···
Log in / Register

What are the dimensions of the Changan CS55 trunk?

4 Answers
DelMila
07/29/25 10:02am

Changan CS55 trunk dimensions: The depth is 865mm, the maximum width is 1330mm, and the height is 740mm. With the rear seats folded down, the length extends to 1730mm, an increase of 875mm compared to the original configuration. Below is some relevant information about the Changan CS55: 1. The Changan CS55 offers a wealth of interior storage spaces. In addition to the standard storage compartments on the door panels, there is an additional small compartment for miscellaneous small items. There is a storage compartment to the left of the steering wheel, suitable for cards and tickets. Above the center console, there is a sizable storage box, and to the right of the gearshift lever, there is a card slot with a large storage compartment in front. 2. The trunk volume of the Changan CS55 is quite substantial, making it more than adequate for daily use. It is worth mentioning that it comes with a spare tire cover, which helps keep the trunk clean and hygienic when storing the replaced old tire. The Changan CS55 does not have a dedicated switch for opening the trunk from inside the car; it can only be opened using the remote car key or from outside the vehicle. At the trunk lock, there is a square cover plate that, when removed, reveals a wire rope which can also be used to open the trunk, serving as an emergency escape switch with an icon indicating its function.

Was this review help?
13
5
Share
JackMarie
08/13/25 12:36pm

I'm quite familiar with the trunk dimensions of the Changan CS55. In its standard state, the capacity is approximately 480 liters, with specific measurements of 1100 mm in depth, 1000 mm in width, and 700 mm in height. It has no problem accommodating several large suitcases. As someone who loves road trips, I often use the trunk for tents, camping gear, and the like. The space layout is very well-organized, with a flat floor and no protrusions, making it extremely convenient for loading items. If the rear seats are folded down in a split ratio, the space can be expanded to over 1500 liters, easily accommodating a person lying down or transporting furniture. I find this design very practical for both city commuting and weekend outings, especially since there's a small storage compartment under the trunk floor for keeping small items tidy. Overall, as a compact SUV, its high trunk utility is a major highlight, which was a key factor for me when purchasing it.

Was this review help?
2
5
Share
Expand All
SanAlejandro
10/07/25 2:34am

I often take my family out in the Changan CS55, and trunk space is crucial for our small family. Its standard capacity is 480 liters, with dimensions of 1100mm in depth, 1000mm in width, and 700mm in height—plenty of room for a baby stroller, shopping bags, and daily errands without any hassle. If you fold down the rear seats, the space expands to a whopping 1500 liters, more than enough for luggage and tents during family road trips. I remember one trip to the beach where the trunk easily accommodated four or five large bags and a barbecue grill, with enough headroom to avoid bumps. The trunk also features handy hooks to secure bagged items and prevent them from shifting. Overall, its flexible space makes it a great fit for family needs, and its dimensions hold their own against joint-venture brands in the same class.

Was this review help?
13
4
Share
Expand All
MacSavannah
11/20/25 3:58am

Speaking of the Changan CS55's trunk, its official specification is a standard volume of 480 liters, which can expand to around 1500 liters with the rear seats folded down. The approximate dimensions are 1100mm in depth, 1000mm in width, and 700mm in height. I quite appreciate this layout—the wide opening makes loading and unloading items convenient, and the flat interior without intrusive wheel arches ensures good space utilization. I've tried fitting two 28-inch suitcases vertically without feeling cramped. Whether for daily use or long-distance travel, the trunk performs well, and adding a roof rack occasionally offers even more flexibility. In terms of size, it ranks above average among its SUV peers.

Was this review help?
20
5
Share
Expand All
More Forum Discussions

Which Generation is the 2021 Camry?

The 2021 Camry is the eighth-generation model. The design of the eighth-generation Camry is notably more youthful and stylish. Here are the relevant details: 1. Vehicle Condition: The eighth-generation Camry is equipped with two types of engines: a 2.0-liter naturally aspirated engine and a 2.5-liter naturally aspirated engine. There is also a hybrid version of the eighth-generation Camry, which uses a 2.5-liter naturally aspirated engine as well. 2. Vehicle Configuration: This engine features hybrid injection technology and is paired with a CVT transmission. The 2.5-liter naturally aspirated engine delivers a maximum power of 154 kW and a maximum torque of 250 Nm. The engine reaches its maximum power at 6,600 rpm and its maximum torque at 5,000 rpm.
13
2
Share

Is the Geely Vision X6 fuel consumption high?

Geely Vision X6 has moderate fuel consumption. The manual transmission model has a fuel consumption of 7.0 liters per 100 kilometers, while the automatic transmission model consumes 8.2 liters per 100 kilometers. Basic introduction to the Geely Vision X6: 1. Model introduction: The Geely Vision X6 is a compact SUV under the Geely brand, with a wheelbase of 2661 mm, and dimensions of 4546 mm in length, 1834 mm in width, and 1715 mm in height. 2. Engine introduction: The Geely Vision X6 is equipped with a 1.4-liter turbocharged engine. This 1.4-liter turbocharged engine delivers 141 horsepower and a maximum torque of 235 Nm. The engine reaches its maximum power at 5200 rpm and its maximum torque between 1600 to 4000 rpm. It features multi-point fuel injection technology and uses an aluminum cylinder head with a cast iron cylinder block.
19
3
Share

How to Maintain Your Car in Winter?

Winter car maintenance methods are introduced as follows: 1. Wiper Blades and Windshield: Due to weather conditions, wiper blades often freeze to the windshield in winter. Do not force them off; instead, turn on the car's air conditioning, set it to blow air towards the windshield to raise its temperature. This also helps check if the heating system is functioning properly. Regularly clean the heating system to ensure good air quality inside the car. 2. Body and Chassis: The car's exterior inevitably gets damaged while driving, or even when parked. In winter, with rain and snow, the car's exterior is prone to corrosion. Roads are often salted to quickly melt snow, and the tires can splash saltwater onto the chassis, causing rust. Therefore, before winter arrives, thoroughly inspect the car's body, promptly repair any scratches, and apply wax in early winter to protect the paint. A waxed body is less likely to get damp, and ice formation on the car's surface will be significantly reduced. Also, perform rust-proof maintenance on the vehicle's chassis to extend its lifespan.
2
1
Share

Where is the child lock on the Audi A4?

Audi A4 child lock is located above the rear door lock mechanisms. Additional information: 1. Use the mechanical key from the remote key to insert into the lock hole, then rotate the key in the direction of the arrow above the lock hole to activate the child lock. Rotate the key in the opposite direction of the arrow to deactivate the child lock function. When the child lock is activated, even if the central door lock is in the open state, the door cannot be opened from inside the vehicle and can only be opened from the outside door handle; 2. There is also a child safety feature at the central window control button on the driver's side door panel. Pressing this button will illuminate the indicator light in the button, deactivating the rear door window switch and preventing rear passengers from controlling the window operation via the rear door switches. When children are seated in the rear, the window lock switch should be pressed promptly.
14
0
Share

What Are the Reasons for the ETC Barrier Not Lifting When Entering the Highway?

Reasons for the ETC barrier not lifting when entering the highway include detachment or removal of the ETC device; ETC device malfunction; lane malfunction; pass card malfunction; or being blacklisted. In such cases, it is necessary to promptly contact on-site staff for assistance. How ETC Works: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to perform backend settlement processing with the bank. This allows vehicles to pass through highway or bridge toll stations without stopping while still paying the toll. ETC Usage Notes: The ETC transaction sensing range is 8 meters. When encountering a vehicle in front that has stopped, to prevent the front vehicle's ETC device from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters to avoid automatic sensing and payment for the front vehicle. The ETC lane recognition speed is 20 km/h. If the vehicle speed is too fast, the vehicle device information cannot be read, which will also result in payment failure. Unauthorized removal or movement of the OBU device, detachment or loosening of the ETC electronic tag, etc., will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. Non-deliberate loosening or detachment only requires reactivation. When using a debit card linked to ETC, insufficient balance will also cause payment failure. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Excessive thickness of the car windshield can cause poor sensing. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.
4
5
Share

Do You Need to Replace Coolant in Hot Weather?

Hot weather does not necessitate coolant replacement, as coolant change is not related to weather conditions. For vehicles that operate for extended periods, such as taxis, high-quality coolant should generally be replaced annually. Vehicles with shorter operating hours can have their coolant replaced every two years or every 30,000 kilometers. How to Replace Coolant: Before completely replacing the coolant, conduct a thorough inspection to check for any signs of leaks or cracks in the pipelines, with a particular focus on the five-way hose. Coolant flows through the five-way hose and is then distributed to different parts of the car to function. If there are any signs of coolant leakage in this area, replace the hose or resecure the connection as needed. Drain the old coolant and then flush the fluid channels with clean water. Add clean water to the coolant reservoir and continue to fill it until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir will have a faint pink tint. Continue adding clean water until the drained water runs clear. Note: Remember to remove the heater hose and drain all water from the heater core. Approximately one hour after draining, add new coolant through the radiator hose. Then, pour another container of coolant into the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As the cooling system expels some air, the coolant level will drop slightly. Top up the coolant until it reaches the "MAXT" mark on the reservoir.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.