···
Log in / Register

Under what circumstances does the car cooling fan operate?

1Answers
MacJonathan
08/29/2025, 03:33:43 AM

When the coolant in the radiator reaches a certain temperature (around 95 degrees Celsius), the thermal switch will control the activation of the radiator fan. Here are the specific details about the car cooling fan: 1. The operation or shutdown of the car cooling fan is controlled by the thermal switch located on the radiator. 2. When the coolant temperature reaches a higher level, the thermal switch will increase the fan speed. Once the coolant temperature drops to a certain level, the radiator fan will automatically turn off. 3. The car radiator cooling fan operates automatically and cannot be manually controlled. It does not activate at low temperatures. For medium and high temperatures, there are two speed settings: typically, the medium speed activates automatically at 95 degrees Celsius, and the high speed activates at 105 degrees Celsius.

Was this review help?
106
Share
More Q&A

How often should the engine be started when a car is parked for a long time?

When a car is parked for a long time, the engine should be started once a week and allowed to idle for a few minutes. This is because when a car is not started for an extended period, most of the lubricating oil that should adhere to the lubrication components will flow back to the oil pan due to gravity, reducing the lubrication effect on various moving parts. Without the protection of an oil film, metal can easily react with oxygen to form an oxide film, increasing friction and making it difficult to start the engine. Automotive engines can be divided into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines. Common gasoline and diesel engines are reciprocating piston internal combustion engines, which convert the chemical energy of fuel into the mechanical energy of piston motion and output power externally.
117
Share

What does vehicle sealing registration mean?

Vehicle sealing registration refers to a guarantee measure where vehicles purchased through loans or requiring partial capital mortgage are prohibited from being transferred. The sealing registration fees incurred from car loans obtained through regional banks or financial credit institutions are refundable. Meanwhile, requirements vary among different regional financial credit institutions. There are three methods of sealing registration: 1. Installment payment vehicles: For cases of defaulting on bank payments, the bank applies to the court for debt collection, and the court issues a sealing notice to the vehicle management office, prohibiting all services including inspection. 2. Fully paid vehicles: When the vehicle owner owes debts, creditors may apply to the court to first seal the vehicle for preservation, then determine ownership through judgment. 3. Vehicles used by criminals for committing crimes or purchased with illicit money: To recover the vehicle, the public security bureau may seal it, prohibiting inspection, transfer, and other services.
113
Share

Is the owner or the driver penalized for traffic violations?

Traffic violations are penalized against the driver, not the owner. Additional extended information is as follows:1. Reversing, driving in the opposite direction, or making a U-turn across the central divider on a highway: 12 demerit points.2. Speeding exceeding 50% above the speed limit: Changed from 6 to 12 demerit points.3. Drunk driving: In addition to demerit points, drunk driving results in a 6-month license suspension, while driving under the influence leads to license revocation, criminal liability, and a 5-year ban on reapplying for a driver's license.4. Failure to display, forging, altering, improperly installing license plates, or intentionally obscuring or damaging license plates: There are clear and detailed standards for license plate installation. If the license plate is not installed in compliance with regulations, a penalty of 12 demerit points will be imposed.
101
Share

What engine is used in the BAIC Zhida X3?

BAIC Zhida X3 is equipped with 1.5L and 1.5T engines. The engines of this model are domestically produced, with the model code A151E, jointly developed by BAIC in collaboration with Mitsubishi and Mercedes-Benz. The 1.5L engine delivers 116 horsepower and a torque of 146 Nm, meeting the China V emission standard; the 1.5T engine produces 150 horsepower and a torque of 210 Nm, complying with the China VI emission standard. The Zhida X3 comes standard with Bosch's ninth-generation ESP body stability system, along with active safety features including hill start assist, traction control system, front seat airbags, rear parking radar, and tire pressure monitoring. It also offers optional front side airbags and curtain airbags, as well as a panoramic imaging system.
115
Share

Reasons for Brake Noise in GAC Trumpchi GS4

The reasons for brake noise in GAC Trumpchi GS4 are: 1. New car or recently replaced brake discs and pads; 2. Normal activation of the ABS system; 3. Presence of metal hard spots on the brake pads; 4. Severe wear of the brake pads; 5. Severe wear of the brake discs; 6. Improper installation of the brake pads; 7. Brake caliper not returning to position; 8. Noise caused by the brake caliper moving upward due to friction and hitting the upper bracket. In terms of the chassis of the GAC Trumpchi GS4, it was developed under the leadership of Marco, the Chief Technology Officer of GAC Research Institute and a master in chassis tuning with over 30 years of experience. It features three steering modes: Comfort, Standard, and Sport, with a braking distance of 37.58 meters and a turning radius of 5.5 meters.
105
Share

Do You Have to Replace Both Headlights If One Is Broken?

You can replace just one headlight if it is broken. Below is an introduction to the types of car lights: 1. Headlights: Combined headlights are located at the front of the car and primarily serve lighting and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe driving at night. Combined headlights can be categorized by light source into halogen lamps and xenon lamps, and by function into low beams, high beams, front turn signals, position lights (also known as width markers, indicating the vehicle's presence), and front fog lights. Fog lights are not mandatory by national regulations, but most vehicle models are equipped with them. 2. Combined taillights: Located at the rear of the car, they mainly serve lighting and signaling purposes. Taillights generally consist of rear position lights, reverse lights, brake lights, rear fog lights, rear turn signals, and reflectors. 3. Turn signals: Used to indicate left or right turns to other road users. Regulations require them to be amber. 4. License plate lights: These primarily illuminate the license plate, making it easier to identify the vehicle's license plate at night.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.