···
Log in / Register

What are the physical examination requirements for a C1 driver's license?

6Answers
DelJuliette
07/29/2025, 01:10:23 PM

The physical examination requirements for a C1 driver's license are as follows: 1. Height: Applicants for large buses, tractors, city buses, large trucks, and trolleybuses must be at least 155 cm tall. Applicants for medium-sized buses must be at least 150 cm tall. 2. Vision: Applicants for large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, or trams must have uncorrected or corrected visual acuity of at least 5.0 on the logarithmic visual acuity chart. Applicants for other vehicle types must have uncorrected or corrected visual acuity of at least 4.9 on the logarithmic visual acuity chart. 3. Color vision: No red-green color blindness. 4. Hearing: Able to distinguish the direction of sound sources with each ear at a distance of 50 cm from a tuning fork.

Was this review help?
103
Share
MacBenjamin
08/14/2025, 03:35:33 AM

I just passed my C1 license test last year, and I remember the medical check-up items very clearly. Your vision must meet the standard—either naked-eye or corrected vision should be above 4.9, so myopic friends should remember to wear glasses for the check. They also test for color blindness and color weakness—the doctor will show you color cards to identify numbers, mainly ensuring you can distinguish red and green. There are hearing requirements too—you must be able to hear a tuning fork sound from 50 cm away and distinguish left from right. For fingers, both thumbs must be intact, and each hand must have at least three other normal fingers. Legs and feet must move freely, and the length difference between the two legs should not exceed 5 cm. Most importantly, you must not have conditions like epilepsy or severe heart disease that could cause sudden episodes—you’ll confirm your medical history when filling out the form. The whole process is quite quick—just remember to bring your ID card and photos.

Was this review help?
20
Share
Expand All
SanDaniela
08/14/2025, 03:36:17 AM

Over the years of coaching students for driver's license tests, the most common issue during physical exams is failing the vision test. The requirement is uncorrected or corrected visual acuity of 4.9, and both glasses and contact lenses are acceptable. Color vision testing is particularly important—red-green color blindness is an automatic disqualification since recognizing traffic lights is essential. During the hearing test, the doctor gently produces sound with a tuning fork near the ear, and you must accurately identify the direction (left/right). Hands must have complete thumbs; missing one or two segments on other fingers is generally acceptable as long as it doesn’t affect steering grip. Lower limbs need flexible movement—a significant leg length discrepancy disqualifies manual transmission driving. It’s advisable to check for conditions like vertigo or epilepsy history beforehand; those with serious underlying illnesses should consult a doctor first. Lastly, note that those aged 70+ must undergo annual re-examinations.

Was this review help?
11
Share
Expand All
SanMarcus
10/13/2025, 01:25:29 AM

Our medical center conducts C1 driver's license physical examinations focusing on these key criteria: visual acuity must be 4.9 or above, color vision is tested using red-green blindness charts, and hearing assesses directional sound recognition. Upper limb examination requires intact thumbs and at least three functional fingers on each hand. Lower limbs must be fully functional and flexible with no more than 5cm length discrepancy. Special attention is given to screening neurological disorders—applicants with epilepsy or Parkinson's disease are ineligible. Applicants aged 70+ must provide annual medical certification. Bring your ID card and a 1-inch white-background photo; those with chronic conditions should prepare medical records in advance to save time.

Was this review help?
2
Share
Expand All
MatteoAnn
11/26/2025, 01:24:47 AM

As someone who has gone through the driving test, I'd like to remind everyone that the most easily overlooked detail in the C1 physical examination is the finger requirements. My friend almost failed because he lost half of his little finger in an early work injury. According to regulations, both thumbs must be intact, and each of the other fingers must have at least three healthy ones remaining. Vision tests allow for wearing glasses, but if your prescription has changed suddenly, make sure to update your glasses. Don't get nervous during the hearing test when they use a tuning fork near your ear. Elderly individuals should pay special attention to the age threshold—after 70 years old, you'll need to undergo a physical examination every year. Prepare white-background ID photos and copies of your ID card. If you have high blood pressure, remember to take your medication to control it on the day of the exam, as excessively high blood pressure may lead to disqualification.

Was this review help?
9
Share
Expand All
ErinFitz
01/16/2026, 02:52:37 AM

Last time I accompanied my cousin for a physical exam and discovered some lesser-known facts. For example, corrected vision includes contact lenses, but color vision deficiency tests prohibit wearing them. Hearing tests use old-fashioned tuning forks to assess left-right sound localization, which requires more concentration than expected. Finger requirements are specific: both thumbs must be intact, while missing more than two other fingers is considered disqualifying. The lower limb examination includes a squatting motion to evaluate joint mobility. Remember to truthfully report medical history, especially any history of epilepsy. Finally, a reminder for those taking driving tests in different locations: the physical exam form is valid for three months, so it's recommended to get tested two weeks before the written exam to avoid expiration.

Was this review help?
11
Share
Expand All
More Q&A

How to Remove the Car Windshield Washer Nozzle?

To remove and install the car washer nozzle, locate the nozzle position and simply use a screwdriver to pry it up. Below are precautions for using the car washer nozzle: 1. Check the nozzle's spray position: If the spray position is incorrect, adjust it promptly. The normal spray position should direct the cleaning fluid to the upper-middle part of the windshield. As the fluid flows down, the wiper blades will evenly spread it across the entire windshield, cleaning and removing dirt. Generally, the nozzle position can be adjusted manually. Some models have screws fixing the nozzle, which can be loosened before adjustment. 2. Regularly check and replenish the windshield washer fluid: If the fluid runs out and the driver continues to use the spray switch, the pump will run dry, causing the motor to overheat and burn out due to lack of fluid flow.
103
Share

Can the Vehicle License Show the National Emission Standard?

Methods to check the national emission standard on the vehicle license: Directly check the vehicle model number on the license. 'Y' indicates the National IV emission standard, and 'V' indicates the National V emission standard. However, after testing by most people, it has been confirmed that this method is not applicable to all vehicle models. Other methods to check the emission standard: 1. Vehicle's environmental protection label: The simplest and most direct method is to look at the vehicle's environmental protection label, which has clear markings on the back. 2. Factory certificate: For new vehicles, you can check the vehicle's factory certificate or vehicle conformity certificate. 3. Query platform: You can also log in to the public query platform of the Motor Vehicle Environmental Protection Network, enter the vehicle's VIN number (Vehicle Identification Number) and the last 6 digits of the engine number to query vehicle information.
114
Share

What Causes the Abnormal Noise When Releasing the Brake at Car Start?

Abnormal noise when releasing the brake at car start is due to damage in the brake system. The specific reasons are as follows: 1. Brake Pads: Abnormal clearance in the brake pads. 2. Brake Disc: Uneven hardness of the brake disc, affecting the uneven surface of the brake pads. 3. Braking: Release the brake once before the vehicle comes to a complete stop, then lightly apply the brake until the vehicle stops moving. 4. Engine Braking: When braking while the vehicle is in a curve, reduce the speed sufficiently through braking. However, if it's too late to slow down, the brake can be used briefly according to the situation. Emergency braking on slippery curved roads can easily cause the tail to swing out, which can be mitigated by downshifting the gearbox and utilizing engine braking to slow down.
118
Share

When Should Engine Oil Be Changed Based on Color?

Engine oil must be replaced when it turns deep black. Below are specific methods for selecting engine oil for your car: 1. Performance selection: If you prioritize the long-term effectiveness of the oil, you can choose Mobil oil; if you focus on the oil's cleaning ability for the engine, you can use Shell lubricants; if you need lubricants with strong oil film toughness, it is recommended to use Castrol. 2. Driving conditions: If you frequently drive in congested areas, have an older vehicle, or operate heavy-duty vehicles for long-distance transportation, the viscosity of the lubricant can be appropriately increased. 3. Engine type: For naturally aspirated engines, you can choose mineral oil or semi-synthetic oil. Compared to naturally aspirated engines, turbocharged engines have a more compact structure and operate under harsher conditions, requiring higher-quality lubricants with better fluidity, preferably full synthetic oil.
118
Share

What is the normal cylinder pressure for a car engine?

Automobile engine cylinder pressure is around 1000kpa. Generally, gasoline engines are around 1000kpa, diesel engines are around 2000kpa, most fuel injection engines have cylinder pressures between 1200~1400kPa, and a few high-compression ratio engines have cylinder pressures above 1700kPa. A cylinder is a part of the car's combustion chamber where there is a piston pushed by the pressure or expansion force of the working fluid. The classification of cylinders is as follows: 1. Single-acting cylinder: Only one end has a piston rod, with air supplied from one side of the piston to generate pressure, which pushes the piston to extend, and returns via spring or self-weight. 2. Double-acting cylinder: Air is alternately supplied from both sides of the piston, outputting force in one or two directions. 3. Diaphragm cylinder: Uses a diaphragm instead of a piston, outputting force in only one direction, with spring reset. It has good sealing performance but a short stroke.
107
Share

What are the steps for bumper removal and installation?

Here is the method for removing the bumper: 1. Park the vehicle on a lift, take safety measures, and raise the vehicle to an appropriate height. 2. Remove the bolts on the left and right sides of the rear bumper. 3. Pull the rear bumper out parallel from the guide channel, completing the bumper removal. Here is some related information: 1. Traditional bumpers: The car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle body. Twenty years ago, front and rear bumpers of cars were primarily made of metal materials, using steel plates over 3mm thick pressed into U-shaped channels, with chrome-plated surfaces, riveted or welded to the frame longitudinal beams, leaving a significant gap from the body, appearing as an additional component. 2. Modern bumpers: With the development of the automotive industry, car bumpers, as an important safety device, have also evolved. Today's front and rear bumpers not only maintain their original protective functions but also strive for harmony and unity with the vehicle's styling and pursue lightweight design.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.