···
Log in / Register

What are the differences between the Binyue and Binyue Pro?

6Answers
BrynleeAnn
07/29/2025, 05:36:53 PM

The differences between the Binyue Pro and Binyue are: 1. Different engines: The Binyue Pro has two powertrain versions, 1.4t and 1.5t, of which the 1.4t is a four-cylinder engine, while the Binyue has 1.0t and 1.5t engines, both of which are three-cylinder; 2. Different tire pressure displays: The Binyue Pro comes standard with a tire pressure display across all trims, while the Binyue requires mid-range or higher trims to have a tire pressure display; 3. Different sunroofs: The Pro version comes standard with a sunroof. Additional details: 1. The Binyue PRO overall continues the styling and design of the current model, adopting the design language of the Time Racing Aesthetics concept. 2. In terms of specific details, the new car features a sharp front face and comes with an exterior kit, making it more dynamic compared to the current Binyue. Additionally, the new car also adopts a red and black dual-tone body design.

Was this review help?
111
Share
SanGabriella
08/15/2025, 04:44:14 PM

I previously drove the Binyue, and later test drove the Binyue PRO. The main differences lie in the driving experience and daily practicality. The PRO version uses a more efficient 1.5T engine, providing smoother power output and a stronger acceleration feel, especially in congested urban areas where the jerkiness is reduced. In terms of interior, the PRO upgraded the seat materials, making long drives less tiring, and the fuel consumption dropped from around 7L/100km to about 6.5L/100km, saving a lot on fuel costs. The PRO also added keyless entry and automatic parking, making operations much more convenient. Overall, the PRO leans more towards comfort and energy efficiency, making it suitable for daily commuters like me—it doesn’t cause fatigue even after long drives. Although it’s 10,000 to 20,000 yuan more expensive, it’s much more cost-effective in the long run.

Was this review help?
5
Share
Expand All
SimonLynn
10/17/2025, 12:44:59 AM

As someone who enjoys studying automotive details, I've noticed significant differences in technical configurations between the Binyue and its PRO version. The PRO upgrade includes an enhanced intelligent system, featuring a full LCD instrument cluster and a 10-inch central control screen that supports voice control for air conditioning and navigation, with a more intuitive operating interface. In terms of powertrain, the PRO version's transmission has been optimized for better tuning, offering quicker shift responses, and the chassis suspension has been reinforced to reduce vibrations when going over speed bumps. Safety-wise, it adds blind-spot monitoring and lane-keeping assist, making highway driving more reassuring. These upgrades represent tangible improvements that elevate the PRO version's driving enjoyment to a higher level.

Was this review help?
5
Share
Expand All
SanAlana
11/30/2025, 12:28:39 AM

For young car owners, the Bin Yue PRO is more fun because it incorporates many fashionable elements. Externally, the PRO features more dazzling LED headlights and sporty wheel designs, along with trendier color options that make it look cool in the eyes of friends. The interior boasts a strong sense of technology, such as faster-responsive mobile connectivity that can directly project navigation onto the screen. There's not much change in power, but the acceleration feels more direct. The price difference is around ten thousand yuan, making the PRO a better value, especially since looks and technology are what we care about most.

Was this review help?
5
Share
Expand All
DelAmy
01/20/2026, 01:52:18 AM

From a family perspective, the Bin Yue PRO has obvious advantages in space and comfort. The rear seats are more spacious for three people, and the trunk capacity is slightly larger, making it easier to store bulky luggage. The PRO seats have added memory function, making long-distance rides much more comfortable. The safety configuration has been upgraded, such as the addition of an automatic braking system, providing more peace of mind when traveling with family. Noise control is also better, making the cabin much quieter. Compared to the base version, these improvements in the PRO are highly practical for families, making it suitable for picking up kids or going on road trips.

Was this review help?
15
Share
Expand All
SanVictoria
04/16/2026, 02:36:13 AM

From a budget perspective, the BinYue PRO is slightly more expensive but offers better value for money. The PRO version adds convenient features like remote start and wireless charging, saving time and effort in daily use. Maintenance costs are relatively lower due to the more durable new engine and better fuel efficiency. Over the long term, the savings on fuel and higher resale value make the PRO version more economical than the base model. If money is tight, the base model is sufficient, but the additional investment in the PRO version pays off significantly in terms of lifestyle convenience.

Was this review help?
9
Share
Expand All
More Q&A

Is the Range Rover Sport a body-on-frame vehicle?

Range Rover Sport is a body-on-frame vehicle. Body-on-frame structure: In a body-on-frame design, the body is flexibly connected to the frame through rubber pads or springs. The frame serves as the foundation supporting the entire vehicle and bears various loads from installed assemblies. The body only carries the weight and inertial forces of passengers and cargo, with no consideration given to the body's auxiliary role in load-bearing during frame design. Structural characteristics: The frame spans the vehicle's full length, functioning independently as a skeleton structure. Constructed from thick welded steel plates, chassis components (engine, suspension, etc.) are mounted on the frame. The sheet metal body is then attached to the frame via rubber bushings.
119
Share

Does Changing the Dogbone Affect the Suspension?

Changing the dogbone does not affect the suspension. Lifting the Rear of the Vehicle: Use tools to lift the rear of the vehicle. If using a jack, place it under the engine's rear center of gravity to raise the rear wheels off the ground. Removing the OEM Fixing Plate: Remove the OEM fixing plate and install the DIMOTIV lowering kit fixing plate using the original screws and tighten the OEM nuts. Loosening the Triple Clamp: Loosen the left and right screws of the front fork's triple clamp to raise the fork legs by 30mm (the amount the vehicle is lowered, the fork must be adjusted accordingly). Adjust the damping knob to a softer setting. This method ensures both front and rear lowering effects while preventing center of gravity displacement.
106
Share

What are the reasons for a sedan making noise when braking?

The reasons for a sedan making noise when braking are: 1. Rust on the brake disc or brake pads; 2. The sedan has just had new brake pads installed; 3. Excessive wear on the brake disc and brake pads; 4. Assembly issues, such as incorrect brake pad model. The solutions for a sedan making noise when braking include: 1. Applying butter or specialized lubricant to the connection between the brake pads and brake caliper; 2. Regularly inspecting and replacing the brake disc and brake pads; 3. Reinstalling the brake pads. Braking, also known as deceleration, refers to the action of stopping or reducing the speed of a moving motor vehicle or other transportation machinery, which is divided into drum brakes and disc brakes.
105
Share

What are the differences between Excelle and Excelle GT?

The differences between Excelle and Excelle GT are: 1. Different body dimensions: Excelle measures 4468mm in length, 1765mm in width, and 1469mm in height, with a wheelbase of 2611mm; Excelle GT measures 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. 2. Different fuel tank capacities: Excelle has a 40-liter fuel tank, while Excelle GT has a 44-liter fuel tank. Both Excelle and Excelle GT feature a MacPherson strut front suspension, electric power steering, a unibody structure, and a compact spare tire.
108
Share

What are the differences between the Shelby GTE and the Mustang?

The differences between the Shelby GTE and the Mustang are: 1. Different power outputs: The Shelby GTE's engine has a maximum horsepower of 299 hp and a maximum torque of 434 Nm; the Mustang's engine has a maximum horsepower of 338 hp and a maximum torque of 525 Nm. 2. Different fuel tank capacities: The Shelby GTE has a fuel tank capacity of 59 liters; the Mustang has a fuel tank capacity of 58.9 liters. Both the Shelby GTE and the Mustang are equipped with a 2.3T engine, featuring a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power steering, and the body structure is a unibody design.
102
Share

Which is better, NIO or Tesla?

Both NIO and Tesla have their own advantages, depending on personal preference. Here is some information about the warranty period for the first owner: Sales: When selling cars, 4S stores may offer some discounts or privileges to owners in terms of maintenance and repairs, which can help reduce the cost of car ownership to some extent. For example, the first owners of NIO's ES6 and ES8 receive a lifetime free warranty and enjoy the convenience of lifetime free battery swapping services. Conditions: The conditions include: being the first owner; the vehicle must be maintained at a 4S store for its entire lifetime; only covering the three major components, damaged parts of the vehicle are not covered, and the lifetime warranty will be voided if major components are replaced. A lifetime warranty is not the same as a vehicle warranty.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.