···
Log in / Register

Where is the cigarette lighter fuse in the Audi Q5?

6Answers
VanAddyson
07/28/2025, 08:02:12 PM

The cigarette lighter fuse in the Audi Q5 is located above the driver's foot pedal, while the rear fuse is positioned on the side of the trunk. The specific location of the cigarette lighter is clearly indicated on the inside of the fuse box cover. The cigarette lighter is a vehicle device that draws power from the car's electrical system to heat metal heating elements, such as heating plates or wires, providing a flame source for lighting cigarettes. Taking the 2018 Audi Q5 Classic Edition 40TFSI quattro Progressive as an example, the vehicle measures 4629mm in length, 1898mm in width, and 1655mm in height, with a wheelbase of 2807mm. It is a 5-door, 5-seat SUV equipped with an 8-speed automatic transmission, capable of reaching a top speed of 230 kilometers per hour.

Was this review help?
104
Share
VonChristopher
08/11/2025, 11:15:23 PM

When I was driving my Audi Q5, the cigarette lighter suddenly lost power, and I spent a long time looking for the fuse location. Generally, under the driver's seat, near the foot pedal area, there's a plastic cover. Pry it open, and you'll see the fuse box. Inside, there are a bunch of small squares—to find out which one is for the cigarette lighter, you'll need to check the vehicle manual or the diagram on the fuse box cover. It's usually labeled with something like F19. If it's blown, the fuse will have a broken wire inside. Replacing it is simple: buy a fuse with the same amperage, use tweezers to pull out the old one, and plug in the new one—done in a snap. Remember to disconnect the car's power before working on it to avoid electric shock risks. If the cigarette lighter keeps blowing fuses, it's often because you're using high-power devices like a car vacuum or there's a short circuit due to dust buildup in the socket. While checking, clean out any tobacco residue to prevent future issues. Don’t overlook these small components during regular maintenance—safe driving is crucial.

Was this review help?
19
Share
Expand All
Ellie
10/01/2025, 02:45:35 AM

The cigarette lighter fuse for the Audi Q5 is located in the fuse box on the driver's side, hidden above the footrest near the door. You'll need to bend down and lift a small cover. Each fuse inside the box is marked with a number, and the cigarette lighter typically corresponds to fuse F19 or F43. If it's blown, remove the old fuse and replace it with a new one, ensuring the current matches to prevent secondary damage. Common causes of blown fuses include using high-power devices like overloaded car charger adapters or long-term water accumulation leading to corrosion. When checking, bring a flashlight and multimeter to test if the fuse is truly broken and to inspect for other potential circuit issues. Avoid using the cigarette lighter in humid weather to extend its lifespan. Driving without power can be inconvenient, so addressing the issue early saves trouble.

Was this review help?
1
Share
Expand All
LenaRose
11/14/2025, 03:33:14 AM

The cigarette lighter fuse is located in the fuse box under the driver's seat of the Audi Q5. Remove the cover to reveal a cluster of fuses, and refer to the manual to identify the specific fuse for the cigarette lighter. If it's blown, replace it with a new one, ensuring safety by disconnecting the car battery during the process. The operation is straightforward with standard tools. For prevention, avoid plugging in devices that exceed the capacity.

Was this review help?
14
Share
Expand All
Randy
01/04/2026, 10:22:06 PM

I experienced a malfunction with the Audi Q5 cigarette lighter. The fuse location is in a hidden compartment near the driver's side, usually revealed by lifting the cover near the foot pedal. Each fuse inside is clearly numbered, with the cigarette lighter marked by a circular dot or an 'F' prefix, such as F19. After it blows, replacing it with one of the same specification takes just a few minutes. Why does it blow? Common causes include using a low-quality charger or moisture from the air conditioner vent entering the cigarette lighter socket. During repairs, ensure the car interior is dry and wear gloves to prevent accidents. If you're unsure, have a professional check the entire wiring of the fuse box. Even when the cigarette lighter is unused, avoid letting foreign objects fall in; regular cleaning can reduce malfunctions. Safe driving starts with attention to detail.

Was this review help?
19
Share
Expand All
VonAmy
04/01/2026, 10:21:23 PM

During a business trip, the cigarette lighter in my Q5 stopped working, caused by a blown fuse. The fuse box is located under the driver's seat. Just open the plastic cover to see the small squares arranged inside. The fuse for the cigarette lighter is usually around number 19. After locating it, replacement is easy—just remember to buy original specifications to avoid overheating risks. A blown fuse is typically due to excessive current, such as when multiple USB devices are plugged in simultaneously. It's recommended to use only one device at a time to prevent overload. When checking, use a magnifying glass to clearly see the numbers, and avoid pulling too hard to prevent damaging the slot. Always test the cigarette lighter before each trip to ensure it's reliable in emergencies. Such minor repairs can make the driving experience smoother—safety first.

Was this review help?
19
Share
Expand All
More Q&A

How to Check the 10-Digit Vehicle Code for Audi Cars?

The method to check the 10-digit vehicle code for Audi cars is as follows: When the vehicle is delivered by the 4S store, there is a transparent plastic card included in the accompanying folder. The back of this plastic card has a coating, and after scratching off the coating, you can see the 10-digit vehicle code. If this code is lost, you can request a replacement from the 4S store. Taking the Audi A6L 2021 40TFSI Luxury Elegance model as an example, this is a mid-to-large-sized car with dimensions of 5038mm in length, 1886mm in width, and 1475mm in height, with a wheelbase of 3024mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 140kW and a maximum torque of 320Nm. The engine reaches its maximum power at 4200 to 6000 rpm and is paired with a 7-speed dual-clutch transmission.
111
Share

Does a Faulty Turbocharger Bypass Valve Affect Engine Power?

A faulty turbocharger bypass valve will indeed affect engine power. If the bypass valve is broken, it will remain stuck in the open position. In this condition, even when exhaust pressure is insufficient, a portion of the exhaust gases will flow directly into the exhaust pipe without passing through the turbine. This leads to severe turbo lag and significantly impacts engine power output. The primary function of the turbocharger bypass valve is to automatically open during high-speed, high-load conditions, allowing some exhaust gases to bypass the turbine and enter the exhaust pipe directly. This reduces exhaust pressure and consequently lowers turbine speed. In essence, the turbocharger bypass valve primarily serves to regulate exhaust pressure.
102
Share

What is the fuel consumption of the Lincoln MKC?

The Lincoln MKC has 10 models. Among them, the 2019 2.0T AWD Zunyao Edition (National VI) and AWD Zunya Edition (National V) models, both equipped with a 253-horsepower engine, have an NEDC fuel consumption of 8.6L per 100km. The 2019 2.0T AWD Zunya Edition (National VI) models, both equipped with a 252-horsepower engine, have an NEDC fuel consumption of 9.4L per 100km. The AWD Luxury Smart Edition (6-seater) and AWD Luxury Smart Edition (7-seater) models, both equipped with a 252-horsepower engine, have an NEDC fuel consumption of 9.2L per 100km. The Dual Hybrid series 2.0TM AWD Premium Edition (7-seater) and AWD Premium Edition (6-seater) models, both equipped with a 190-horsepower engine, have an NEDC fuel consumption of 6.33L per 100km. The Dual Hybrid series 2.0TM FWD Premium Edition (7-seater) and FWD Premium Edition (6-seater) models, both equipped with a 190-horsepower engine, have an NEDC fuel consumption of 5.96L per 100km. The fuel tank capacity varies among different Lincoln MKC models. The distance that can be covered with a full tank of fuel is as follows: For models equipped with a 252-horsepower engine and NEDC fuel consumption of 8.6L, 9.4L, or 9.2L per 100km, the fuel tank capacity is 65L. The distance covered with a full tank is 65/8.6 100=756km; 65/9.4 100=691km; 65/9.2 100=707km. For models equipped with a 190-horsepower engine and NEDC fuel consumption of 6.33L or 5.96L per 100km, the fuel tank capacity is 58L. The distance covered with a full tank is 58/6.33 100=733km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, increases fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power, requiring more gasoline for combustion. Heavier cars also consume more fuel due to the greater driving torque needed. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily, requiring more gasoline for combustion, which increases fuel consumption. Additionally, in low temperatures, the engine computer controls higher RPMs to warm up the car, further increasing fuel consumption.
115
Share

How to Replace the Cabin Air Filter in a Haval H6?

The cabin air filter in a Haval H6 is located beneath the glove compartment on the passenger side. The replacement procedure is as follows: 1. First, open the glove compartment cover. 2. Locate the fixing buckle on the right side of the glove compartment and pull it outward firmly. 3. Remove the fixing buckle of the glove compartment cover to detach the glove compartment from the car body. 4. Use both hands to squeeze the sides of the glove compartment towards the center and remove it. 5. After removing the glove compartment, you will see the cabin air filter cover. Press the fixing buckles on both sides of the cover firmly to remove it. 6. Pull the old cabin air filter outward. 7. Install the new cabin air filter and reassemble everything in the reverse order of disassembly.
114
Share

Why Does the Cadillac Central Control Screen Dim?

There are generally several reasons why the Cadillac central control screen dims: 1. Reason one: The display screen is damaged and needs to be replaced. 2. Reason two: There might be a system issue, and restoring it could help. 3. Reason three: Poor contact in the wiring. 4. Reason four: Problems with the module circuit. There are several common solutions for a dim Cadillac central control screen: 1. Method one: Check if there is frost on the positive and negative terminals of the battery and clean the battery terminals. 2. Method two: Inspect the central control screen wiring harness, unplug and reconnect the harness connector, and use a hairdryer to blow air on it. 3. Method three: Restart the system. 4. Method four: Check if the remote control has power and ensure the lock actuator plug is not loose or detached. 5. Method five: Take it to a 4S shop for professional inspection and repair.
110
Share

What is the function of a water-methanol injection system?

The function of a water-methanol injection system is to protect turbocharged engines by providing cooling during boost, with extremely noticeable cooling effects. Here is additional information: 1. High intake air temperature: High intake air temperature is a common issue in turbocharged vehicles. Using a water-methanol injection system can effectively reduce the intake air temperature. Lowering the intake air temperature naturally increases the oxygen content in the air, which not only improves combustion efficiency, allowing gasoline to burn more completely, but also enables an appropriate increase in turbo pressure within a reasonable range. 2. Precautions: However, since the water-methanol injection system requires the use of industrial alcohol, it is essential to ensure leak-proof installation and proper routing of the tubing to prevent accidents. Additionally, after installing the water-methanol injection system, it is necessary to pair it with a modified engine control unit (ECU) to increase turbo pressure and fuel injection. Therefore, it is important to regularly monitor the water level in the reservoir.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.