What are the length, width, and height of the Skoda Octavia?

3 Answers
LeRachel
07/25/25 5:46am
Skoda Octavia's length, width, and height are: 4675mm, 1814mm, and 1460mm respectively, with a wheelbase of 2686mm. The Octavia is a compact sedan under the Skoda brand, featuring a minimum ground clearance of 155mm, a body weight of 1210kg, and a trunk volume ranging from 590 to 1580 liters. The Skoda Octavia is equipped with a 1.2T inline 4-cylinder turbocharged engine, delivering a maximum horsepower of 116PS, a maximum torque of 200Nm, and a maximum power output of 85kW. The engine reaches its maximum power at 5000rpm and its maximum torque between 1800 to 3700rpm. It is paired with a 7-speed dual-clutch transmission.
Was this review help?
16
5
Share
SanEliza
08/11/25 12:53pm
The specific dimensions of the Skoda Octavia are something I pay close attention to when driving. The length is generally around 4.7 meters, the width is about 1.8 meters, and the height is approximately 1.45 meters. These figures are for the standard sedan version, which is quite suitable for city driving, making parking less of a hassle. The width ensures a spacious interior, and I often take friends out with me—everyone says the seating is comfortable. The height is just right, providing good visibility while driving, and it doesn’t feel unstable in rainy conditions. The trunk space is also generous, easily accommodating luggage or shopping bags. For the estate version, the length might increase to over 4.8 meters, but it still falls into the compact car category. In terms of fuel consumption, the moderate size helps save on gas, and I’ve always found the mileage to be quite economical. Overall, the Octavia’s dimensions are practical and well-suited for family or commuting use.
Was this review help?
7
0
Share
Expand All
Long
09/27/25 5:02am
From a design perspective, the Škoda Octavia achieves excellent dimensional balance. Its 4.7-meter length contributes to smooth body lines, low drag coefficient, and effortless acceleration. The 1.8-meter width enhances stability, preventing drifting during high-speed cornering, while the 1.45-meter height maintains a low center of gravity, improving handling safety. Compared to other vehicles in its class, this dimensional combination stands out in the compact segment. Having tested various model years, I've observed minimal size variations, with post-2010 models generally maintaining these dimensions. The estate version is slightly longer at approximately 4.85 meters, yet maintains harmonious proportions. The width advantage becomes particularly noticeable during parking, facilitating precise distance control. Prospective buyers should consult specific model year manuals as different configurations may feature minor dimensional adjustments.
Was this review help?
3
1
Share
Expand All
More Forum Discussions

How Long Does It Take to Master Reverse Parking?

Generally, learning reverse parking requires four sessions per day, taking about a week to master. Evaluation Criteria for Reverse Parking: Failing to follow the designated route or sequence results in disqualification; vehicle body touching the line or failing to park properly results in disqualification; exceeding 210 seconds to complete reverse parking results in disqualification; stopping midway deducts points each time. Operational Techniques for Reverse Parking: Control the speed: Maintain a consistent speed using only first gear or reverse gear; the speed at which you start should be maintained throughout. Steering timing: Carefully observe during the reversing process, grasp the key points of steering, and turn at the right moment. Control the path: The vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, accurately align with the boundary lines, promptly correct the direction, and ensure the vehicle enters the parking space straight.
15
2
Share

What is the fuel tank capacity of the Peugeot 3008?

The Peugeot 3008 comes with 2 variants, featuring a fuel tank capacity of 56 liters. The vehicle is equipped with a 1.6T turbocharged engine and all models use a 6-speed automatic transmission (AT). Among its peers, the 2021 Tharu has a fuel tank capacity of 51 liters, the 2022 Xingyue L has 55 liters, and the 2022 Qashqai has 57 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by automakers is measured from the tank bottom to the safety level, while there is additional space from the safety level to the tank opening. This space ensures that fuel can expand when temperatures rise without overflowing the tank. If fuel is filled up to the tank opening during refueling, the actual fuel quantity may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E and F. When the needle approaches E, it indicates low fuel, while nearing F means sufficient fuel.
10
4
Share

What is the failure rate for Subject 2 (Parking and Driving Skills)?

Around 80%, with some regions stipulating that the pass rate for Subject 2 cannot exceed 80%. Test items: The test items include stake test, hill start, parallel parking, single-plank bridge crossing, curve driving, right-angle turn, narrow gate passing, continuous obstacle negotiation, bumpy road driving, narrow road U-turn, as well as simulated highway driving, continuous sharp turns on mountain roads, tunnel driving, rainy (foggy) conditions, slippery road driving, and emergency handling. Subject 2 techniques: When exiting the right parking space, pay attention to the alignment between the dashed line and the car door line. When they coincide, immediately turn the steering wheel fully to the left (full left lock) to avoid the wheels pressing against the right-angle corner. After the car exits the parking space, when the car body is straight, turn the steering wheel 45 degrees back to the right.
19
5
Share

What are the four major car ECU programming brands?

Here are the four major car ECU programming brands: DNA-Tuning: DNA-Tuning is currently the largest ECU software development company in the UK, offering mature and reliable tuning solutions for various vehicle models. DNA-Tuning specializes in European cars, with over 25 years of industry experience making it well-known in the field. REVO: REVO is another UK-based brand, excelling in tuning Volkswagen Group models and recognized as one of the world's top three programming providers. APR-APR: APR is a US-based company officially endorsed by Volkswagen Group in America, demonstrating exceptional expertise in tuning Volkswagen models. APR's founder was a professional race car driver, enabling the company to also develop racing ECU programs. GIAC: GIAC is an ECU programming company with 20 years of history, achieving notable success in ECU modification with stable programs, though at a relatively higher price point.
20
2
Share

How long after the face-to-face signing can I take the Subject 1 test?

Subject 1 is usually scheduled about one week after the face-to-face signing. However, the prerequisite for taking the test is completing all the required study hours. Subject 1 test content: Basic knowledge of motor vehicles; laws, regulations, and road traffic signals; fundamentals of safe and civilized driving; basic knowledge related to motor vehicle operation. Test procedure: Follow the staff's instructions to collect your driving school file in order at the waiting area; Bring and present your ID card for inspection by the supervising officer; Mobile phones must be turned off when entering the test area; No loud talking is allowed in the test area; Regulation textbooks are not allowed in the test area (or should be placed in your bag); After the test, keep your ID card safe and submit the file to the "Document Submission Window" at the front of the test area; Candidates who pass the test will sign under the guidance of the staff at the exit before leaving; Candidates who fail the test can leave immediately and wait for their driving school to notify them of the retake time.
3
1
Share

How many seconds can the clutch be pressed during the start of Subject 3?

The clutch should not be fully pressed for more than five seconds, and the half-clutch state should not exceed fifteen seconds. If you feel the half-clutch is held for too long, immediately press it fully and then return to the half-clutch state, as the computer system will then recalculate the time. Subject 3: Includes the road driving skills test and the safety and civilized driving knowledge test. It is part of the motor vehicle driver's license assessment and is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. Test content: Vehicle preparation, light simulation test, starting, driving in a straight line, gear shifting operations, changing lanes, parking by the roadside, driving straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting vehicles, overtaking, making U-turns, and nighttime driving. The safety and civilized driving knowledge test generally includes: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations such as tire blowouts, and knowledge of post-accident handling procedures.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.