···
Log in / Register

What are the 5-point deduction items in the Subject 3 exam?

6Answers
SanDeclan
07/29/2025, 10:59:14 AM

Subject 3 road test will deduct 5 points for the following reasons: During startup, improper control of the accelerator pedal causing excessively high engine speed, deduct 5 points; Before starting the engine, failure to adjust the driver's seat, rearview mirrors, or check the instrument panel, deduct 5 points; Failure to turn off the engine before exiting the vehicle, deduct 5 points; During temporary nighttime roadside parking, failure to turn off headlights or activate hazard lights, deduct 5 points. Subject 3 exam precautions: During the Subject 3 exam, it is necessary to check the vehicle's exterior and safety conditions in advance, ensure all lights are functioning properly, strictly follow exam requirements during the test, avoid crossing lane markings, and refrain from speeding. Training hour requirements: Subject 3 training consists of 40 total hours: 16 hours of theory, 4 hours of simulated driving, and 20 hours of practical operation. According to the teaching syllabus, each student can sign for a maximum of 4 hours per day.

Was this review help?
103
Share
OAiden
08/13/2025, 03:35:44 AM

In the Subject 3 driving test, I've seen many common mistakes that result in a 5-point deduction. Students often lose points due to neglecting small details. For example, forgetting to turn on the turn signal when starting the car is a basic rule—points are deducted as soon as the test vehicle moves. When changing lanes, proper observation through the rearview mirror is crucial; failing to check carefully or just glancing before turning the steering wheel will immediately catch the examiner's attention. Additionally, turn signals must be used for at least 3 seconds—turning too hastily will lead to point deductions. Other mistakes include not signaling correctly or failing to check blind spots when overtaking, or forgetting to slow down when turning at intersections, all of which can result in a 5-point deduction. I recommend practicing these actions regularly to make them habits, rather than regretting them during the test. Although these minor errors deduct few points individually, they can accumulate and lead to failing the test. More importantly, developing good habits enhances daily driving safety and prevents accidents on the road. In short, details determine success—mastering these points thoroughly will help you pass smoothly.

Was this review help?
10
Share
Expand All
SanRyder
10/11/2025, 01:49:01 AM

During my driving test for Subject 3, I personally experienced several 5-point deduction pitfalls that almost cost me points. You must turn on the indicator before starting—many beginners forget this, and I saw fellow test-takers fail because of it. When changing lanes, proper mirror checks are crucial; failing to observe carefully or moving too quickly can easily lead to deductions. Indicators must remain on for at least 3 seconds—I once turned too hastily during practice and was warned by my instructor. Other common mistakes include not signaling or checking surroundings when overtaking, or failing to slow down at intersections—examiners watch these closely. My key takeaway was to simulate test scenarios during practice, like counting "one-two-three" before lane changes to build muscle memory. Though minor, these deductions add up and, more importantly, help prevent real-world collisions or scrapes. Paying extra attention makes the test smoother.

Was this review help?
18
Share
Expand All
Freddy
11/24/2025, 01:54:23 AM

Among the 5-point deduction items in Subject 3, I believe safety is the core focus. Failing to turn on the turn signal when starting is dangerous, and it's penalized in the test because it alerts the vehicle behind you that you're about to move. Changing lanes without checking the rearview mirror can cause accidents, hence the 5-point deduction. Using the turn signal for less than 3 seconds is too quick for others to react, which is also a major no-no in the test. Improper overtaking or failing to slow down when turning at intersections can lead to collision risks. In my daily driving, I've found these rules aren't harsh but life-saving measures. I remind everyone to focus on these points during the test and not let habitual mistakes hold you back. Safety first—these small deductions can help cultivate good driving awareness.

Was this review help?
2
Share
Expand All
ElliotLee
01/14/2026, 03:26:21 AM

There are many details in the Category 3 driving test that can deduct 5 points. I've carefully analyzed the rules. Failing to turn on the turn signal when starting, insufficient mirror observation before changing lanes, and using turn signals for less than 3 seconds are all standard point deductions. Common mistakes also include not signaling or checking blind spots when overtaking, and failing to slow down when turning at intersections. I understand these rules are designed to simulate real driving conditions—for example, using a turn signal for less than 3 seconds doesn't give enough warning to vehicles behind. In actual driving, these habits can reduce risks. I recommend using a timer during practice to reinforce these actions. Mastering these small details can help avoid accumulating mistakes during the test and improve overall smoothness. Remember, the rules are based on logic, so don't skip practice.

Was this review help?
5
Share
Expand All
VonAlejandro
04/10/2026, 11:33:16 PM

There are quite a few instances where you can lose 5 points in the Driving Test Part 3, and as an ordinary driver, I often pay attention to these. Signaling when starting is a strict requirement—fail to do so, and the examiner will deduct points immediately. When changing lanes, you must check the mirrors carefully; a moment of distraction can lead to mistakes. The turn signal must be held for at least 3 seconds; changing lanes too hastily will get you penalized. Losing 5 points also applies to improper overtaking, failing to slow down when turning at intersections, etc. I’ve seen others get into minor collisions due to these mistakes. Developing habits like checking lights before starting and counting to three before changing lanes saves a lot of trouble in daily driving. Don’t underestimate these small details in the test—they add up and affect the outcome. Safe driving starts with the little things.

Was this review help?
17
Share
Expand All
More Q&A

how to remove mold from carpet in car

The most effective way to remove mold from your car carpet is to act quickly, using a combination of thorough drying, targeted cleaning with a vinegar or commercial antimicrobial solution, and diligent brushing. For severe infestations, replacing the carpet may be the only safe option to protect your health. The key is to eliminate the moisture source that caused the mold; otherwise, it will return. Start by putting on protective gear: an N95 mask, goggles, and gloves. Mold spores are allergens and can be harmful when inhaled. Immediately remove any visible moisture using a wet/dry vacuum. Then, take the car to a well-ventilated area, preferably in direct sunlight with the doors open, to dry the carpet completely. For cleaning, a simple solution of distilled white vinegar and water (1:1 ratio) is a highly effective, non-toxic fungicide. For tougher jobs, a commercial mold remover designed for automotive interiors is recommended. Always test any cleaner on a small, hidden area of the carpet first to check for colorfastness. Application Process: Scrub: Liberally apply your chosen solution to the moldy area and scrub aggressively with a stiff-bristled brush. This action is crucial for breaking up the mold roots embedded in the carpet fibers. Dwell: Let the solution sit for at least 15-20 minutes to kill the mold at the source. Extract: Use the wet/dry vacuum again to extract as much liquid as possible. Dry Again: This is the most critical step. Use fans or a dehumidifier directed at the carpet until it is completely dry to the touch. This may take a full day. If the mold stain or smell persists, sprinkle baking soda over the area, let it sit for several hours to absorb odors, and then vacuum it up. For pervasive problems, a professional detailer with steam cleaning and ozone treatment equipment is your best bet. Cleaning Solution Efficacy Against Mold Safety for Car Interior Cost Best For Distilled White Vinegar High (Kills ~82% of mold species) High (Non-toxic) Low ($) Mild to moderate cases, eco-friendly Commercial Mold Remover Very High (Kills >99% of mold) Medium (Can be harsh; ventilate) Medium ($$) Severe infestations Baking Soda Paste Low (Deodorizes, mild abrasive) High Low ($) Final step for odor removal Steam Cleaning (Pro) Highest (Heat kills mold) High High ($$$) Stubborn, deep-seated mold Ozone Treatment (Pro) Highest (Eliminates spores/odor) Medium (Do not occupy during) High ($$$) Removing persistent musty smells
101
Share

how to remove sticker glue from a car

The most effective way to remove sticker glue from your car's paint is to use a dedicated automotive adhesive remover, as it's specifically formulated to dissolve the bond without damaging the clear coat. For a common household alternative, a 1:1 mixture of isopropyl alcohol and water is a safe and highly effective option. The key is to always start with the gentlest method and never use sharp tools like razor blades directly on the paint. First, wash and dry the area to remove any loose dirt. For a small residue spot, you can often lift the glue by repeatedly dabbing it with a piece of masking or packing tape. For more stubborn glue, soak a microfiber cloth in your chosen solvent (adhesive remover, rubbing alcohol, or even a citrus-based oil like Goo Gone). Lay the soaked cloth over the residue for 2-3 minutes to let the solution break down the adhesive. Then, gently wipe the area in a circular motion. The glue should wipe away easily. Always follow up by washing the area with car soap and water to remove any solvent residue, and then apply a coat of wax to protect the paint. Using excessive force or harsh chemicals like nail polish remover (acetone) or gasoline can permanently dull or damage your car's clear coat. Patience and the right products are crucial for a clean, scratch-free result. Method/Product Primary Active Ingredient Best For Effectiveness (1-5) Risk to Paint (1-5, 5=High) Average Cost Automotive Adhesive Remover Heptane, D-Limonene Large areas, stubborn glue 5 1 (Very Low) $8 - $15 Isopropyl Alcohol (70%+) Isopropyl Alcohol Medium residue, safe option 4 1 (Very Low) $3 - $5 Citrus-Based Cleaner (Goo Gone) D-Limonene (Orange Oil) Small to medium spots 4 1 (Very Low) $5 - $10 Cooking Oil (Olive, Canola) Natural Oils Very light, fresh residue 2 1 (Very Low) In Kitchen Peanut Butter Oils & Fats Very light, fresh residue 2 1 (Very Low) In Kitchen WD-40 Petroleum Distillates Stubborn glue (use sparingly) 4 3 (Moderate) $5 - $10 Acetone (Nail Polish Remover) Acetone Not Recommended 5 5 (Very High - Damages paint) $3 - $6 Gasoline Hydrocarbons Extremely Hazardous 5 5 (Very High - Damages paint) N/A
115
Share

how to tell if a car is salvage title

The most reliable way to tell if a car has a salvage title is to run a vehicle history report using its VIN (Vehicle Identification Number) . A salvage title is issued by a state's Department of Motor Vehicles (DMV) when a car has been damaged to the point where the cost of repairs exceeds a certain percentage of its value, typically between 75-100%. While a visual inspection can reveal red flags, the title brand is a legal designation that is only confirmed through official channels. Start with the VIN check. Services like the National Insurance Crime Bureau's (NICB) VINCheck are free and can instantly reveal if a vehicle has been reported as salvaged or stolen. For a more comprehensive report, paid services like Carfax or AutoCheck compile data from state DMVs and insurance companies, providing a clear history of title brands. Beyond the report, conduct a thorough physical inspection. Look for signs of major repairs: Mismatched Panels: Inconsistent color shades, poor panel gaps, or different VIN stickers on doors, fenders, and the hood. Structural Issues: Check for uneven tire wear, a crooked frame, or doors and trunk lids that don't close smoothly. Water Damage: Musty odors, silt in unusual places (like under the carpet), fogging inside light assemblies, or rust on screws inside the cabin can indicate flood damage. Always be wary of a deal that seems too good to be true. A significantly lower price than comparable models is a major red flag. If a seller is hesitant to provide the VIN or allow a pre-purchase inspection by a trusted mechanic, walk away. Inspection Area What to Look For Potential Salvage Title Indicator Vehicle History Report "Salvage," "Flood," "Rebuilt," "Junk" brand Confirmed indicator Price 30-50% below market average for similar models Strong indicator Paint & Body Mismatched colors, orange peel texture, overspray on trim Indicator of major repair Panel Gaps Uneven spacing between doors, hood, trunk, and fenders Indicator of poor repair/collision VIN Stickers Missing, mismatched, or non-original VIN stickers on body panels Indicator of part replacement Frame/Chassis Visible welding, ripples, or misalignment under the car Indicator of structural damage Interior Damp/musty smell, water lines, silt under carpets Indicator of flood damage Title Document Words like "Salvage," "Rebuilt," or "Flood" on the paper title Confirmed indicator
109
Share

how to take off tinted windows on car

The most effective and widely recommended method for removing tinted windows from a car is the steaming method . This technique uses heat and moisture to reactivate the old adhesive, allowing you to peel the film off in large sheets with minimal residue. While it requires a specific tool—a handheld garment steamer—it significantly reduces cleanup time and the risk of damaging your rear window defroster elements compared to other methods. Before you start, you’ll need a few supplies: a handheld steamer, a razor blade scraper, ammonia-free glass cleaner (ammonia can damage rear defroster lines), a trash bag, and plenty of paper towels or microfiber cloths. Park your car in direct sunlight or in a very warm garage; heat is your ally in this process. A Comparison of Common Tint Removal Methods Method Best For Tools Needed Risk of Damage Estimated Time per Window Steaming All windows, especially rear with defroster Handheld steamer, razor scraper Low 15-30 minutes Soapy Water & Trash Bag Large, flat windows Black trash bag, soapy water, razor scraper Medium 30-45 minutes Ammonia & Trash Bag Stubborn, old tint (avoid on rear window) Ammonia, black trash bag, razor scraper High (defroster damage) 45-60 minutes Heat Gun Small, stubborn sections Heat gun, razor scraper High (glass cracking) Varies Here’s the step-by-step process for the steaming method: Prep the Area: Thoroughly clean the exterior of the window you're working on. Apply Heat and Moisture: Starting in one corner, slowly move the steamer head back and forth across a 1-foot section of the inside of the tinted glass. The goal is to heat the film and glass without holding the steamer in one spot for too long. Peel the Tint: As the adhesive softens, use your fingernail or a plastic pry tool to lift a corner of the film. Continue steaming the area just ahead of where you are peeling, and slowly pull the tint back on itself. If it resists, apply more steam. Remove Adhesive Residue: After the film is off, you’ll have a sticky layer of adhesive left. Spray it with your glass cleaner, let it sit for a minute, and then scrub it off with a razor blade held at a 45-degree angle. Use a fresh section of the blade frequently. Wipe the clean glass dry. The key is patience. Rushing can lead to the film tearing or the adhesive being harder to clean. If the tint is extremely old and brittle, it may come off in pieces, making the job longer. For the rear window, be extra cautious with the razor blade around the delicate defroster lines to avoid cutting them.
108
Share

how to remove oil stain from car seat

The most effective way to remove a fresh oil stain from a car seat is to act quickly using a multi-step process involving absorption, a targeted degreaser, and blotting—never rubbing. For fabric seats, a paste of baking soda and dish soap is highly effective, while leather and vinyl require a dedicated leather cleaner to avoid damage. The key is to break down the oil without spreading it or harming the seat material. Start by blotting up any excess oil with a clean, dry cloth or paper towels. If the stain is fresh, sprinkle a generous amount of cornstarch or baking soda over it to absorb the oil. Let it sit for 15-20 minutes, then vacuum it up. For fabric seats , create a cleaning paste by mixing a few drops of dish soap (like Dawn, known for its degreasing properties) with baking soda. Apply this paste to the stain and gently agitate it with a soft-bristled brush. Let it sit for another 15 minutes. Then, using a damp cloth, blot the area repeatedly to lift the paste and the dissolved oil. Repeat if necessary, and allow the seat to air dry completely. For leather or vinyl seats , never use dish soap as it can strip natural oils. Instead, use a commercial leather cleaner specifically designed for automotive interiors. Apply the cleaner to a microfiber cloth and gently wipe the stained area. Always follow up with a leather conditioner to keep the material supple. The effectiveness of different methods can vary based on the stain's age and the seat material. Here’s a quick comparison: Cleaning Method Best For Material Stain Age Key Advantage Potential Drawback Dish Soap & Baking Soda Paste Fabric Fresh to Medium Highly effective degreaser, low cost Can leave residue if not rinsed well Commercial Degreaser Spray Fabric Set-in/Heavy Powerful, designed for tough stains Harsh chemicals may damage some fabrics Cornstarch Absorption All Fresh Safe, non-abrasive first step Only effective on surface oil Rubbing Alcohol Fabric Medium Evaporates quickly, good for grease Can discolate some dyes Automotive Leather Cleaner Leather/Vinyl All pH-balanced, safe for material Higher cost than household products If the stain persists after these efforts, consulting a professional automotive detailer is your best bet. They have industrial-strength extractors and cleaners that can tackle set-in stains without risking damage to your car's interior.
110
Share

how to remove paint transfer from car

You can effectively remove paint transfer from your car's clear coat using a combination of clay bar treatment, polishing, and for deeper cases, a light compound. The key is to start with the least aggressive method to avoid damaging your car's factory clear coat. Paint transfer occurs when paint from another object (like a parking lot pole or another car) rubs off onto your vehicle's surface without necessarily causing a deep scratch. Assess the Damage First Run your fingernail gently over the mark. If your nail doesn't catch on a deep groove, the foreign paint is likely sitting on top of your clear coat, which is good news. This means it can be removed without a full repaint. Step-by-Step Removal Process Thorough Wash: Start by washing the affected area with car shampoo to remove any loose dirt or grit. This prevents you from grinding contaminants into the paint during the next steps. Clay Bar: This is your first and often most effective line of defense. Lubricate the area with a dedicated clay lubricant or diluted car wash solution. Gently glide the clay bar back and forth over the transfer. The clay will pull the embedded contaminants and the transferred paint out of the clear coat's pores. Polish: After claying, you may still see a faint stain. Use a fine-grade automotive polish and a microfiber applicator pad (or a dual-action polisher for larger areas) to gently abrade the surface and remove the remaining residue. This will also restore gloss. Compound (If Necessary): For more stubborn transfer, a rubbing compound is more abrasive than polish. Use it sparingly and by hand if possible, as it removes a fine layer of clear coat. Always follow compounding with polishing to restore clarity. Protect: Once the surface is clean, apply a sealant or wax to protect the freshly exposed clear coat. Method Best For Effectiveness Risk to Clear Coat Required Effort Clay Bar Light, fresh transfer High Very Low Low to Moderate Hand Polishing Moderate stains after claying High Low Moderate Machine Polishing Large areas or stubborn transfer Very High Medium (if done incorrectly) High Rubbing Compound Deeply embedded transfer Very High High High Lacquer Thinner* Small, very stubborn spots Extreme Very High (can dissolve clear coat) Extreme Caution *Use lacquer thinner only as a last resort on a small, inconspicuous area, wiping it off immediately.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.