···
Log in / Register

What are the body dimensions of the Hongqi E-HS3?

4 Answers
OAshley
07/29/25 8:11am

The body dimensions of the Hongqi E-HS3 are: length 4490mm, width 1874mm, height 1613mm, with a wheelbase of 2750mm. Taking the 2019 ZhiLian QiYue two-wheel-drive version of the Hongqi E-HS3 as an example, it belongs to the compact SUV category, with a curb weight of 1742kg. The 2019 ZhiLian QiYue two-wheel-drive version of the Hongqi E-HS3 features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a permanent magnet synchronous motor, delivering a maximum power of 114kW and a maximum torque of 340Nm, paired with a single-speed fixed gear ratio transmission.

Was this review help?
15
5
Share
SanWeston
08/13/25 4:12am

I'm quite familiar with the dimensions of the Hongqi E-HS3. It's approximately 4,490mm in length, 1,874mm in width, and 1,613mm in height, with a wheelbase around 2,720mm. Driving this car in the city feels very convenient—its size is neither too large to squeeze into parking spots nor too small to feel cramped. The wheelbase provides ample space in the rear seats, making it comfortable for passengers or carrying items. On the highway, the car's width ensures stability without swaying, and its moderate size makes parking effortless. The reasonable ground clearance prevents scraping on slopes. This dimension design takes urban commuting and daily use into account, offering open visibility, nimble handling, and comfortable legroom. The trunk is spacious enough for luggage or shopping, making it a well-balanced overall package.

Was this review help?
12
4
Share
Expand All
LaSkylar
10/05/25 4:54am

I remember the dimensions of the Hongqi E-HS3 clearly: length is 4490mm, width is 1874mm, height is 1613mm, and the wheelbase is 2720mm. This car is quite suitable for taking my kids to school and family outings. The spacious rear seating area gives my child plenty of legroom, and the trunk size is more than enough for a stroller or travel bags. When parked in the neighborhood, the width doesn't take up the entire parking space, and the height makes it easy to open and close doors without worrying about dings. The compact size makes parking easier, but the well-controlled turning radius ensures effortless handling, and the car feels stable with comfortable suspension. The moderate dimensions ensure passenger safety, providing a smooth ride on highways and hassle-free daily driving. The parking assist is well-suited to this size, and the rear parking sensors are highly accurate.

Was this review help?
3
4
Share
Expand All
LaOlive
11/18/25 6:24am

The dimensions of the Hongqi E-HS3 are 4,490mm in length, 1,874mm in width, 1,613mm in height, with a wheelbase of 2,720mm. Driving in the city, the size is just right—parking is hassle-free, especially in tight spots where it can squeeze in. The turning is flexible and easy to control. Inside, the front legroom is spacious, and the rear seats aren't cramped. The seat height is moderate, making entry and exit convenient. The compact body dimensions ensure quick handling response without getting stuck, making the drive smooth. When parking, the size doesn't take up extra space, making daily commuting efficient and highly practical.

Was this review help?
8
0
Share
Expand All
More Forum Discussions

How to Close the Hood of a Corolla?

The method to close the hood of a Corolla is to lower the hood support rod with one hand while holding the hood with the other hand, then slowly lower it. When the hood is about 30 centimeters from closing, release it to let it fall freely. A 'clunk' sound indicates successful closure. Below are additional details about closing the hood of a Corolla: 1. Precautions: Before closing the hood, always ensure the support rod is placed back into its clip. Closing the hood while the support rod is still extended may cause the hood to bend. Check and confirm that the hood is fully closed and locked. If the hood is not properly locked, it may open while driving, leading to serious accidents, injuries, or even fatalities. 2. Function: As the hood is a crucial part of the vehicle, any issues with it can affect normal car usage. Like other car components, the hood serves important functions. Learning the correct way to open and close the hood is essential. Regular maintenance of the hood can prolong its lifespan and prevent disruptions to normal vehicle use due to hood damage.
16
1
Share

Can a BMW Key Still Work After Being Soaked in Water?

Key may not work after being soaked in water. If the soaking time is long and the key has short-circuited due to water ingress, it needs to be disassembled and dried to determine if it can still be used. Here is some additional information: 1. Wipe with tissue: If a car key gets wet, it's similar to a phone getting wet—do not press the buttons immediately, as this can cause water to seep into the inner layers faster. Use a dry cloth or tissue to wipe the surface clean, and use highly absorbent tissue to clean the inside. 2. Dry with cold air: Use a hairdryer on the cold setting to dry the key. Never use hot air, as the internal circuit board should not be exposed to high heat. Alternatively, you can place the key in a breathable bag and then into a dry rice container, as rice is highly absorbent and can draw out moisture. 3. Wipe with alcohol: Use a cotton swab dipped in high-concentration alcohol to gently clean the internal button contacts and other parts, as high-concentration alcohol has strong water-absorbing properties.
15
2
Share

What to Do When the BMW Fuel Tank Cap Won't Open?

Methods to handle a stuck fuel tank cap: 1. If the fuel tank cap is stuck or rusty: Insert a small wooden piece into the gap of the fuel tank cap to pry it open, remembering to pull the fuel tank cap release switch. 2. If the fuel tank cap spring loses elasticity: You can install a small spring (not too soft or too long) on the protruding rubber pad of the fuel tank to increase the elasticity between the fuel tank cap and the locking mechanism. 3. If the fuel tank cap hinge or latch is worn out: Apply lubricating grease to the hinge and latch of the fuel tank cap. 4. If the fuel tank cap is misaligned: Some cars have thinner sheet metal, which may cause the fuel tank cap to misalign. In this case, visit a repair shop to realign it. 5. If there is a control circuit issue: For cars with remote-controlled fuel tank caps, besides the above issues, the small motor on the fuel tank cap might be burnt out, usually requiring motor replacement. 6. If the fuel tank cap is frozen or too dirty: If the fuel tank cap is stuck due to freezing weather or excessive dirt, clean or thaw it first instead of forcing it open to avoid secondary damage.
12
2
Share

What Causes Weak Airflow from BMW X3's Air Conditioning?

Reasons for weak airflow from BMW X3's air conditioning: 1. Incorrect air direction: Check if the wrong air direction is selected. If the air is directed towards the windshield or side windows, it may feel like there's less airflow into the cabin. 2. Blower motor malfunction: A faulty blower motor can reduce airflow from the vents. Short circuits or decreased power in the blower motor will naturally result in weaker airflow. If the blower motor is the issue, it's recommended to have it inspected and repaired by a 4S shop or professional repair service, as this is not something owners can fix themselves. 3. Dirty air filter: A clogged air filter can obstruct airflow. The air filter is designed to remove impurities from the air entering the cabin. If too many impurities accumulate, airflow from the vents will be affected. Regularly clean the air filter using a vacuum cleaner to remove dust or an air compressor gun. If the filter is excessively dirty, replacing it is advisable. 4. Condenser blockage: A blocked air conditioning condenser can also lead to reduced airflow. Since the condenser is located at the front of the vehicle and is difficult to clean, it's best to leave this task to professionals to ensure thorough cleaning.
8
2
Share

What to Do When the Car Fogs Up in Rainy Weather?

Here are the methods to deal with car window fogging in rainy weather: 1. Preventive measures such as applying anti-fog spray: Spray a small amount of anti-fog agent on the car windows (inner side) and wipe them clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed on the surface, which effectively prevents the formation of fog caused by moisture condensation, especially suitable for cold winters. Alternatives to anti-fog spray include dishwashing liquid, soapy water, glycerin, alcohol, or salt water. After drying, wipe off excess residue with chamois or a soft dry cloth to ensure the car windows remain fog-free for several days. 2. Air conditioning cooling method: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and eliminate fog. In summer, especially when multiple people enter the car, if the air conditioning is not turned on promptly, the high humidity from exhaled breath can quickly cause the windshield to fog up. At this point, turn on the air conditioning to blow cold air onto the windshield. Using the dehumidifying function, the fog on the windshield can be removed quickly. However, if the humidity is too high and the air conditioning is not effective enough, slightly open a window to rapidly reduce the humidity inside the cabin. Of course, combining both methods can yield faster results.
11
2
Share

How to Manually Reset the Maintenance Reminder Light?

Method to reset the maintenance reminder light: Turn the ignition key to the "ON" position with your right hand (do not start the engine), press and hold the reset button on the right side with your left hand, then turn off the ignition key. Wait until the instrument cluster screen goes completely black, then turn the key to the "ON" position again. Keep holding the reset button until the maintenance reminder disappears automatically. At this point, the issue is resolved. Now, turn off the ignition and restart the car to confirm the maintenance reminder no longer appears—mission accomplished. If the reminder still shows, it indicates improper operation; repeat the process until successful. Additional notes on resetting: 1. Key requirements: First, you must continuously hold the reset button without releasing it. Second, only turn the key back to the "ON" position after the screen has gone completely black following key removal. Third, during the second power-on, wait until the maintenance reminder disappears before releasing the reset button with your left hand. 2. Reset button: For the Lavida Elegance model, the so-called "reset button" refers to the elongated button at the bottom right corner of the instrument cluster. This button serves dual functions—it toggles between odometer display modes and resets trip mileage. Different car models may have variations in button design and placement; some experimentation may be required.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.