···
Log in / Register

The Difference Between 1.2t and 1.4t

1 Answers
JasmineFitz
08/28/25 2:16am

Here are the specific differences between 1.2t and 1.4t: 1. Power performance: The 1.2t engine is relatively weak at startup but performs well in the latter half of acceleration. The 1.4t engine has strong starting power. 2. Performance: The new generation Volkswagen Sagitar uses 1.2t and 1.4t engines respectively. The 1.2t engine has a maximum power of 85kw, a maximum torque of 200 Nm, a top speed of 200km/h, and a 0-100km/h acceleration time of 11.2 seconds. The 1.4t engine has a maximum power of 110kw, a maximum torque of 250 Nm, a top speed of 220km/h, and a 0-100km/h acceleration time of 9.3 seconds. 3. Comparison: When driving on the highway, the power performance of the 1.4t engine is very noticeable. Whether driving in the city or on the highway, the 1.4t engine provides sufficient power. The 1.2t engine is relatively weaker in power.

Was this review help?
19
1
Share
More Forum Discussions

What is the standard tire pressure for the Geely Vision S1?

The standard tire pressure for the Geely Vision S1 is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data is based on the international GBT2978-2008 standard. The Vision S1's tire pressure monitoring system can be viewed by switching the dashboard interface to check and confirm whether the tire pressure is normal. If there are any issues, adjust it to the standard tire pressure. Generally speaking, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern of the tire, shortening its lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increases friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire parts, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, causing damage to the bead area and abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes at the bottom, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Usually alerts when below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system records the previous data, causing the indicator light to come on. Simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the inflation valve. If the sensor is damaged during driving, the tire pressure warning light will come on. For sensor damage, the only solution is to replace it with a new one.
19
5
Share

Can the Steering Wheel Clock Spring Be Repaired?

Steering wheel clock spring damage can be repaired. It may cause the horn to stop working, the airbag warning light to illuminate, and the steering wheel control buttons to malfunction. The clock spring is a ring-shaped component that connects the airbag. Its design ensures that current continues to flow into the airbag while it rotates with the steering wheel, and the internal wires won't break due to frequent twisting from rotation, guaranteeing the airbag functions properly at all times. Below is relevant information about the steering wheel clock spring: Introduction: Also known as a spiral cable, it is installed beneath the steering wheel and serves as a crucial component connecting the electrical devices on the steering wheel to those on the steering column. It mainly consists of flexible flat cables, relatively rotating housings, wire harnesses (conductive lead wires), connectors, and a neutral pin. Consequences of clock spring damage: The airbag may become inoperable, and if accidentally grounded, it could even deploy unintentionally. If the clock spring is damaged, it should be repaired immediately; otherwise, it may lead to airbag failure, posing a significant safety hazard to the vehicle. In the event of a collision, the airbag might fail to deploy.
18
5
Share

Odyssey or Elysion, Which One to Choose?

If you have higher requirements for handling and configurability, you may opt for the Elysion. The differences between the Elysion and the Odyssey are as follows: 1. Exterior: The Elysion features a very avant-garde design, with a horizontal grille and sharp LED lighting, which performs exceptionally well in illumination. The front fascia differs slightly from the Odyssey and includes a vehicle lighting assistance system for automatic light switching, eliminating blind spots for the driver. The Odyssey's appearance is smoother and more refined overall, with a conservative design that aligns with Chinese aesthetic preferences. It lacks the avant-garde and aggressive styling of the Elysion. The Odyssey has undergone significant changes, such as replacing the old side-swing doors with sliding doors in the current model. 2. Interior: The Elysion boasts a very rich array of interior features. While the steering wheel specifications are the same, the Elysion has more multifunction buttons than the Odyssey, making it more convenient for the driver to operate. The Elysion excels in this aspect, with a strong emphasis on luxury, featuring large wood-grain interior panels that exude a sense of prestige. In contrast, the Odyssey's dashboard does not emphasize technological effects as much as the Elysion, and its configuration is slightly inferior. It lacks the wood-grain panels found in the Elysion, making it appear less upscale in terms of grade.
1
1
Share

What are the differences between the Accord 9.5 generation and the 9th generation?

The differences between the Accord 9.5 generation and the 9th generation are: 1. Different headlight light sources: The headlights of the 9th generation Accord emit granular light, while the 9.5 generation Accord's headlights emit strip-shaped light. Additionally, the 9.5 generation's light source is brighter and has a longer range. 2. Different power: The 2.0L naturally aspirated engine in the 9.5 generation Accord 2.0 Luxury version has a maximum power of 114 and a maximum torque of 190, and it uses multi-point fuel injection, which is less prone to carbon buildup compared to direct injection engines. 3. Different models: The 9.5 generation Accord 2.0 Luxury version features a multi-link independent rear suspension, providing better comfort for rear passengers. 4. Different configurations: The 9.5 generation Accord 2.0L Luxury version is equipped with ESP, tire pressure monitoring, auto hold, hill start assist, and rear parking sensors, which are not available in the 9th generation Accord. 5. Different appearance: The chrome area on the front grille of the 9.5 generation Accord is smaller, giving it a more refined look.
8
4
Share

Is It Harmful for a New Car to Reach 3000 RPM?

Engine speed and gear matching do not harm the engine. Below is relevant information about engines: Definition: An engine (Engine) is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. Engines can refer to both the power generation device and the entire machine including the power unit (e.g., gasoline engines, aircraft engines). The engine was first developed in the UK, so the concept of the engine also originates from English, with its original meaning referring to a "mechanical device that generates power." External combustion engine: This means its fuel burns outside the engine, invented in 1816 by Scotland's R. Stirling, hence also known as the Stirling engine. The engine converts the thermal energy generated by this combustion into kinetic energy. The steam engine improved by Watt is a classic example of an external combustion engine. When a large amount of coal burns to produce thermal energy that heats water into a large amount of steam, high pressure is generated. This high pressure then drives mechanical work, thereby completing the conversion of thermal energy into kinetic energy.
11
4
Share

What does mandatory scrapping of vehicles at 600,000 kilometers mean?

Mandatory scrapping of vehicles at 600,000 kilometers means that after a vehicle has traveled 600,000 kilometers, it can no longer be driven on the road and must be sent to an automobile dismantling facility for destruction and scrapping. The latest 2021 vehicle scrapping regulations: the previous limitation on the service years of non-commercial passenger cars has been abolished, while the scrapping mileage limit for private cars has been set at 600,000 kilometers. New vehicles are exempt from inspection for the first 6 years, vehicles used for 6-15 years must undergo annual inspections, and vehicles used for over 15 years must be inspected twice a year. As long as the vehicle passes the annual inspection, it can continue to be driven on the road. Precautions for vehicles without annual inspection: Accident liability: For any traffic accidents caused by vehicles that have not undergone the annual inspection on time, the involved party will bear full or primary responsibility, and the insurance company will not be liable. This is because the insurance policy specifies that vehicles with expired inspection are among the objects for which claims are denied. Mandatory scrapping: According to the 'Mandatory Scrapping Standards for Motor Vehicles,' if a motor vehicle fails to obtain the inspection compliance mark for three consecutive inspection cycles after the expiration of its inspection validity period, it will be subject to mandatory scrapping.
5
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.