was this review help?
12
Share
Expand All
More Q&A

What brand of transmission oil is used for the Audi A6L?

Audi A6L uses continuously variable transmission (CVT) oil, with the model number LGA052180A2. It is generally recommended to replace the transmission oil for the Audi A6L after driving approximately 60,000 kilometers. The replacement intervals vary for different vehicle models. Below are the recommended replacement cycles for transmission oil: Manual Transmission: Manual transmission oil is typically recommended to be replaced every three years or after driving about 100,000 kilometers. Automatic Transmission: Automatic transmission oil is generally recommended to be replaced every two years or after driving approximately 40,000 kilometers. Continuously Variable Transmission (CVT): CVT oil is usually recommended to be replaced every two years or after driving around 60,000 kilometers. The methods for replacing transmission oil are as follows: 1. Loosen the drain screw at the bottom of the transmission to drain the oil, then refill. 2. Remove the transmission oil pan directly to drain the oil and refill: This method is more thorough than the previous one, as it removes impurities accumulated at the bottom of the oil pan. 3. Use a circulation machine to replace automatic transmission oil: Dynamic oil replacement with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
113
Share

What causes the jerking sensation when releasing the accelerator in an Audi Q5?

Audi Q5 may experience jerking when releasing the accelerator due to fuel issues or engine oil system problems. Here are the detailed explanations and solutions: Fuel issues: The solution is to perform some simple checks, such as whether the wrong fuel was added. This is also possible, as using lower-grade gasoline may result in weak acceleration, leading to reduced engine power and increased fuel consumption. Engine oil system problems: The importance of engine oil is self-evident; it provides sufficient lubrication, reduces resonance, and enhances the smoothness of engine operation. If the engine oil is insufficient for a long time, it may cause insufficient power and increased fuel consumption in mild cases, or piston impact and mechanical damage to related components in severe cases. Additionally, a faulty fuel pump or a clogged fuel filter can also lead to reduced engine power.
115
Share

Where is the reverse camera module located on the Audi Q5?

Audi Q5's reverse camera module is located on the rear door. Introduction to Reverse Camera: The vehicle reverse camera panoramic view system can provide four video outputs, namely front, rear, left, and right. Cameras are installed at the front of the vehicle, the rear, and below the side mirrors. It is controlled remotely and can automatically switch between views. The video can be composed of four feeds or a single feed, enhancing anti-theft monitoring and driving safety. Function of Reverse Camera: The reverse camera system provides a more intuitive and clear view of the rear when reversing, making it one of the most practical safety features for reversing. When the reverse gear is engaged, the system automatically activates the high-definition rear camera, displaying the rear view clearly on the LCD screen, allowing the driver to accurately assess the road conditions behind.
102
Share

What is the 0-100 km/h acceleration time of the Audi Q3?

According to official data, the Audi Q3 comes with two engine options: 1.4T and 2.0T. The 1.4T model accelerates from 0-100 km/h in 9.44 seconds, while the 2.0T version achieves it in 7.83 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque essentially represents the engine's strength. Higher torque means greater force to propel the vehicle, resulting in faster acceleration. The Audi Q3 2.0T accelerates from 0-100 km/h in 7.83 seconds with a maximum torque of 350 Nm, while the BMW X1 does it in 7.66 seconds with 280 Nm of torque. Transmission efficiency: The transmission acts as a medium for power delivery and inevitably involves power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi Q3 uses a 7-speed dual-clutch transmission across all models. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Audi Q3 2.0T accelerates from 0-100 km/h in 7.83 seconds with a power-to-weight ratio of 146 Hp/T, while the BMW X1 does it in 7.66 seconds with 120 Hp/T.
120
Share

What are the reasons for loud noise while driving an Audi Q5?

Audi Q5 may produce loud noise while driving due to engine damage. Here are the detailed explanations and solutions: Engine Damage: For engine noise, it is recommended to apply a high-grade acoustic foam material under the hood. This can absorb and dissipate a significant amount of engine noise, suppress hood vibrations, and block heat from the engine, protecting the car's paint surface from high-temperature damage. Normal Conditions: The Audi Q5's engine noise control is excellent. Under normal driving conditions on good road surfaces at speeds below 120 km/h, the engine noise is barely audible inside the car.
101
Share

How many cylinders does the Audi R8 have?

Audi R8 has 10 cylinders and is the first purebred sports car in Audi's history. Introduction to power: The Audi R8 is equipped with a 4.2-liter V8 engine, with a maximum horsepower of 420hp and a peak torque of 43.9kgm. It can complete the 0-100km/h acceleration process in 4.6 seconds, and the highest speed can reach 301km/h. Function of cylinders: Cylinders are commonly used power components in mechanical equipment. They convert the pressure energy of compressed air into mechanical energy, driving the mechanism to achieve reciprocating linear motion, swinging, or rotational motion.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.