What are the dimensions for the reverse parking test in Driving License Test Subject 2 for small cars?

[TuckerFitz]

The standard dimensions for the reverse parking garage are as follows: The garage length is 5.25 meters, and the width is 2.3 meters. The total length of the road is 15.9 meters, with a single side length of 6.8 meters and a width of 5.8 meters. Evaluation criteria for reverse parking: failing to follow the prescribed route or sequence results in disqualification; the vehicle body crossing the line results in disqualification; failing to fully enter the garage results in disqualification; stopping midway results in disqualification; exceeding 4 minutes results in disqualification. Reverse parking mnemonic: Reverse parking isn't hard to do, fasten seatbelt, shift gear, left signal flash. Press clutch, release handbrake, slowly lift clutch to start gently. Watch the right line to adjust the car body, align the left mirror's vertical gap with the right line. Stop when the front line aligns with your shoulder, shift to reverse gear and release the clutch. When the left mirror covers the corner of the horizontal line, turn the steering wheel fully to the right. Watch the left mirror for the garage line, at a 30-degree angle, turn back one round, wait until the car is parallel to the line, straighten the steering wheel by turning two full rounds. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit the garage, turn the steering wheel fully to the left when the car touches the line. Stop when the car hood covers the line, keep the steering wheel unchanged and reverse the car. Watch the right mirror for the garage line, at a 30-degree angle, turn back one round, wait until the car is parallel to the line, straighten the steering wheel by turning two full rounds. When the left mirror covers the front corner of the garage, press the clutch and brake. Shift to first gear to exit the garage, turn the steering wheel fully to the right when the car touches the line. Stop when the car hood covers the line, adjust the car body skillfully. The new garage has no poles to reference, only markings on the ground. The garage length is much shorter compared to the current one, just enough for a car to fully park inside. The process involves reversing into the garage from the right, then driving out to turn left, reversing back in, and finally driving out to return to the starting point. This process is much simpler, eliminating the current test step of moving the car within the garage.

[DelMadelyn]

The dimensions for reverse parking have clear standards: the parking space is 5.25 meters long and 2.31 meters wide, which is similar to real-life scenarios. The lane width is about 7 meters, making this design quite challenging—only a complete stop inside the space counts as a pass. When practicing, remember to keep the distance between the corner of the space and your car around 30 cm; too close and you risk crossing the line. Rearview mirrors are crucial—turn the wheel quickly once you see the corner. It’s recommended to practice often to develop a feel for the car, especially for shorter drivers who should adjust their seat position to avoid obstructing their view. Sometimes the lines on the test ground may have faded paint, so familiarize yourself with the site in advance to stay calm.

[OAdam]

During my driving test preparation, the instructor repeatedly emphasized the dimensions for reverse parking: the parking space is 5.25 meters long and 2.31 meters wide. This is slightly narrower than standard parking spots, requiring precise control. The lane is about 7 meters wide, and it's crucial to memorize the full steering wheel angle when reversing—I kept crossing the right line at first. The key is to watch the rearview mirror and start straightening the wheels when the car body is 30 cm away from the corner of the parking space. Later, I realized that if the rear wheels crossed the line, it was mostly due to turning the steering wheel too late. Don’t rely solely on memorizing fixed reference points; understanding the changes in wheel trajectory is essential. There might be differences between the driving school car and the test car, so taking a test drive beforehand is important.

[LaArthur]

The parking bay dimensions are 5.25 meters long and 2.31 meters wide, with an exam lane width of 7 meters. This specification is well-designed, simulating real parking spaces while testing driving skills. During practice, focus on the corner positions - turn when you see the corner in the rearview mirror, maintaining about 30 cm between the vehicle body and the bay edge. Don't steer too sharply; speed control is more important than specific reference points. Exam vehicles sometimes have differently angled rearview mirrors, so remember to adjust them first. In northern winters, markings can be covered by snow, while southern rainy seasons bring strong reflections - both require prior adaptation to the test site conditions.

[PeytonLynn]

When practicing reverse parking, the parking space is 5.25 meters long and 2.31 meters wide, with a 7-meter-wide lane. From my failures, I learned that hitting the lines often happens because of turning the wheel too early. Now, when teaching family members to drive, I advise them to wait until the rear wheels pass the corner of the parking space before turning the wheel, which is safer. Just make sure the car body is parallel to the yellow line in the rearview mirror. On the exam day, check the actual dimensions on-site, as some test centers reduce the parking space width to 2.25 meters. Using the raised point on the wiper to align with the edge line is also a good method, but don’t rely solely on reference points. Keeping the car body straight is much more crucial than the speed of the vehicle.

[MacMargaret]

The standard dimensions for reverse parking are 5.25 meters in length and 2.31 meters in width, with a lane width of approximately 7 meters. The core of this exercise is spatial awareness, as the garage is intentionally designed narrower than a typical home parking space. I've seen many beginners misjudge distances, such as mistakenly thinking the corner of the garage is far away when it's clearly visible in the rearview mirror. The key is to practice controlling the trajectory of the rear wheels; maintaining a 30 cm gap between the wheel and the garage corner in the rearview mirror yields the highest success rate. If the markings are hard to see in the rain, use the door handle as a reference, and avoid gripping the steering wheel too tightly—staying relaxed makes minor adjustments easier.