···
Log in / Register

Just replaced the windshield, it's raining, will it be affected?

6Answers
DiIan
07/28/2025, 02:17:31 AM

If it's short-term rain, it won't have much effect on the windshield. However, if the rain is heavy and prolonged, there may be some impact. If the glass adhesive hasn't fully dried, it could lead to poor bonding. It's best to avoid the rain promptly or visit a repair shop for an inspection after prolonged exposure to rain. Here are some additional details: 1. Windshield: A windshield consists of two layers of glass with a PVC plastic layer in between. If it has been repaired after cracking, try to keep the speed below 80 km/h for the first 48 hours, avoid bumpy roads, sudden braking, or car washing, and refrain from opening the windows while driving for the first three days to prevent displacement due to wind. 2. Daily maintenance: Regular maintenance of the windshield is also important. First, check the wipers periodically, as they can be a factor in windshield damage. Worn-out wipers can scratch the glass. Also, clean off bird droppings promptly, as they can be corrosive. Lastly, choose high-quality films, as low-quality ones not only provide little benefit but also increase safety risks.

Was this review help?
115
Share
SamanthaDella
08/11/2025, 10:26:27 AM

I've driven many cars, and replacing the windshield on a new car is quite common. If it rains right after the replacement, you really need to be careful. The adhesive used during installation takes over a day to fully dry. If rainwater directly washes over it, it might affect the curing of the adhesive, and in severe cases, it could lead to leaks. The area beneath the windshield might get damp, affecting driving visibility. I remember last time after replacing my windshield, when it rained, I quickly parked my car in the garage or under a shelter to avoid the rain. Installers usually recommend avoiding exposure to rain or car washes for 24 hours. If you notice water droplets seeping into the car after rain, it's best to call the repair shop immediately for a check-up—they might reinforce it for free. During regular car maintenance, also pay attention to the sealing strips around the edges of the windshield to check for cracks or looseness, so you can spot issues early. In short, being cautious never hurts—safety comes first when driving.

Was this review help?
5
Share
Expand All
DiSamuel
09/27/2025, 04:06:41 AM

As a car enthusiast, I always pay attention to these details. Just after replacing the windshield, encountering rain can actually be a testing opportunity. Rainwater itself is harmless to the glass, but if the installation process is not done properly and the adhesive seams are not tightly sealed, rainwater can easily leak into the cabin, causing the dashboard or carpets to get wet, or even leading to short circuits and rust. The adhesive used after installation requires 24 hours to cure. During this period, a few raindrops are not a big issue, but heavy rain should be avoided to prevent the new adhesive from being washed away. I would observe the car and spray some water along the edges of the glass to test for leaks. If there are no leaks, it indicates good installation quality. Additionally, don’t forget to check if the rearview mirror and wipers are functioning properly, as replacing the glass might affect the positioning of these components. Maintaining regular maintenance habits can save you trouble. It’s advisable to contact the original installer as soon as possible to confirm whether the adhesive has fully dried.

Was this review help?
6
Share
Expand All
LaCameron
11/10/2025, 10:18:12 PM

Just had the windshield replaced and it started to rain. Initially, I wasn’t sure about the impact, but after some research, I learned that rainwater itself doesn’t damage the glass. If the installation was done professionally and the adhesive seal is secure, light rain shouldn’t be a problem. However, if the adhesive hasn’t fully cured, water might seep into the gaps, leading to leaks inside the car, which could affect electrical wiring and seat comfort. Personally, I think safety comes first—after the rain, quickly check the edges of the windshield for any watermarks or droplets. If there are none, you’re good. If you find any leaks, don’t try to fix them yourself, as it might make things worse; instead, get a professional to handle it. Developing a habit of observing these details during daily driving can help prevent worse malfunctions.

Was this review help?
6
Share
Expand All
LilaAnn
01/01/2026, 12:05:07 AM

I've had my windshield replaced twice. I remember the first time it happened to be raining, which made me quite nervous. The installer told me that the new adhesive needs two days to fully cure before it's waterproof. Rainwater itself won't damage the glass, but if the seal isn't tight, it might leak into the car, wetting the floor mats or corroding metal components. After that rain, I tested by spraying water around the edges of the glass and found no leaks, indicating a proper installation. Since then, I've always parked my car under cover for a few days after each windshield replacement. I'd suggest you do the same—check the weather forecast in advance and park in a sheltered spot if rain is expected. If you do notice a leak, don't delay; return to the installation shop for a free warranty check, and you can also have them inspect the wiper blade fit while you're there. Developing this habit has saved me a lot of hassle down the road.

Was this review help?
4
Share
Expand All
VanTaylor
03/29/2026, 01:29:00 AM

From a cost-saving perspective, having rain right after windshield replacement relates to long-term maintenance expenses. Rain itself doesn't damage the glass, but if installation isn't tight and water seeps into the vehicle chassis or electrical systems, it may cause major issues like rust or short circuits. Avoid heavy rain washing before the adhesive fully dries - light rain is fine for observation. I'd check during rain if the glass edges feel slippery or show water droplets seeping in; if so, promptly return to the original installer for re-inspection to prevent small leaks becoming costly repairs. Regular maintenance should include checking sealant tape aging - early detection and replacement saves hassle; also test wiper efficiency on sunny days since post-replacement alignment might affect clarity. Ultimately, prevention extends service life.

Was this review help?
5
Share
Expand All
More Q&A

How to Renew a Six-Year-Old Driver's License in a Different Location?

C1 driver's licenses can be renewed in a different location after six years. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," when a driver's license is about to expire, the holder must apply for renewal at the vehicle management office where the license was issued or at any other vehicle management office outside the issuing location within 90 days before the expiration date. Below is relevant information about driver's licenses: 1. Introduction: A driver's license (full name: Motor Vehicle Driver's License), also known as a "driving license," is an official document issued by government transportation authorities to individuals qualified to drive. It is typically a card. 2. Scope: To obtain a driver's license, one must meet the minimum age requirement and pass a driving test. The license usually specifies the types of motor vehicles the holder is permitted to drive, such as motorcycles, passenger cars, trucks, buses, etc. 3. Conditions: To drive large buses, tractors, city buses, medium-sized buses, large trucks, trolleybuses, and trams; individuals aged 70 or older are not permitted to drive low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, and wheeled self-propelled machinery vehicles.
115
Share

How to Obtain a Racing Driver's License?

To obtain a racing driver's license, you can participate in training programs offered by the training department of the China Automobile Sports Federation. Upon passing the examination, you will be eligible to receive the racing license. Alternatively, you can apply for a racing license through major racing clubs or provincial/municipal automobile sports associations after completing their training and passing the required exams. Below is an introduction to the driver's license: 1. Driver's License Overview: The driver's license, also known as a "driving permit," is the official document required by law for individuals to operate motor vehicles. 2. Driver's License as a "Permit": Operating a motor vehicle requires certain driving skills. Without these skills, reckless driving can lead to traffic accidents. Therefore, individuals without a license are not allowed to drive on public roads. For those who have mastered safe driving techniques, the document that permits them to drive vehicles on the road is the "driver's license." This highlights that a driver's license is essentially a "permit." 3. Definition of a Driver's License: Internationally, a driver's license is defined as "a document issued by the competent authority permitting the holder to drive a motor vehicle." In China, the definition is: "A motor vehicle driver's license is a legal certificate issued by the administrative authorities to individuals who have learned and mastered traffic regulations and driving skills through training, and have passed the official examinations, permitting them to operate specific types of motor vehicles."
114
Share

What should the gear meshing clearance of the reducer be in mm?

The meshing clearance of the driving and driven bevel gears is generally 0.10-0.35mm for new gears, 0.70mm is allowed for overhaul, and the service limit is 1.00mm. If it exceeds the standard, appropriate adjustments can be made while ensuring normal meshing. Below are some introductions about the driving and driven bevel gears: 1. Non-adjustable: The contact surface and backlash of the driving and driven cylindrical gears cannot be adjusted. During assembly, their meshing position must be symmetrical to align the two cylindrical gears. 2. Inspection of meshing clearance: After correctly adjusting the bearing clearance and the meshing position of the gears, if the backlash exceeds 0.8mm (service limit is 1.00mm), the gears should be replaced.
118
Share

How many tests are there for a C2 driver's license?

There are four tests for a C2 driver's license, namely Test 1, Test 2, Test 3, and Test 4. Below are the relevant introductions to the test contents: 1. Test 1: Road traffic safety laws, regulations, and related knowledge examination (Test 1) is a written test, answered on a computer, with a full score of 100, and a passing score of 90 or above (including 90). 2. Test 2: Field driving skills test (Test 2) is conducted on-site with an actual vehicle. It is only graded as pass or fail. The five mandatory tests, conducted in sequence, include reversing into a garage, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The full score is 100, and a passing score is 80 or above (including 80). 3. Test 3: Road driving skills test (Test 3) is conducted on a highway or simulated field with an actual vehicle. The full score is 100, with a passing score of 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Test 4: Safe and civilized driving-related knowledge (Test 4) is a written test, with a full score of 100, and a passing score of 90 or above (including 90).
117
Share

Should the Clutch Be Pressed When Braking to Slow Down?

Specific details are as follows: 1. High speed: If the vehicle speed is relatively high, there is no need to press the clutch. Simply tapping the brakes will suffice. 2. Low speed: If the speed is relatively slow, press the clutch first, then the brake; otherwise, the engine may stall. 3. Emergency braking: During emergency braking, never press the clutch, as doing so may actually increase the speed, especially when going downhill. Additional information: A manual transmission, also known as a manual gearbox, requires the driver to manually shift the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. The gear lever can only be shifted when the clutch is pressed. Although automatic transmission models are extremely popular in new car sales, manual transmission vehicles still hold appeal for a significant portion of consumers. However, even though manual transmissions are more 'durable' and have fewer faults, frequent clutch pressing and gear shifting by drivers, underestimating the difficulty of operation, can also lead to unnecessary issues.
106
Share

Can downshifting skip gears?

Yes. The specific introduction is as follows: 1. Special circumstances: Shifting step by step is not suitable for all situations. If the vehicle in front brakes suddenly and the brakes fail, shifting down one gear at a time may cause a rear-end collision. In this case, directly shifting from fifth gear to first gear and using engine braking is indeed a safer method for timely deceleration. 2. Advantages of shifting step by step: Shifting down one gear at a time allows the speed to decrease gradually. Firstly, it won't cause any damage to the car, and secondly, it minimizes the impact on passengers, providing greater comfort. Additional information: Upshifting is used when accelerating during steady driving. Shift up immediately when the speed or RPM increases, with smooth and quick movements. When decelerating, apply the brakes promptly and shift into the appropriate gear for the speed. Whether upshifting or downshifting, never look down at the RPM or gear position while shifting—this is a common mistake made by beginners. Always maintain a safe following distance and decide whether to continue upshifting or decelerate and downshift based on the situation.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.