···
Log in / Register

What are the differences between the Ninebot e80c and e100?

5Answers
Alexandra
09/08/2025

The differences between the Ninebot e80c and e100 lie in their top speed, range, and motor. The specific parameters are as follows: Top speed: The Ninebot E80C has a top speed of 51 km/h, while the Ninebot E100 has a top speed of 60-65 km/h. Range: The Ninebot E80C has a range of 90 km, while the Ninebot E100 has a range of 100-200 km. Range can also be referred to as endurance, which indicates the total distance a vehicle such as a car or ship can travel continuously with maximum fuel reserves. Motor: The Ninebot E80C is equipped with a 1.2 kW motor and a 72V20ah lithium battery, while the Ninebot E100 has a 1.8 kW motor and supports dual or triple batteries.

Was this review help?
10
4
Share
ElizabethMarie
09/20/2025

As an urban commuter, I find the speed difference between the Ninebot e80c and e100 quite noticeable. The e80c averages around 25 km/h and struggles a bit on inclines, while the e100 easily hits over 30 km/h, making slopes no problem at all. In terms of range, the e80c runs about 30 km on a full charge before it's pretty much done, whereas the e100 can last up to 50 km, saving both money and hassle. Price-wise, the e80c is cheaper, costing a few hundred yuan less, making it suitable for students or short-distance use. Feature-wise, the e100 supports app controls for adjusting lights and locking the scooter, which is cooler to play with. For daily maintenance, both have solid tires that are less prone to damage, but the e100 has better suspension, making it steadier on bumpy roads. Overall, if you're after performance and range, go for the e100; if you're on a tight budget, the e80c is a good pick—both work well for city travel.

Was this review help?
20
0
Share
Expand All
LeGemma
11/02/2025

As a homemaker, I prioritize the durability and cost-effectiveness of scooters. The E80C and E100 look similar in appearance, but the E100 has a much longer battery life, capable of running over 40 kilometers on a single charge, making it more convenient for school runs or grocery shopping. The E80C, on the other hand, has a range of less than 30 kilometers, requiring frequent charging, which can be annoying. Price-wise, the E80C is cheaper, but the E100 is worth the extra cost with its faster brake response, making it ideal for safety-first situations. In terms of motor power, the E100 handles steep slopes more easily, ensuring no delays on the road. Maintenance is also straightforward, with both models featuring durable tires. In summary, if you frequently travel long distances or carry loads, the E100 is the better choice; for short-distance use, the E80C offers good value.

Was this review help?
9
1
Share
Expand All
DiNolan
12/16/2025

From a safety perspective, the key comparison between the e100 and e80c lies in braking and stability. Having used both models for years, the e100 features disc brakes, providing reliable emergency stops, while the e80c uses drum brakes with slightly slower response. In terms of motor power, the higher-spec e100 handles inclines more effortlessly, reducing the risk of skidding. For range, the e100 covers longer distances without frequent charging. Although both share the same tires, the e100's superior suspension absorbs bumps better, enhancing safety by minimizing jolts. For those prioritizing stability, the e100 is the recommended choice.

Was this review help?
14
4
Share
Expand All
LillianAnn
02/06/2026

As a tech enthusiast, the e100's advantage lies in its smart features. It supports APP connectivity for customized settings, such as speed reminders and anti-theft locks, while the e80c relies mainly on handlebar controls. In terms of motor performance, the e100 boasts higher power and faster acceleration, easily exceeding 30 km/h, whereas the e80c is limited to 25 km/h. Comparing range, the e100's 50 km battery lasts longer, while the e80c runs out of steam at 30 km. Though slightly more expensive, the smart features make it worth the price. Ideal for those who love exploring new functionalities.

Was this review help?
18
5
Share
Expand All
More Q&A

How to Check the Date of Headlights on a Used Car?

To read the production date of the headlights on a used car, you can check the stamp on the headlights, which is usually located at the bottom left or bottom right corner of the headlight. Below are specific details about replacing headlights: 1. Choosing Headlights: When selecting new headlights, you should choose the appropriate bulb model based on your car, while also considering factors such as annual inspections and whether the battery can handle it. It is best to opt for original equipment manufacturer (OEM) headlights. 2. Installation and Removal: Avoid touching the glass shell of the bulb directly with your hands during installation or removal. When installing the bulb, do not touch the glass part with your fingers, as even the slightest oil residue on the glass can shorten the bulb's lifespan and pose a risk of cracking with prolonged use. 3. Light Intensity: When replacing the bulb, compare the light intensity and adjust it properly in time, as adjusting it later can be time-consuming and labor-intensive.
8
3
Share

How to Adjust When the Car Body is Not Straight During Curb Parking?

Practice makes perfect. Here are the adjustment methods for an unaligned car body during curb parking: Use the wiper to judge whether the car front is straight—no problem. By comparing the wiper with road markings, maintain a fixed distance or angle while driving. If it deviates, it indicates the car front is not straight. Additionally, depending on each person's height difference, other parts of the car front can also serve as reference points, such as the roof corner or reinforcement ribs. Actually, the most crucial point to ensure the car front is straight is to learn to look into the distance, observing distant traffic lights, the rear of the car ahead, lane markings, etc., to see if the car body is straight. When parking at the curb, after selecting the parking position, turn the steering wheel to the right. At this time, the steering angle should not be too large. When the center of the car front is about to align with the right edge line, immediately turn the steering wheel back to the left. The steering wheel turning range can be slightly larger at this point.
10
5
Share

What does a yellow light with an 'a' inside a circle on the dashboard mean?

The reason for a yellow light with an 'a' inside a circle appearing on the dashboard is that the engine auto start-stop system is active. At this time, the car often shuts off, and releasing the brake will automatically restart the engine, allowing normal driving to resume. The conditions for auto start-stop activation include: engine coolant temperature being too low after a cold start, typically below 70 degrees Celsius; outside temperature below 5 degrees Celsius, or cabin temperature below 20 degrees Celsius when heating is on; insufficient battery charge, usually below 60%; steering wheel angle exceeding 30 degrees; front seat belts not fastened; and parking on a slope. The auto start-stop function activates automatically each time the car is started, provided the above conditions are met, and the vehicle speed exceeds 3 km/h for about 4 seconds, without requiring any additional action from the driver. However, the auto start-stop function must be turned off in the following situations: during water wading; when driving on a slope (most cars are usually set to automatically disable it in this case); and when refueling, the engine must be completely turned off and power must be cut before refueling.
16
1
Share

What is the working principle of an evaporator?

The working principle of an automobile evaporator: The liquid refrigerant enters through the feed port, while the heating steam heats the heating tube bundle inside the heating chamber. The thicker tube in the middle of the heating chamber, due to its smaller heating area compared to the heating tube bundle, causes the refrigerant vaporized by the heating tube bundle to rise and enter the evaporation chamber. Below are related introductions: 1. Definition of the evaporator: The evaporator is a device used to heat the refrigerant and absorb heat from the external environment, mainly composed of a heating chamber and an evaporation chamber. 2. Application in thermal units: In fresh air heat exchange units and fan coil units, the evaporator primarily provides chilled water during the cooling process and heated refrigerant during the heating process. 3. Application in ground source heat pump systems: Its role in ground source heat pump systems is opposite to that of the condenser. During the heating process of the ground source heat pump unit, the evaporator acts as a ground source side device, heating the circulating water on the ground source side. The heated water is then transferred to the condenser through heat exchange in the unit, where the heat from the hot water is discharged by the condenser.
18
5
Share

What do 4L and 4H mean in 4WD vehicles?

4H and 4L are two modes available in four-wheel-drive vehicles. 4H stands for four-wheel-drive high-speed mode, while 4L stands for four-wheel-drive low-speed mode. These two drive modes have certain differences in controlling the transmission and are used in different scenarios. Properly utilizing the four-wheel-drive modes according to terrain can not only improve the vehicle's off-road capability but also reduce fuel consumption to some extent. Usage scenarios for 4H and 4L modes: 1. Slippery surfaces: If driving on snow or slippery roads, the 4H mode is very suitable, as it ensures sufficient drive wheels while avoiding excessive driving force that could cause wheel slip. 2. Climbing: Due to its strong driving force, the 4L mode can be used when climbing slopes or during off-road driving, maximizing the vehicle's power. 3. High-speed driving: High-speed four-wheel drive is not suitable for highway driving. For part-time four-wheel-drive vehicles, dry paved roads are not suitable for 4H or 4L modes; only the 2H mode should be selected.
11
3
Share

What documents are needed for car transfer?

The seller needs to prepare the original ID card of the vehicle owner, vehicle registration certificate, vehicle license, original purchase invoice or transfer invoice of the vehicle, and the buyer needs to provide the original ID card of the buyer. Some regions also require a "vehicle purchase quota". The procedures for car transfer are as follows: 1. Obtain the form: obtain and fill out a copy of the motor vehicle change, transfer, modification, suspension, or scrapping approval form. 2. Stamp: affix the same seal as the original registration, and private vehicles must submit the owner's ID card for verification. 3. Review: go to the vehicle management section of the traffic police detachment and submit the documents to the registration acceptance counter for review by the handling officer. 4. Inspection: vehicles that meet the transfer conditions will be sent to the motor vehicle inspection counter for inspection and confirmation. 5. Payment: after passing the inspection, for transfers or changes within the same county or city, go directly to the license plate management counter to wait for notification and pay the fee. 6. Tax payment: the transaction tax is issued by the used car trading center and is charged at 1.48% of the vehicle's estimated value.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.