What are the causes of the Sylphy transmission failure?

What are the differences between the Mercedes-Benz C200 and A200?

The differences between the Mercedes-Benz C200 and A200 are as follows: 1. Price: The official guide price of the Mercedes-Benz A200 is slightly lower than that of the C200. 2. Vehicle positioning: The Mercedes-Benz A200 is positioned as a compact car, while the C200 is positioned as a mid-size car. 3. Body dimensions: The Mercedes-Benz A200 measures 4622/1796/1454mm (L/W/H) with a wheelbase of 2789mm. The high-end version has a height of 1462mm. The standard-wheelbase Mercedes-Benz C200 measures 4714/1810/1442mm with a wheelbase of 2840mm. The long-wheelbase Mercedes-Benz C200L measures 4783/1810/1442mm with a wheelbase of 2920mm. 4. Powertrain: The Mercedes-Benz A200 is equipped with a 1.3T inline 4-cylinder turbocharged engine paired with a 7-speed dual-clutch transmission. The Mercedes-Benz C200 is equipped with a 2.0T inline 4-cylinder turbocharged engine paired with a 9-speed automatic transmission.

118

Share

Does the Corolla belong to FAW or GAC?

Corolla belongs to FAW Toyota. The Corolla is the tenth-generation straight-line upgrade product of Toyota COROLLA. This globally best-selling car is produced by FAW Toyota, once again allowing Chinese consumers to experience Toyota's latest technology and driving experience simultaneously. Here is some extended information: 1. The tenth-generation new COROLLA will start from the Chinese market and gradually be sold in other markets around the world. Toyota has adopted a FF (front-engine, front-wheel-drive) platform with a brand-new suspension for the new COROLLA, achieving top-level driving performance in its class while comprehensively adjusting the body size layout. Compared to the current COROLLA, the new COROLLA has a significantly increased body width. 2. The powertrain system features a newly developed inline 4-cylinder 1.8L engine (2ZR type) with dual VVT-i technology, paired with a 6-speed manual transmission, allowing excellent driving performance, world-class fuel efficiency, and low emissions to coexist at a high level. In terms of safety, the new COROLLA thoroughly considers both active and passive safety by adopting a GOA body, VSC (Vehicle Stability Control System), curtain airbags, and side airbags, achieving world-class safety performance in its class.

106

Share

Why Does a Car Need Air Conditioning Cleaning?

Failure to clean and maintain the car's air conditioning system can lead to hazards. Here are the extended details: 1. A large amount of dust and dirt accumulates on the filter plate, radiator, evaporator, and fin surfaces, causing airflow blockage. 2. This results in reduced cooling and heating efficiency, increased power consumption, and noise. 3. It shortens the lifespan of the air conditioning system. 4. It produces unpleasant odors and fosters bacteria and mites, posing health risks. 5. The car's air conditioning intake has a pollen filter designed to prevent external dust from entering during the external circulation mode. When cleaning the air conditioning, remove the pollen filter and spray the air conditioning foam cleaner into the intake. Ensure the air conditioning vents are closed to prevent the foam cleaner from leaking out. Afterward, start the car and turn on the air conditioning to allow the foam cleaner to circulate internally within the system for several minutes, ensuring it reaches all channels. After 5 minutes, turn off the air conditioning and the engine, and the contaminants will drain out from the air conditioning's pipeline system located under the chassis.

104

Share

What is the actual fuel consumption of the BAIC 212?

The comprehensive fuel consumption of the BAIC 212 is 7.5-8.4L/100km. Currently, there are 8 models of the BAIC 212 on sale, including the 2.4T Triangle Door Centennial Tribute Edition, 1.5T Triangle Door Centennial Tribute Edition, Three-door Canvas Top, Square-door Canvas Top, Square-door Hard Top, and Three-door Hard Top, with a comprehensive fuel consumption of 7.8L/100km. The Triangle Door version has a comprehensive fuel consumption of 7.5L/100km. The 2.4T Square-door Hard Top has a comprehensive fuel consumption of 8.4L/100km. The above figures are NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 9-11L/100km. Specific factors affecting car fuel consumption are as follows: Car weight: Larger and heavier cars tend to consume more fuel. Generally, a small family car with a 1.6L engine and a weight of about 1.2 tons has a fuel consumption of approximately 7.5 liters (calculated under full load conditions), while an SUV model weighing about 1.5 tons has a fuel consumption of around 8.5 liters. Different weights lead to varying fuel consumption levels. Wind resistance: Higher wind resistance increases fuel consumption during driving. Cars with better aerodynamics have lower wind resistance, resulting in lower fuel consumption. Economical RPM: During driving, the engine has a most economical torque output point. Maintaining the car's speed within this torque output point significantly reduces fuel consumption. Generally, small-displacement cars achieve this at about 70 km/h, while larger-displacement cars reach it at around 100 km/h. Keeping within this economical RPM range ensures minimal fuel consumption. Driving style: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before stopping at traffic lights can increase fuel consumption.

117

Share

What is the range of the Honda CR-V plug-in hybrid?

Honda CR-V plug-in hybrid version is equipped with a SPORT e+ plug-in hybrid system consisting of a model LFB13 2.0L engine and an electric motor. The system has a comprehensive maximum power of 215Ps, consistent with the Sharp·Hybrid model. However, the new vehicle is equipped with a 16kWh power battery, which enables the Honda CR-V plug-in hybrid version to achieve a maximum pure electric range of 85km. The upgrade of the Honda CR-V Sharp·Hybrid to a plug-in hybrid model necessitated increasing the power battery capacity and adding on-board charging equipment. The Honda CR-V plug-in hybrid version features a relatively flat battery pack arranged under the chassis to minimize intrusion into the passenger space. However, this design somewhat compromises the fuel tank space, reducing the new vehicle's fuel tank capacity to only 26L (compared to 53L for both the fuel version and the oil-hybrid version). The increased power battery adds 350kg to the vehicle's weight, which to some extent affects the acceleration performance. Factors affecting the range: Driving habits are the most critical factor in the power system's energy consumption, closely related to throttle opening, discharge current, driving conditions, and speed. Maintaining a low and stable discharge current output will make the vehicle relatively more energy-efficient. For example, gently and lightly pressing the accelerator pedal, avoiding sudden braking, using ECO mode, and fully utilizing the vehicle's energy recovery function are recommended, while minimizing the use of SPORT mode. Heavy use of electrical equipment: The comfort provided by air conditioning has a certain impact on the range. However, since the total battery capacity and discharge capability remain unchanged when using power-consuming devices, it is advisable to understand the power consumption of discharge devices better and lower the expectations for range alone. Vehicle load: The number of passengers or heavy loads carried by the vehicle, or low tire pressure, will consume more power to overcome the resistance during driving, increasing power consumption during the journey and shortening the range. Temperature affects the range of electric vehicles mainly when it is too high or too low, requiring the driver to use devices such as air conditioning inside the vehicle. These devices directly consume the electric energy of pure electric vehicles, such as using the heater in winter. Additionally, in cold winter temperatures, the actual discharge capability of lithium batteries decreases accordingly, leading to a reduction in the actual range.

107

Share

What are the differences between Toyota Yaris X and Yaris?

Here are the differences between Toyota Yaris X and Yaris: 1. The Yaris is a hatchback, while the Yaris X is a hatchback crossover. 2. The Yaris X has a higher ground clearance, better off-road capability, and comes with exterior styling kits. 3. The Yaris X is more expensive than the Yaris. 4. The Yaris X is equipped with a roof rack, and it is 20 millimeters wider and 25 millimeters taller than the Yaris. Additional information: 1. Both the Yaris and Yaris X are powered by a 1.5-liter naturally aspirated engine, which produces 110 horsepower and a maximum torque of 138 Nm in its factory state. This engine is equipped with a dual VVT-i variable valve timing system. It is paired with either a 5-speed manual transmission or a CVT. The CVT has a relatively simple internal structure, consisting of only two pulleys and a steel belt. The steel belt can move along the pulleys, allowing the transmission to vary speed and torque. 2. The Yaris uses a MacPherson strut front suspension and a torsion beam rear suspension. The torsion beam rear suspension is used to reduce costs, thereby lowering the price and enhancing market competitiveness. Torsion beam suspension is commonly used in vehicles of this class. Additionally, the torsion beam rear suspension helps to increase rear passenger space and trunk space, which is important for small family cars.

109

Share