Should the Oil Pan Be Replaced When Changing Transmission Oil for BMW?

1 Answers
Barbosa
07/29/25 1:51pm
When changing the transmission oil for a BMW, the oil pan should be replaced because there is a filter screen attached to the inner side of the oil pan. The filter screen cannot be removed and can only be cleaned. If not replaced, it will cause the viscosity of the transmission oil to increase over time. Transmission Oil Replacement Interval: Generally, it should be replaced every 40,000 to 60,000 kilometers. For automatic transmission oil, it is recommended to replace it every 60,000 kilometers. Symptoms of Dirty Transmission Oil: If you notice increased fuel consumption, sluggish acceleration, or delayed gear shifting while driving, it is advisable to perform maintenance. Consequences of Not Changing Transmission Oil: The transmission oil may contain a lot of iron powder and debris, which significantly reduces the lubrication performance of the transmission, leading to severe wear. For most vehicle models, this situation occurs if the transmission oil is not changed for over 100,000 kilometers, so replacement is recommended.
Was this review help?
6
1
Share
More Forum Discussions

What are the differences between imported and domestically produced Outlanders?

Here are the specific differences between imported and domestically produced Outlanders: 1. Curb weight: The imported Outlander has a curb weight of 1585kg, while the domestically produced Outlander weighs 1440kg. 2. Displacement: The imported Outlander has a displacement of 2.4L, whereas the domestically produced version has a 2.0L displacement. 3. Power: The imported Outlander has a maximum horsepower of 192ps, maximum power of 141kw, and maximum torque of 235nm; the domestically produced Outlander has a maximum horsepower of 166ps, maximum power of 122kw, and maximum torque of 201nm. 4. Tire specifications: The imported Outlander uses 225/55R18 tires, while the domestically produced version uses 215/70R16 tires.
12
0
Share

What is the name of the Geely-Volvo joint venture brand?

Geely-Volvo joint venture brand is called Lynk & Co. Here is some information about Lynk & Co: 1. Lynk & Co SUVs: Current SUV models include Lynk & Co 01, Lynk & Co 02, sedan model Lynk & Co 03, and PHEV models. The CMA vehicle architecture is led by Volvo Cars and jointly developed with Geely Auto, originating from Geely Auto's European R&D center. 2. Overview of Lynk & Co: Lynk & Co is a new-era premium brand jointly created by Geely Auto and Volvo Cars, headquartered in Berlin, Germany. The brand was officially launched on October 20, 2016.
15
4
Share

How to Use Tar Remover Without Damaging the Paint?

Prepare a bottle of tar and resin remover. The resin remover can easily wipe off tar from the car body without harming the paint. Spray the resin remover onto the tar stains on the car body. Use a clean cloth to wipe the car body surface, and the tar stains can be easily removed at this point. The tar on the car body will be cleaned very thoroughly.
9
0
Share

How to Deal with Fogging Inside the Car in Winter?

Solutions for fogging inside the car in winter are as follows: Methods to remove fog from car windows include: 1. Use the car's air conditioning to defog: Fogging occurs due to the temperature difference between the inside and outside of the car. Turning on the air conditioning to reduce this temperature difference can help eliminate the fog. 2. Use the external circulation to defog: If the fog is not heavy and it's not too cold outside, you can slightly open the side windows to allow air convection inside the car, which helps disperse the moisture and remove the fog. However, this method is not recommended for use on highways.
16
4
Share

What to Do When a Car Won't Start in Winter?

Reasons and solutions for difficulty starting in cold weather are as follows: 1. Battery charge issue: Due to battery plate shedding or incorrect acid-base balance ratio, the battery may not hold enough charge. Solution: Regularly check the battery. If the battery has been completely drained more than twice, it is recommended to replace it with a new one. 2. Carbon deposits: Long-term driving in low temperatures, poor gasoline quality, prolonged vehicle use, or oil burning can easily lead to carbon buildup. Solution: Use professional gasoline additives designed to clean carbon deposits. 3. Frozen exhaust pipe or excessive valve carbon deposits: Solution: Drive on the highway every weekend in winter to use strong exhaust force to promptly remove accumulated water in the exhaust pipe. 4. Restricted oil flow: Solution: Visit a specialized shop for professional winter maintenance and replace the oil with a suitable type based on local conditions.
7
2
Share

How to Use Bluegogo Bikes?

Find bikes via the app and reserve nearby bikes in advance. Use navigation to locate the bike, and ring the bell when near the bike for precise positioning. Scan the QR code on the bike to unlock and start your ride. Check your current location, ride duration, and cost. Park the bike in designated public bike parking areas, and the bike will automatically lock when you end your ride.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.