···
Log in / Register

Should Left-Turning Vehicles Yield to Straight-Going Vehicles?

1Answers
JaxonLynn
07/24/2025, 11:02:32 PM

Left-turning vehicles should yield to straight-going vehicles. The situation where straight-going vehicles yield to turning vehicles applies to secondary roads yielding to main roads: In urban areas, the traffic volume on main roads is relatively high. Generally, main roads have priority. Therefore, if the secondary road is a straight lane and the main road involves turning vehicles, vehicles on the secondary road should yield to turning vehicles on the main road. If an accident occurs due to the secondary road vehicle not yielding, the secondary road vehicle, even if going straight, will bear full responsibility. Intersections with yield signs: These signs are usually placed at the junctions between secondary roads and main roads. Their primary purpose is to remind secondary road vehicles to yield to turning vehicles on the main road. Yield signs are further divided into two types: stop signs and slow-down signs. If a driver encounters a yield sign at an intersection, they must observe the main road traffic and only proceed into the intersection after confirming it is safe.

Was this review help?
118
Share
More Q&A

Which Gear to Use for Long Downhill in Automatic Transmission?

When driving down a steep slope with an automatic transmission, you should shift into the L gear, which is the low gear. After engaging this gear, the vehicle will have higher RPM and stronger traction, and the speed will also be reduced. This helps to control the car's speed and provides some assistance when descending steep slopes. Automatic transmission cars can also be switched directly to manual mode when going down long slopes. Since the car will accelerate automatically when going downhill, it is essential to reduce the speed, especially on long or steep slopes. Controlling the speed can prevent the vehicle from losing control, as excessive speed can be very dangerous. When reducing speed, avoid frequent use of the brakes, as this can cause them to overheat and lead to brake failure. Instead, use engine braking when necessary. On steep slopes, never use the D gear when descending. Also, adopt the correct method when parking, such as avoiding prolonged braking, which can increase the gap between the brake discs and pads, reduce the efficiency of the braking system, and potentially cause brake failure. Instead, apply gentle and repeated light braking.
114
Share

What are the key points for Subject 2 of the driving test?

License Subject 2 exam has the following difficult key points: Reverse Parking: Widely considered the hardest part of Subject 2, its difficulty lies in mastering the timing of steering wheel turns. Hill Start: Rollback and stalling are common issues during hill starts. If the vehicle shows signs of rolling back while releasing the brake, immediately press both brake and clutch firmly to stabilize the car, then restart using the same method. 90-degree Turn: There are multiple approaches for 90-degree turns. The simplest method is to fully turn the steering wheel when the hood covers the opposite yellow line.
107
Share

Does the Tayron have a manual transmission?

Tayron does not have a manual transmission, all models are equipped with a 7-speed dual-clutch transmission. The following are the differences between automatic and manual transmissions: Different operation difficulty: Manual transmissions mainly rely on the driver stepping on the clutch to complete gear changes. Manual transmission cars allow drivers to better experience the thrill of climbing hills, accelerating, and the joy of driving. Automatic transmissions mainly rely on the hydraulic transmission principle of the torque converter to automatically complete gear changes. Different safety levels: Although coasting in neutral with a manual transmission saves fuel, the car loses power, especially during turns, which can lead to risks such as understeer and tail flicking. Additionally, if the engine stalls at idle, the car will lose steering assistance and braking, increasing safety hazards during driving. Automatic transmission cars, since they cannot be driven in neutral, always maintain power support throughout the journey, making this driving method safer.
112
Share

Will a motorcycle be automatically deregistered if it hasn't undergone annual inspection for three years?

Motorcycles that haven't undergone annual inspection for three years will be automatically deregistered. Motorcycle annual inspection schedule: The annual inspection schedule for motorcycles is based on the purchase date. New motorcycles only require inspection every 2 years within the first 4 years of purchase, while those over 4 years old need annual inspection. For the inspection, you just need to drive the motorcycle and bring the original owner's ID card, original vehicle registration certificate, tax payment certificate for vehicle and vessel tax, and compulsory insurance policy to a qualified local institution to complete the annual inspection. Motorcycle annual inspection location: Motorcycles should undergo annual inspection at the vehicle management office in their registration location (where the license plate was issued). Motorcycles require inspection every 2 years within the first 4 years, and annually thereafter.
103
Share

How Does a Manual Transmission Work?

Manual transmission consists of gear sets with different gear ratios. Its basic working principle is to achieve gear ratio changes by switching between different gear sets. Introduction to manual transmission: A manual transmission is a gear-shifting device used to alter the speed and torque transmitted from the engine to the driving wheels. It enables the vehicle to obtain varying traction and speed under different operating conditions such as starting from a standstill, climbing hills, turning corners, and accelerating, while also allowing the engine to operate within a more favorable range. Maintenance of manual transmission: If mineral-based gear oil is used in the transmission, the transmission fluid should be replaced every 3 years or 60,000 kilometers. If synthetic oil is used, the transmission fluid should be inspected regularly. For cleaning the transmission, it is recommended to visit a professional repair shop equipped with specialized transmission cleaning devices to ensure optimal fluid replacement during transmission operation.
117
Share

What are the effects of overfilling engine oil in a truck?

The adverse effects of overfilling engine oil in a truck are as follows: 1. Increased fuel consumption and reduced power: If too much lubricating oil is added, intense agitation will occur among engine components during operation, leading to increased internal power loss. The elevated oil level also increases oil churning losses as the crankshaft encounters greater resistance, resulting in poorer power output, sluggish acceleration response, louder engine noise, and higher fuel consumption. 2. Decreased engine power: Excessive oil entering the combustion chamber significantly increases carbon deposits, raising piston movement resistance and reducing engine power. 3. Failed emission standards: Increased oil entering the combustion chamber worsens exhaust emissions, potentially damaging the catalytic converter in severe cases. 4. Oil leakage: Vigorous oil agitation raises crankcase pressure, accelerating the aging and deformation of crankshaft oil seals, eventually causing oil seepage and shortening lubricant service life.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.