What are the differences between the 2017 and 2018 Magotan models?

What Causes Engine Cylinder Blow-by?

Engine cylinder blow-by can be caused by the following reasons: 1. Prolonged operation of the engine at excessively high temperatures, leading to inadequate heat dissipation and deformation of the cylinder block due to overheating; 2. Uneven tightening force of the screws between the cylinder gasket and the cylinder block during engine assembly, resulting in excessive air pressure; 3. Poor quality of the engine cylinder gasket, insufficient surface flatness, or the presence of bubbles and uneven edges at the corners; 4. Improper driving habits, such as long-term aggressive driving, causing sudden excessive or insufficient air pressure in the cylinder; 5. Neglecting regular maintenance, such as failing to check whether the radiator has enough water or whether the engine oil is changed properly; 6. Lack of lubrication oil, leading to a sharp rise in friction temperature between the cylinder liner and the piston, as well as between the connecting rods.

2

Share

How to Replace Brake Fluid?

Replace Brake Fluid by following these steps: 1. Park the vehicle on a flat surface and turn off the engine. Open the engine compartment cover and use a syringe to extract the fluid from the reservoir until it reaches the bottom. 2. Fill the reservoir with new brake fluid, using a funnel to avoid spilling it onto the engine compartment. 3. Use a jack to lift the vehicle, starting with the rear wheels, and remove the tires. 4. Locate the bleeder screw on the brake caliper and remove the rubber dust cap. 5. Use a wrench to loosen the bleeder screw, attach a rubber tube to it, and connect the other end to a drain bottle. Then, press the brake pedal inside the car. 6. When the fluid coming out of the rubber tube becomes lighter in color (indicating new fluid), stop pressing the brake pedal and reinstall the tire. 7. After completing the process for all four wheels, check the fluid level in the reservoir under the engine compartment. If it is at the lower limit, add new brake fluid as needed.

18

1

Share

What is the Bluetooth connection method for the Audi A6?

Audi A6's Bluetooth connection method is: 1. Turn on the mobile phone Bluetooth and car Bluetooth; 2. On the car Bluetooth interface, click search device, select the car Bluetooth displayed on the phone, click pair, and enter the pairing code to connect; 5. Select automatic connection in the car Bluetooth settings interface. After that, if the mobile phone and car Bluetooth are both turned on and within a range of 10 meters, automatic connection will be achieved. The Audi A6 is a luxury car produced by Audi, with a length, width, and height of 5012mm, 1855mm, and 1485mm respectively, and a wheelbase of 2945mm. The car's side assist system provides drivers with higher active safety protection. When a vehicle overtakes from the blind spot on the side or rear, it reminds the driver through flashing lights to ensure safe lane changing.

20

5

Share

How to Deal with ESC Malfunction Causing Failure to Start?

The method to handle ESC malfunction causing failure to start is: The car owner should promptly visit a 4S shop or a professional repair shop to inspect and troubleshoot the throttle and sensors. The reasons for ESC malfunction causing failure to start are: 1. The ABS pump is faulty or the throttle is dirty; 2. The speed sensor is faulty, causing the sensor to output incorrect signals. ESC is the Electronic Stability Control system, which can effectively control the stability of the vehicle. For example, when driving on icy roads with low friction in winter, tire slippage can cause the vehicle's movement direction to become uncontrollable. At this time, the system can intervene with the non-slipping wheels to help the vehicle return to a controllable state, ensuring driving safety.

9

5

Share

What does TC mean when it appears on the car dashboard?

The appearance of TC on the car dashboard indicates that the vehicle's Traction Control system is active. This system enhances the vehicle's passability and driving stability. When the ABS (Anti-lock Braking System) detects wheel slippage, the Traction Control system applies braking to the slipping wheel to prevent loss of traction. The Traction Control system relies on electronic sensors to detect when the driven wheels' speed is lower than that of the driving wheels. Upon detection, it sends signals to adjust ignition timing, reduce throttle opening, decrease fuel supply, downshift, or apply braking to the wheels to prevent further slippage. When used in conjunction with ABS, this system further improves the vehicle's safety performance.

4

1

Share

How to Replace the Air Filter in a 2017 Ford Focus?

The method to replace the air filter in a 2017 Ford Focus is as follows: 1. Remove the glove box on the passenger side; 2. Unfasten all the clips on the air filter cover to access the old filter; 3. When installing the new filter, ensure the side with the letters faces outward, then proceed with the replacement. The air filter helps separate solid impurities such as dust, pollen, and grinding particles from the air, ensuring driving safety. The 2017 Ford Focus is a compact car under the Ford brand, equipped with active safety features including electronic stability control, tire pressure monitoring system, run-flat tires, seatbelt reminder, blind-spot monitoring, lane departure warning, traffic sign recognition, fatigue driving alert, and night vision system.

11

5

Share

What are the differences between the 2017 and 2018 Magotan models?

What Causes Engine Cylinder Blow-by?

How to Replace Brake Fluid?

What is the Bluetooth connection method for the Audi A6?

How to Deal with ESC Malfunction Causing Failure to Start?

What does TC mean when it appears on the car dashboard?

How to Replace the Air Filter in a 2017 Ford Focus?

Where is the car air conditioner located?

What do China 5 and China 6 mean?

How to Deal with a Water-Damaged Volkswagen Car Remote?

How to remove the wiper of Trumpchi GS4?