···
Log in / Register

What are the body dimensions of the Kicks?

6Answers
TravisLee
07/29/2025, 01:15:25 PM

Dongfeng Nissan Kicks has a length/width/height of 4312mm/1760mm/1613mm, which are official data. The length of Dongfeng Nissan Kicks refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and respectively touching the most protruding parts at the front and rear ends of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the most rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the supporting plane of the vehicle. The naturally aspirated engine of Dongfeng Nissan Kicks has a maximum power of 90kw and a maximum torque of 143 N·m. The maximum power speed of this engine is 6300 rpm, and the maximum torque speed is 4400 rpm. It is equipped with multi-point electronic fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is matched with a continuously variable transmission (CVT). The state has relevant regulations on vehicle dimensions. According to the national standard "GB1589-89" issued, the total width of the vehicle does not include rearview mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. That is to say, in the national standard, the significance of vehicle width data lies in providing sufficient space during overtaking, avoiding accidents due to excessive width or situations where road markings are narrower than the vehicle's width. In addition, the state stipulates that the total width of a vehicle shall not exceed 2.5m to meet the usage requirements of relevant public roads.

Was this review help?
116
Share
OscarFitz
08/14/2025, 03:48:17 AM

After driving the Kicks for a while, I must say its body size is quite moderate. It's approximately 4.29 meters in length, 1.76 meters in width, and 1.59 meters in height, with a wheelbase of 2.62 meters. This size makes it particularly agile to drive—not too large to cause difficulties navigating through residential areas, yet not too small to compromise legroom. I've tried weaving through traffic during peak hours, and the car's width is just right for squeezing through narrow intersections. Parking and turning feel effortless. The trunk space is also practical, fitting two suitcases plus some miscellaneous items for weekend outings. Compared to other SUVs, the Kicks' proportions make it fuel-efficient and hassle-free, ideal for daily commuters. If you're considering a small family car, its size is definitely an advantage, offering stable handling without any wobbliness. I recommend paying attention to the turning radius during a test drive—it's quite maneuverable in practice.

Was this review help?
20
Share
Expand All
OIsabella
10/13/2025, 01:49:38 AM

As a frequent visitor to car forums, I'm quite familiar with the dimensions of the Kicks. It measures 4294 mm in length, 1760 mm in width, 1588 mm in height, with a wheelbase of 2620 mm. These numbers are standard for a compact SUV in practice, balancing practicality and efficiency in design. When driving, I find the height just right, with minimal body roll during turns. The width is well-controlled, avoiding the bulky feel of larger vehicles, resulting in lower wind resistance and relatively better fuel efficiency on highways or city roads. The longer wheelbase provides an advantage in rear-seat space, comfortably accommodating two passengers, while three can fit snugly but not uncomfortably. The overall weight is around 1.2 tons, paired with smaller wheels that enhance handling. During routine car washes or maintenance checks on tires and chassis, the dimensions make servicing simpler. For comparison, the HR-V in the same class is slightly smaller, but the Kicks offers better stability.

Was this review help?
2
Share
Expand All
LuciaLee
11/26/2025, 01:48:56 AM

I live in the city center and care a lot about car dimensions when choosing a vehicle. The Kicks has a body length of 4294mm, width of 1760mm, height of 1588mm, and a wheelbase of 2620mm. This car doesn't take up much space in residential areas and fits easily into parking spots. Its small turning radius makes U-turns on narrow roads convenient. During rush hour commutes, its moderate width doesn't get stuck at intersections, and its height stays within underground parking limits. The trunk capacity is sufficient for grocery shopping or short trips, and its compact design saves fuel and hassle. Compared to larger SUVs like the CR-V, the Kicks offers more flexible dimensions.

Was this review help?
11
Share
Expand All
Rita
01/16/2026, 03:16:44 AM

As a parent with kids, I pay attention to the practicality of vehicle dimensions. The Kicks is 4.29 meters long, 1.76 meters wide, and 1.59 meters tall, with a wheelbase of 2.62 meters. The rear seats offer ample space, making child seat installation comfortable. The height is just right for easy entry and exit, and the trunk easily accommodates strollers. The slightly narrower width aids parking in residential areas without scratching neighboring cars. The overall size helps control fuel consumption, saving costs for family trips. I recommend test-driving to experience the seating comfort firsthand.

Was this review help?
18
Share
Expand All
DelDylan
04/12/2026, 10:37:39 PM

For fuel-efficiency-conscious individuals like me, the Kicks' dimensions are ideal. It measures 4294mm in length, 1760mm in width, and 1588mm in height, with a low drag coefficient. The 2620mm wheelbase ensures stable driving, while the moderate width minimizes fuel consumption fluctuations. It shows obvious fuel savings on daily suburban drives, with controlled dimensions keeping the vehicle light. Easy parking also means less fuel waste.

Was this review help?
3
Share
Expand All
More Q&A

How to reset the maintenance light on a 2018 Roewe RX8?

2018 Roewe RX8 maintenance light reset method: 1. Turn on the ignition switch, press and hold the reset button 5, then turn off the ignition switch; 2. Press and hold the reset button 5 until the clock and mileage on the dashboard disappear, then release the button; 3. Press and hold the reset button 5 again, then turn on the ignition switch, the maintenance light on the dashboard will flash; 4. Press and hold the reset button 5, wait until the maintenance light stops flashing, then release the button. The Roewe RX8 is a mid-to-large SUV under SAIC Motor, with body dimensions of 4923mm in length, 1930mm in width, 1840mm in height, and a wheelbase of 2850mm.
103
Share

How to Determine if a Tensioner Pulley is Faulty?

Methods to determine if a tensioner pulley is faulty include: 1. Noticeable resonance, loud noise during rapid acceleration, and insufficient power; 2. A squeaking sound when starting the vehicle; 3. Loud noise under high power consumption. The tensioner pulley is a belt tensioning device used in the automotive transmission system. It mainly consists of a fixed housing, tensioning arm, pulley body, torsion spring, rolling bearing, and spring bushing. It automatically adjusts the tension force based on the belt's tightness to ensure the transmission system remains stable, safe, and reliable. A tensioner generally refers to the belt tensioning device, while a tensioner pulley specifically refers to the belt tensioning device used in automotive transmission systems.
108
Share

How to Solve When the EPC Warning Light Comes On?

Solutions when the EPC warning light comes on: 1. Address and resolve intake system faults, use compliant fuel, and clean the throttle body; 2. Remove carbon deposits from related components; 3. Rewrite ECU-related data. EPC stands for Electronic Power Control, and the illumination of the warning light indicates a potential fault within the electronic throttle system, which may affect the vehicle's normal operation. Reasons for the EPC warning light coming on: 1. Intake system faults, such as leaks or blockages; 2. Dirty throttle body with excessive carbon deposits; 3. Use of non-compliant fuel; 4. Abnormal cylinder pressure or poor operating conditions; 5. Valve faults, sticking, or carbon buildup; 6. ECU faults; 7. Sporadic faults or false alarms.
120
Share

What Happens When a Car is Low on Engine Oil?

Insufficient engine oil in a car can lead to inadequate lubrication of the engine, which increases engine wear. If the engine runs low on oil for an extended period, it may result in engine failure. Engine oil, also known as motor oil or engine lubricant, is a substance enhanced with additives in a base oil, primarily containing anti-wear additives, detergents, dispersants, and multi-grade viscosity index improvers. The main functions of engine oil are to reduce friction and wear on moving parts, remove sludge (one of the functions of dispersants) and varnish (function of detergents) from the engine. It also neutralizes acids produced from fuel and lubricant oxidation (function of detergents), improves piston ring sealing, and cools the engine by carrying away heat from moving parts.
107
Share

How to Adjust the Mileage Display on a BMW?

Taking the 3 Series as an example, the mileage display on the new BMW 3 Series needs to be switched via the BC button to change the driving display content. Here is a detailed introduction about the new BMW 3 Series: 1. Model-related: The new BMW 3 Series is the latest generation sedan product from BMW Group, with a body weight of 1465 kg and an inline four-cylinder gasoline engine. Its aesthetic design, engineering design, high-tech features, luxury comfort, and safety have all reached a new level. 2. BC button-related: The BC button is used to switch the display content on the instrument panel's LCD screen. This button is used to confirm the selected display or set values. Each press switches between average fuel consumption, average speed, and remaining fuel mileage.
113
Share

Can You Press the Brake While Downshifting?

This depends on the situation: 1. First, you need to reduce the car's speed before downshifting. Otherwise, it may easily damage the transmission gears. In this case, you can press the brake as needed. 2. Second, when downshifting, quickly press the clutch first and shift to neutral. Release the clutch, then give a quick blip of the throttle, quickly press the clutch again, downshift, and then steadily release the clutch—fast at first and then slow. That's how it's done. However, if you keep pressing the brake, you must accurately judge the gear. For example, if your car is almost coming to a stop, you can't shift to 3rd gear as originally planned—you must shift according to the current speed.
117
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.