···
Log in / Register

Must Motorcycles Always Keep to the Right?

1Answers
AlanLynn
09/08/2025, 12:09:39 AM

Motorcycles must always keep to the right. If there is a dedicated motorcycle lane, they should travel within that lane. If there is a non-motorized vehicle lane on the far right of the road, motorcycles are not allowed to use it and must stay on the far right side of the motor vehicle lane. Additionally, motorcycles should not cross the road arbitrarily. If the road ahead is blocked, they are allowed to temporarily use another lane but must return to the far right lane immediately after passing. Regulations for motorcycle operation: The rear seat of a motorcycle must not carry children under 12 years of age, and lightweight motorcycles are not allowed to carry passengers. Passengers on two-wheeled motorcycles should sit astride the seat facing forward. On highways, motorcycles must not exceed 80 kilometers per hour. Both the driver and passengers must wear safety helmets as required by regulations. Common knowledge for safe motorcycle riding: Motorcycles should keep to the right and must not ride on sidewalks. Maintain a safe distance from the vehicle in front, staying slightly to the right rear of the lead vehicle. Avoid sudden acceleration and braking to prevent emergencies. Always slow down when turning, as excessive speed can cause loss of balance. In rainy conditions, reduced road friction increases braking distance, so reduce speed accordingly. At night, visibility is limited, so ride at a slower speed. If any abnormalities are noticed while riding, stop immediately to inspect the motorcycle. Never race with cars; always follow traffic laws, prioritize safety, and yield to pedestrians.

Was this review help?
113
Share
More Q&A

Which province does the Qing license plate belong to?

Qing license plate belongs to Qinghai province. More information about license plates is as follows: 1. License plates are used for vehicle numbering and information registration. Their main purpose is to identify the vehicle's region of registration, and they can also be used to look up the vehicle's owner and registration details. 2. Vehicle license plates serve as the 'ID card' of a vehicle, providing crucial information to distinguish it from other motor vehicles. With the rapid increase in the number of vehicles, license plates have undergone significant changes. Advances in technology have led to higher demands for intelligent license plates and stricter management.
112
Share

How to Reset the Tire Pressure Light on a BMW 3 Series?

BMW 3 Series tire pressure light reset method: Restore all four tires to standard pressure, then press and hold the tire pressure reset button next to the gear lever to eliminate the tire pressure light. The following introduces the solution after the tire pressure warning light comes on: 1. Carefully reduce the speed to below 80 km/h, avoid severe braking and steering, and do not let the speed exceed 80 km/h again. 2. Check the inflation pressure of all tires as soon as possible. If the tire inflation pressure of all four tires is normal, there is no need to initialize the tire pressure display, but the system needs to be initialized.
120
Share

What transmission was used in the previous generation rear-wheel-drive X1?

The previous generation rear-wheel-drive X1 used two types of transmissions, one was a 6AT transmission, and the other was an 8AT transmission. More information about rear-wheel-drive cars is as follows: 1. Lower manufacturing cost. Fewer and more centralized components. This makes other parts of the car, such as the braking system, oil lines, and exhaust system, easier to arrange in the lower part of the car. 2. Reduced weight. With the same displacement and horsepower, the lighter the car's own weight, the easier it is to accelerate, the shorter the braking distance, and the more fuel-efficient it is. The weight of the engine and drive axle is loaded on the front wheels as the driving wheels, which helps improve the car's traction, which is very beneficial on slippery roads.
112
Share

What is the minimum ground clearance of the Octavia Combi?

The minimum ground clearance of the Octavia Combi is 150mm when unloaded and 125mm when fully loaded. For the domestically produced Octavia Combi, the minimum ground clearance is 145mm when unloaded and 120mm when fully loaded. Here are some relevant details: 1. The new generation Octavia is produced on Volkswagen Group's new transverse modular platform, the MQB chassis. In terms of exterior dimensions, the car length reaches 4659mm (90mm longer than the current model), the width is 1814mm (45mm wider than the current model), and the wheelbase extends to 2686mm (108mm longer than the current model). 2. The larger body size also brings a larger trunk capacity. With the help of the large-opening luggage compartment, the trunk volume reaches 590 liters, which is a full 30 liters more than the existing model.
104
Share

What is the difference between tubeless tires and tube tires?

The difference between the two is: tubeless tires do not have an inner tube, while regular tires do. More knowledge about tubeless tires is as follows: 1. Tubeless tires, also known as "low-pressure tires" or "pneumatic tires," are inflatable tires without an inner tube. They have high elasticity and wear resistance, as well as good adhesion and heat dissipation performance. 2. Tubeless tires have been increasingly used in bicycles, motorcycles, cars, buses, and trucks in recent years. They are promoted to the logistics and transportation industry by the National Economic Commission and the National Tire Association. 3. The tire body is relatively soft, while the outer tread is more rigid. The middle cord layer strengthens the tire body and maintains its shape, often reinforced with metal wires to improve the tire's elastic performance.
111
Share

Can You Drive with a Flat Tubeless Tire?

Tubeless tires cannot be driven when flat, as this will cause tire damage. Tires are a crucial component of a vehicle and the only part that makes contact with the road. The condition of the tires directly affects the vehicle's driving stability and safety. Below is an introduction to the functions of tires: 1. Tires act as the medium for transmitting forces between the vehicle and the road surface: They transmit driving force, braking force, steering force, etc., enabling operations such as driving, braking, and steering. 2. Supporting the vehicle load: The vehicle's weight causes the tire to compress until the average pressure on the contact area balances with the internal inflation pressure. 3. Absorbing and dampening vibrations and impacts during driving: This prevents early damage to vehicle components caused by severe vibrations, while also adapting to high-speed driving conditions, reducing noise, and ensuring driving safety, comfort, handling stability, and fuel efficiency.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.