···
Log in / Register

What are the differences between blue license plates and yellow license plates for 4.2-meter trucks?

1Answers
ChloeDella
07/29/2025, 08:50:00 PM

The differences between blue license plates and yellow license plates for 4.2-meter trucks are as follows: 1. Different restricted areas: Blue license plates can apply for urban entry permits, and drivers with a C1 or higher license can operate them. Yellow license plates generally cannot enter urban areas, and drivers must hold a B license or higher to operate them. 2. Different highway toll standards: In terms of highway tolls, blue license plate vehicles have lower fees, while yellow license plate vehicles generally have higher fees. Factors such as the size and weight of yellow license plate vehicles contribute to the relatively higher costs. 3. Different requirements for operating permits: Blue license plate vehicles do not need to apply for operating permits, while yellow license plate vehicles must obtain operating permits. Additionally, the application conditions for passenger and freight transport are different.

Was this review help?
105
Share
More Q&A

How Long Should Idle Charging Last?

If the car has been parked for 10 days without moving, idling for 10 minutes is sufficient for charging. However, if it has been parked for more than 20 minutes, at least 20 minutes of charging is required. More relevant information is as follows: 1. Idling: The car can be charged while idling in place. If the usual purpose is just to help replenish the battery, idling is sufficient. When the car is completely out of power, charging at 1500 rpm for 20 minutes can provide enough power for the starter to start the engine once. Charging at 1500 rpm for 30 minutes can provide enough power for a start the next day. If charging at 1500 rpm for more than 60 minutes, the battery can be almost fully charged. 2. Note: When the car is not used for a long time while away, it is advisable to unplug the power cord to prevent severe battery discharge. If you forget, you can ask family or friends to help start the car for charging. It is also a good idea to keep a set of jumper cables in the car for emergencies.
107
Share

Can Gasoline Be Purchased for Storage?

Gasoline can be purchased for storage. However, it is not recommended to store it at home. Gasoline is highly flammable and volatile, making it extremely unsafe to keep in residential areas. Introduction to Gasoline: Gasoline is a volatile and flammable hydrocarbon mixture liquid derived from the fractional distillation and cracking of petroleum, used as fuel. Appearance of Gasoline: It appears as a transparent, flammable liquid with a distillation range of 30°C to 220°C. The main components are C5 to C12 aliphatic hydrocarbons and cycloalkanes, along with a certain amount of aromatic hydrocarbons. Gasoline has a high octane number (anti-knock combustion performance) and is classified into different grades based on octane ratings, such as 89, 90, 92, 93, 95, 97, and 98. Starting from January 2012, the gasoline grades 90, 93, and 97 were revised to 89, 92, and 95, respectively.
118
Share

Why is there rust inside the wheels of a new car?

It is normal for the steel rims inside new car tires to have surface rust, as they are made of cast iron, and this generally does not affect their normal use. Many car models use aluminum alloy to make the wheel hubs. The advantage of aluminum alloy is that it is sturdy and durable, but the downside is that it is susceptible to acid. Aluminum is easily oxidized when exposed to acid, and if placed in a strong acidic environment, aluminum alloy wheel hubs can indeed corrode. Specific details are as follows: 1. Rust condition: If the rust on the brake disc is minimal, no special treatment is needed, as the slight rust will be removed during braking while driving. If the rust is more severe, it may cause vibrations or shaking during braking, such as brake pad vibration, steering wheel vibration or shaking, or body vibration. 2. Timely maintenance: Severe rust is difficult to remove through braking, and even if the rust is removed, it may cause brake vibration due to uneven thickness of the brake disc. Therefore, it is necessary to perform maintenance on the brake disc every two months to prevent the rust from becoming too severe.
109
Share

What does automatic headlight on/off mean?

Car manufacturers have installed a photosensitive control system for the headlights to facilitate users, which can automatically turn on and off according to the brightness of the light. This is called "automatic headlights". Most high-end vehicles are equipped with this feature. Introduction to automatic headlight on/off: For cars equipped with automatic headlights, when the light becomes dim during driving, the headlights will automatically turn on, and when the light becomes bright, they will automatically turn off. Principle of automatic headlights: Electronic components such as photoresistors are used as sensors and installed behind the rearview mirror inside the car. They send electronic signals to the ECU (electronic control unit), similar to a computer CPU, to inform the ECU whether to turn on or off the headlights, or to switch between high and low beams. The ECU controls the headlight switch and beam changes. When driving, if the light suddenly becomes dim, the headlights will automatically turn on, and when the light is sufficient, they will automatically turn off. Additionally, during nighttime encounters with other vehicles, the headlights may automatically switch between high and low beams.
116
Share

What to Do When the Left Rear Tire of an Audi Has Insufficient Pressure?

Audi Q3 tire pressure is insufficient. First, check if the tire pressure is adequate. If it is insufficient, it needs to be replenished. After inflating, you can reset it via the MMI settings. Press the car button and select 'Store Tire Pressure' to proceed. If the TPMS light on the dashboard is on, a system upgrade at a 4S shop is required. The standard tire pressure for an Audi Q3 is around 2.5, with a normal fluctuation range of ±0.2. The hazards of excessive tire pressure are as follows: 1. Tire damage: Reduced friction and adhesion of the tire, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort. 2. Accelerated tire wear: Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components. 3. Accelerated tire deformation: Causes excessive stretching and deformation of the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. 4. Performance degradation: When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, leading to internal cracks and blowouts, resulting in a tire burst.
109
Share

How to Identify Tire Specifications?

Here is an introduction to the methods for identifying tire specifications: 1. Most tire model markings look like: 205/55R16, and the meanings of these numbers are: (1) 205 indicates the tire section width, the unit is mm, generally the width of the tire is between 145—285mm, with intervals of 10mm. (2) 55 is the aspect ratio, which is the ratio of the tire sidewall height to the tire section width. (3) R indicates that the tire has a radial structure, and 16 is the outer diameter of the wheel, the unit is inches. 2. Letters or symbols with other special meanings: (1) "X" indicates a high-pressure tire. (2) "C" indicates a reinforced type. (3) "B" indicates a bias-ply tire. (4) "—" indicates a low-pressure tire. (5) M and S are abbreviations for Mud and Snow in English, indicating that this type of tire is suitable for use on snowy, icy, and muddy roads. 3. Some tires have arrows or the word OUTERSIDE marked on the sidewall, indicating the rotation direction of the tire.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.