···
Log in / Register

What are the differences between the 5-seater and 7-seater versions of the new Edge?

6Answers
LouisRose
09/04/2025, 11:02:04 PM

The differences between the 5-seater and 7-seater versions of the new Edge lie in their interior seating arrangements: the 5-seater model features a 2+3 seating layout, while the 7-seater model has a 2+3+2 layout. The 7-seater version is 98 kg heavier than the 5-seater version. The exterior design of the new Edge exudes a commanding presence that perfectly matches its class. The front of the new Edge adopts a hexagonal grille design with chrome trim, and full LED headlights are standard across all models. The new Edge is equipped with a 12.8-inch vertical touchscreen, which harmonizes well with the surrounding air vents, eliminating any sense of abruptness and significantly enhancing the interior's premium feel.

Was this review help?
107
Share
StNadia
09/16/2025, 11:41:34 PM

I’ve also been looking at this car recently, and the difference between the 5-seater and 7-seater is quite noticeable. The most obvious distinction is the number of seats—the 7-seater version has an extra row of seats, which can be folded down when not in use. If you have a larger family and often travel with elderly parents or kids, the 7-seater is definitely more practical. However, the third-row space is relatively cramped, and taller passengers might find long trips less comfortable. Additionally, there’s a difference in trunk space: the 5-seater has a huge trunk that can easily fit a stroller and luggage, while the 7-seater leaves very little space when the third row is up, though it’s similar to the 5-seater when folded. If you mostly drive in the city and rarely travel with a full car, the 5-seater offers better value for money and a more spacious, comfortable ride.

Was this review help?
10
Share
Expand All
DelMiguel
10/31/2025, 12:12:39 AM

The design concepts of these two models are completely different. The 7-seater version is mainly aimed at larger families, featuring a foldable armrest in the middle of the second row for easier access to the third row, but the middle seat can be less comfortable when carrying five passengers. The 5-seater version doesn't have this issue, with three passengers sitting comfortably side by side in the rear. In terms of trunk space, the 7-seater's third-row seats are more complicated to fold and unfold, while the 5-seater's trunk is straightforward and more spacious, making it much easier to load large items. Price-wise, the 7-seater is more expensive, heavier, and likely to have higher fuel consumption, with different annual inspection policies. It's recommended to choose based on your usage scenario: if you frequently travel with a full load every week, the 7-seater is suitable; otherwise, the more spacious 5-seater would be a better choice.

Was this review help?
5
Share
Expand All
MacJosephine
12/13/2025, 11:20:49 PM

There are significant differences in space layout between 5-seater and 7-seater models. 7-seater vehicles are designed with an additional set of stowable seats, usually folded under the cabin floor. When fully occupied with 7 passengers, the third-row space is very limited, with knees easily touching the seatbacks, and the smaller windows can feel a bit claustrophobic. 5-seater models don't have this issue, offering more generous headroom in the rear seats. In daily use, deploying or stowing the seats in a 7-seater requires extra steps, while a 5-seater allows direct loading of large items. If you occasionally need to transport more people, a 7-seater does offer more flexibility; but for individuals or small families, a 5-seater is completely sufficient, with a trunk that can even accommodate surfboards or tents.

Was this review help?
19
Share
Expand All
DiFinley
02/03/2026, 12:22:07 AM

The differences mainly lie in space utilization and positioning. The 7-seater version is designed for both commuting and family trips, but the third row is essentially for emergency use, with limited legroom that barely accommodates adults. The 5-seater version is tailored for daily commuting, offering spacious and comfortable second-row seating. The practicality of the trunk also varies significantly: the 7-seater can hardly fit any luggage when the seats are not folded, and while folding them increases depth, it reduces height. In contrast, the 5-seater not only has a larger capacity but can also vertically accommodate items like strollers or golf bags. Driving experience differs too, with the 7-seater feeling heavier when fully loaded. When deciding which to buy, consider whether you frequently need to handle full-capacity situations or prioritize daily convenience more.

Was this review help?
20
Share
Expand All
EvaLee
04/28/2026, 04:56:36 PM

The difference in seat count conceals numerous design variations. The 7-seater version features adjusted chassis structure to accommodate the third row, resulting in significantly compressed cabin space. When carrying five to six passengers, the 5-seater offers noticeably more spacious second-row legroom. To prioritize third-row accessibility, the 7-seater's second-row cushions are shortened. In real-world driving, the 5-seater feels more agile with a tighter turning radius, while the 7-seater excels in long-distance travel, especially with rear ISOFIX child seat anchors. Even the tailgate opening height differs - the 7-seater requires higher clearance to prevent head bumps. For frequent business transport, choose the 7-seater; for personal commuting, the 5-seater proves more practical.

Was this review help?
4
Share
Expand All
More Q&A

can you pay cash for enterprise rental car

Yes, you can pay with cash for an Enterprise rental car, but it is not a straightforward process and comes with significant requirements. Enterprise primarily operates on a "credit-check" model, meaning they prefer a credit card to secure the rental. If you plan to use cash or a debit card, you must meet specific criteria, primarily involving a thorough pre-approval check and a substantial security deposit. The ability to pay with cash is typically only available at the end of your rental period. You will still be required to present a valid debit or credit card at the time of pickup to cover the security hold and any potential incidental charges. Key Requirements for Renting with Cash/Debit: Proof of Return Travel: A round-trip airline, cruise, or train ticket is often required. Proof of Identity: A valid driver's license, which must be presented for the required minimum period (e.g., 1-2 years). Age Requirements: Renters are usually required to be at least 25 years old, though this can vary by location. Credit Check: Enterprise will perform a credit check using the information on your debit card. Additional Documentation: You may need to provide recent utility bills or pay stubs as proof of residence. The security deposit, also known as a "hold," is a crucial factor. This amount, which can be several hundred dollars, is placed on the card you present and is not released until after you return the car. The table below outlines typical security hold amounts for different vehicle classes, though these figures can vary by location and season. Vehicle Class Typical Security Deposit (Hold) Economy/Compact $200 - $300 Intermediate/Standard $250 - $350 Full-size/Premium $300 - $500 SUV/Minivan $400 - $600 Luxury/Sports Car $500 - $750+ It is absolutely essential to call the specific Enterprise branch where you intend to rent well in advance. Corporate-owned locations may have different policies than franchisee-owned locations. Confirm their exact requirements for a cash/debit rental to avoid being turned away at the counter.
116
Share

can you put a remote start on a hybrid car

Yes, you can absolutely install a remote start on a hybrid car. In fact, it's often a straightforward process, though the best method depends on your specific vehicle and your comfort level with aftermarket modifications. The key is to use a system designed to work seamlessly with your hybrid's complex computer network, ensuring it doesn't interfere with the high-voltage battery system or the start-stop functionality. The most reliable approach is a professional installation of a model-specific kit. The primary methods are an aftermarket remote start system or a factory-installed upgrade . Aftermarket systems, installed by a professional, are the most common solution. A reputable installer will use a module that integrates with your car's CAN bus (Controller Area Network), the internal network that manages vehicle electronics. This is crucial for hybrids to avoid triggering error codes. Some systems can even be controlled via a smartphone app. For many, a dealer-installed accessory is the safest bet. These are OEM (Original Equipment Manufacturer) parts designed specifically for your model, guaranteeing compatibility and preserving your factory warranty. While often more expensive, they offer peace of mind. Installation Method Typical Cost Range Key Pros Key Cons Professional Aftermarket $200 - $500+ Wide compatibility, often more feature-rich (longer range, smartphone control). Requires a skilled installer; potential warranty concerns if not done correctly. Dealer/OEM Accessory $400 - $700+ Guaranteed compatibility, preserves factory warranty, integrates with existing key fob. Higher cost, may have fewer advanced features than premium aftermarket options. DIY Kit $100 - $300 Lowest cost. High risk of damaging sensitive electronics; very complex; not recommended for hybrids. Before proceeding, confirm that the chosen system is explicitly compatible with your hybrid's make, model, and year. A proper installation will allow you to start the car remotely, which will activate the climate control using battery power initially, a major advantage for pre-heating or cooling the cabin efficiently without immediately turning on the gasoline engine.
118
Share

can you push start a manual car in reverse

Yes, you can push start a manual car in reverse gear, and in some specific situations, it might even be easier than using a forward gear. The core principle of push starting, or "bump starting," is to use the car's momentum to turn the engine over via the transmission, bypassing a dead starter motor. This works in any gear that connects the wheels to the engine. Reverse gear is typically the highest numerical ratio in a car's transmission, meaning it provides the most torque multiplication. In practical terms, this can make the engine turn over more easily with less vehicle speed. You might need only a very slow walking pace to get the engine to crank. This can be a significant advantage if you're on a slight incline or have limited space to push the car. However, there are important drawbacks. Visibility while driving in reverse is notoriously poor, making it dangerous to attempt if you need to travel any distance. The maneuver should only be done in a completely safe, empty area like a large, flat parking lot. Furthermore, some modern vehicles with complex anti-theft systems or specific electronic dependencies might not start using this method, regardless of the gear selected. Here is a comparison of push-starting in reverse versus a forward gear like second: Factor Push-Starting in Reverse Push-Starting in 2nd Gear Ease of Cranking High torque; engine turns over very easily at low speed. Requires more vehicle speed to achieve sufficient engine RPM. Required Distance Shorter distance needed due to high gear ratio. Longer pushing distance typically required. Safety & Control Poor visibility; difficult to steer precisely; high risk. Better forward visibility and vehicle control. Ideal Scenario A few feet of clear, flat space directly behind the car. A clear, gentle downhill slope. Transmission Stress Generally safe for the drivetrain if the clutch is engaged smoothly. Generally safe; the standard method for most drivers. The safest and most recommended method remains push starting in second gear. It offers a better balance of control and effectiveness. Reverse gear should be considered a last-resort option for when you are physically blocked in and can only roll backward a few feet.
105
Share

can you pay for a rental car with afterpay

No, you generally cannot use Afterpay to directly pay for a rental car at the counter. Major rental car companies like Enterprise, Hertz, and Avis require a primary payment method linked to your name—typically a credit or debit card—to secure the reservation and cover any potential incidentals. Afterpay is designed for retail product purchases, not for services where ongoing financial responsibility is needed, like a car rental. The core issue is the rental company's need for a security hold (also called an authorization hold). When you pick up the car, the company places a hold on your card for several hundred dollars above the rental cost. This hold ensures funds are available to cover additional charges like fuel, tolls, or damage. Afterpay's installment model cannot facilitate this type of dynamic, temporary hold. However, there are indirect workarounds. Some services allow you to purchase rental car vouchers or gift cards through third-party platforms that might accept Afterpay. For example, you could buy a Hertz gift card from a retailer like Walmart.com using Afterpay, and then use that gift card to pay for the rental itself. Crucially, even if you use a gift card for the base rate, you will still need a valid credit or debit card in your name at the counter to cover the security deposit. The card must have sufficient available credit for the hold amount. Your best bet is to check the specific policies of your chosen rental company. The table below outlines the standard payment requirements for major US rental agencies. Rental Company Accepts Afterpay Directly? Primary Payment Method Required Security Hold Estimate (on top of rental cost) Enterprise No Credit/Debit Card $200 - $300 Hertz No Credit/Debit Card $200 - $500 Avis No Credit/Debit Card $200 - $300+ Budget No Credit/Debit Card $200 - $300 Alamo No Credit/Debit Card $200 - $300 National No Credit/Debit Card $200 - $300 In short, plan to use a traditional card for the rental process. While creative solutions exist for the initial payment, the security deposit is non-negotiable and requires a standard card.
104
Share

can you make modifications to a leased car

Generally, you cannot make permanent modifications to a leased car without the leasing company's explicit prior approval. The fundamental issue is ownership; you are essentially renting the vehicle for a set period and are contractually obligated to return it in its original condition, minus normal wear and tear. Unapproved modifications can lead to significant financial penalties at the end of your lease. Understanding "Wear and Tear" vs. Modifications Leasing companies have clear guidelines. Normal wear and tear includes small stone chips on the hood or slight wear on tires. A modification is any alteration that changes the car from its factory state. This is where you need to be extremely careful. Common Types of Modifications and Their Stances The acceptability of a modification often depends on whether it's reversible and if it causes damage. Modification Type Typically Allowed? Key Considerations & Potential Fees Window Tinting Sometimes, with approval Must meet state legal limits; peeling or bubbled tint can incur a removal fee. Aftermarket Wheels Usually not Storing and reinstalling original wheels is your responsibility; damage to hubs is charged. Exhaust System Upgrade Almost Never Considered a major mechanical alteration; voids parts of the factory warranty. Vinyl Wraps/Decals Often Allowed Must be professionally applied/removed without damaging factory paint; residue incurs a fee. Engine Tuning (Software) Almost Never Alters factory ECU settings; detectable by dealers, leading to warranty and lease violation issues. Suspension Lowering Almost Never Alters ride height and handling, considered a significant safety and liability alteration. Interior LED Light Swaps Usually Allowed Simple, reversible changes that don't alter wiring are often fine. The Golden Rule: Get Permission in Writing Before spending any money, the single most important step is to contact your leasing company, detail the exact modification you want to make, and get their approval in writing (email is perfect). This protects you from surprises later. Some companies may allow certain changes if you agree to return the car to stock condition yourself before lease-end. If a modification causes damage that needs repair upon return, you will be billed for the cost.
103
Share

can you put a car on a tow dolly backwards

No, you should not put a car on a tow dolly backwards. Towing a vehicle with its rear wheels on the ground and its front wheels on the dolly is the standard and safest method for front-wheel drive cars. Doing it backwards—placing the car's rear wheels on the dolly—forces the transmission to spin in reverse without proper lubrication, which can cause severe and costly damage to the transmission in a very short amount of time. The core principle is about protecting the car's drivetrain. In a front-wheel drive vehicle, the transmission is directly connected to the front wheels. When the front wheels are on the ground, the car's engine is off, and you're towing, the transmission's internal components are not being lubricated by the oil pump, which only operates when the engine is running. This creates friction and heat, leading to rapid wear or complete failure. This is often referred to as "flat towing" a car in a manner it's not designed for. There are important distinctions based on the car's drivetrain: Front-Wheel Drive (FWD): Always tow with the front wheels on the dolly and the rear wheels on the ground. This is the correct and safe method. Rear-Wheel Drive (RWD): Towing with the rear wheels on the dolly is the correct procedure. However, you must follow the manufacturer's specific instructions. Many modern RWD vehicles require the driveshaft to be disconnected for extended towing to prevent similar transmission damage. All-Wheel Drive (AWD) / Four-Wheel Drive (4WD): These vehicles are the most complex. Most cannot be towed on a dolly at all without significant drivetrain damage. The safest method is almost always flatbed towing, where all four wheels are completely off the ground. Towing Scenario Drivetrain Type Risk of Damage Recommended Method Backwards on Dolly FWD Extremely High Not Recommended Forwards on Dolly FWD Very Low Recommended Backwards on Dolly RWD Low (if done correctly) Possible (Check Manual) Any Dolly Towing AWD/4WD Extremely High Use a Flatbed Trailer Always consult your vehicle's owner's manual for the definitive towing guidelines. It will specify the approved methods and any necessary preparations. When in doubt, opt for a flatbed trailer to eliminate any risk of damaging your car during transport.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.