What are the essential maintenance items for a car at 20,000 kilometers?

1 Answers
EvaFitz
07/30/25 7:12am
At 20,000 kilometers, a car requires maintenance on the engine oil, oil filter, air filter, brake pads, spark plugs, among others. In addition to these, there are several other items to consider: cleaning the throttle body and fuel injectors, performing a tire rotation and wheel balancing, replacing the cabin air filter, and cleaning the catalytic converter. Here is some additional information: Spark plugs: They are responsible for introducing high-voltage current into the cylinder in a gasoline engine's ignition system to generate a spark that ignites the combustible air-fuel mixture. If the vehicle experiences a lack of power, the spark plugs should be inspected. Additionally, during the 20,000-kilometer maintenance, it is important to check the thickness of the brake pads. If they are excessively worn, the brake pads should be replaced.
Was this review help?
15
1
Share
More Forum Discussions

What to Do When the Car Central Control Screen Frequently Restarts Automatically?

If the car central control screen keeps restarting, first check if any buttons were pressed incorrectly and perform a restart operation. Insufficient battery voltage or issues with the relay in the fuse box can also cause the central control screen to restart repeatedly, and replacement may be necessary if needed. Specific steps: 1. Restart: Use a paperclip or toothpick, something relatively hard, and press the RST hole (reset button) on the central control screen to restore it to its initial state. This is similar to restoring a computer system. 2. Visit a 4S Shop: If the central control screen keeps restarting due to insufficient battery voltage or relay issues in the fuse box, it is best to leave it to a 4S shop or auto repair shop for handling.
6
3
Share

Is There a Problem If the Car Shakes When Wading Through Water Without Stalling?

Generally speaking, if the car doesn't stall when wading through water, there should be no problem. Here are the specific details of the related content: 1. Inspection: If the water depth has already exceeded half of the tire, it may endanger the entire vehicle's electrical system and the onboard computer, so it's best to conduct an inspection. When just exiting the water area, apply the brakes slightly to dry the brake pads by friction. It's advisable to check whether the air filter, fuel filter, and battery have been submerged or dampened. 2. Reason: The exhaust has outward pressure, so under normal driving conditions, it won't backflow. The reason the car shakes when water enters the intake is that while the car is moving, the water is not flat but wavy, causing intermittent blockage and release, which leads to restricted air intake. After stalling, a self-check will reveal an intake fault, and the engine fault light will come on.
3
3
Share

What are the differences between FAW Sagitar 230 and 280?

The differences between Sagitar 230 and 280 lie in engine power, sealing gaskets, and external turbochargers. Here are the detailed explanations: Different engine power: Both Sagitar 230 and 280 models use a 1.4T turbocharged engine, but the 230 model's 1.4T is the low-power version, while the 280 model's 1.4T is the high-power version. Different sealing gaskets: The sealing gasket between the cylinder head and cylinder block is half a centimeter thick in the 280TSI, while it is only 2 millimeters thick in the 230TSI. Different external turbochargers: The metal pipes of the external turbochargers vary in thickness.
2
3
Share

What are the situations where Subject 2 fails?

Subject 2 failure situations are as follows: 1. Failing in reverse parking: Not following the prescribed route or sequence; vehicle body crossing the line or touching the line; incorrect operation leading to engine stalling. 2. Failing in hill start and stopping: After stopping, the front bumper of the vehicle is not aligned with the pole line, exceeding 50 cm forward or backward or less than 30 cm on either side; exceeding the specified time for starting. 3. Failing in parallel parking: After the vehicle is parked, the body crosses the line or touches the line; incorrect operation leading to engine stalling. 4. Failing in curve driving and right-angle turns: Wheels touching or crossing the road edge line; incorrect operation leading to engine stalling.
18
0
Share

How to Adjust the Headrest in a Mercedes-Benz?

The method to adjust the headrest in a Mercedes-Benz is: simply press the round button on the headrest. The headrest is designed to protect the safety of drivers and passengers in the event of a severe collision. Taking the Mercedes-Benz E-Class 260L as an example, it is a mid-to-large-sized 4-door 5-seater sedan with the following dimensions: length 5078mm, width 1860mm, height 1484mm, wheelbase 3079mm, and a fuel tank capacity of 66 liters. The Mercedes-Benz E-Class 260L is equipped with a 1.5T turbocharged engine, delivering a maximum power of 135 kilowatts at 5800 to 6100 rpm, and a maximum torque of 280 Newton-meters. It adopts a rear-wheel-drive layout, with both front and rear suspensions utilizing multi-link independent suspension systems.
6
1
Share

What is the difference between additional driving license and direct examination?

Both follow the same examination registration process, but there are differences. Below are the specific details: 1. Main differences: Additional driving license requires taking the exam twice and paying two fees. Directly applying for a B2 license does not require the C1 registration fee. Moreover, upgrading from C1 to B2 requires that the C1 license has been held for at least one year, with no more than 12 penalty points, no speeding, drunk driving, or other major violations before applying for the B2 upgrade. 2. Differences between C1 and B2: The minimum age for application differs—C1 applicants must be at least 18 years old, while B2 applicants must be at least 21. The types of vehicles allowed to drive also differ. C1 license holders can drive: C1 small cars, C2 small automatic transmission cars, C3 low-speed trucks, and C4 three-wheeled vehicles. 3. Examination location differences: C1 applicants can register for the exam at any local vehicle management office, while B2 applicants must register at the vehicle management office in their registered residence.
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.