···
Log in / Register

Is the Tiggo a domestic or joint-venture car?

6Answers
DelXavier
09/01/2025, 10:48:31 PM

Tiggo is a domestic car. The models under the Tiggo series include: Tiggo 3, Tiggo 3x, Tiggo 5x, Tiggo 7, Tiggo 8, etc. Taking the 2020 Tiggo 3 as an example, it belongs to a compact SUV with body dimensions of: length 4420mm, width 1760mm, height 1670mm, a wheelbase of 2510mm, a fuel tank capacity of 55 liters, and a curb weight of 1358kg. The 2020 Tiggo 3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 116PS, maximum power of 85kW, maximum torque of 143Nm, and is paired with a 5-speed manual transmission.

Was this review help?
108
Share
LaOscar
09/14/2025, 01:08:35 AM

I've been driving for several years and learned from friends' cars and 4S dealerships that the Tiggo is a purely domestic vehicle, not a joint venture model. Chery Automobile is a homegrown Chinese brand, entirely operated by Chinese enterprises without reliance on foreign partners, unlike joint ventures such as Volkswagen and Toyota. As Chery's flagship SUV series, the Tiggo emphasizes cost-performance with rich configurations, making it suitable for family daily use. The quality of domestic cars has improved significantly, offering convenient maintenance and affordable prices. Personally, I believe practicality and supporting domestic products are key factors when choosing a car. The Tiggo performs well in these aspects, but it's advisable to test drive before purchase to check comfort and fuel consumption against expectations.

Was this review help?
11
Share
Expand All
Petunia
10/28/2025, 01:49:48 AM

As an automotive enthusiast, I've followed the development of the Tiggo brand - it's definitely a domestic model, not a joint venture. Chery was founded in 1997 and has always been a representative of China's independent R&D. Tiggo models like the Tiggo 8 have received good market response, focusing on off-road performance and high-tech features. Compared to joint venture models like the Honda CR-V, Tiggo pays more attention to localized design with affordable pricing and high cost-performance ratio, attracting many SUV fans. Domestic vehicles have made rapid technological progress, with Tiggo showing significant improvements in both safety and intelligent systems. I recommend checking more car reviews or joining automotive forums for discussions to gain a more comprehensive understanding of its strengths and weaknesses.

Was this review help?
18
Share
Expand All
IanRose
12/11/2025, 01:05:45 AM

Tiggo is a domestic vehicle, not a joint-venture car, originating from Chery Automobile—a wholly Chinese-owned enterprise. This brand has no foreign capital involvement, so the entire vehicle's R&D and production are conducted domestically. The advantages of domestic cars lie in cost control and customized services. Tiggo performs steadily in the SUV segment, making it suitable for daily commuting and family trips. Unlike joint-venture cars with international brand backgrounds, Tiggo offers more affordable pricing and a nationwide maintenance network. When purchasing a car, personal needs and budget should be considered, and Tiggo is a worthy option to evaluate.

Was this review help?
6
Share
Expand All
AlainaLee
01/31/2026, 02:12:52 AM

As a Gen Z, the Tiggo leaves me with the impression of being a pure domestic brand, perfectly suited for us young people. It's not a joint venture but independently developed by Chery, featuring trendy designs and affordable pricing with high cost-performance. You can spot them frequently both on campuses and in cities. Domestic cars are getting cooler by the day, and Tiggo's SUV series boasts a strong sporty vibe packed with tech features. Compared to joint venture cars, domestic ones feel more down-to-earth and offer easier maintenance. If it's your first car purchase, choosing a Tiggo is a smart move—the money saved can go toward upgrading accessories or funding trips!

Was this review help?
2
Share
Expand All
DeGeorge
04/26/2026, 12:53:11 PM

From my years of experience, the Tiggo is an authentic domestic vehicle, not a joint venture. Chery, as a veteran Chinese automaker, independently operates the Tiggo brand without any foreign capital involvement. Domestic cars have made significant progress, and the Tiggo SUV performs well in terms of reliability and practicality, with simple maintenance and low costs. When choosing a car, I recommend considering user reviews and test drive experiences. The Tiggo is a solid and steady choice.

Was this review help?
14
Share
Expand All
More Q&A

How many cars can fit in a 10x20?

A standard 10x20 foot area (approx. 3x6 meters) can typically fit one mid-size sedan comfortably or up to two compact cars under tight, precise arrangements. The exact number depends directly on the vehicles' dimensions and the required access space. For reference, a common Toyota Camry is about 16 feet long, while a Honda Civic is around 15 feet, not including the buffer needed for opening doors or walking around. To determine capacity, you must calculate the total square footage (200 sq ft) and compare it to the footprint of your vehicles. A single car requires more than just its length and width; practical storage necessitates planning for maneuverability. The following table outlines how many of specific vehicle types can fit, based on average dimensions and a practical layout with minimal buffer space. This assumes vehicles are parked bumper-to-bumper and side-to-side, which is common in secured storage or parking scenarios. Vehicle Type Approx. Dimensions (L x W) Max Capacity in a 10x20 Layout Notes Mid-size Sedan (e.g., Toyota Camry) 16 ft x 6 ft 1 vehicle One car fits with space on sides and ends. Compact Car (e.g., Honda Civic) 15 ft x 6 ft 2 vehicles Two cars can fit parked side-by-side (12 ft total width) or end-to-end (30 ft total length), but not both. Side-by-side is standard, requiring careful positioning. Subcompact Car (e.g., Mini Cooper) 13 ft x 6 ft 2 vehicles Two fit side-by-side with slightly more room to spare than compact cars. Standard Pickup Truck (e.g., Ford F-150) 19-20 ft x 7 ft 1 vehicle A full-size truck will likely exceed the 20-ft length, making it unsuitable for a standard 10x20. Motorcycle 7 ft x 3 ft 3-4 vehicles Multiple motorcycles can be stored efficiently, utilizing the full floor area. For storing two compact cars, the most feasible method is to park them side-by-side. This uses roughly 12 feet of the unit's 20-foot width, leaving limited room on the sides. You would then need to pull the first car in and park the second directly beside it. This layout offers almost no walking space between the vehicles. If your goal is long-term storage for classics or seasonal vehicles, one car per 10x20 unit is the recommended industry practice . This allows for a protective perimeter, the use of ventilation and moisture control products, and safe access for maintenance or checks without risking door dings. Off-site storage facilities for automobiles often use 10x20 as a common single-car unit size. According to industry data from storage operators, over 85% of rented car storage spaces of this size house a single vehicle, emphasizing the preference for adequate space over maximum occupancy.
184
Share

Will a dead battery in the key fob cause a car not to start Mazda?

No, a dead battery in your Mazda key fob will not prevent the car from starting. Modern Mazdas with keyless start systems have a built-in backup method. The vehicle can be started by holding the dead key fob directly against the engine start/stop button. This utilizes a passive RFID chip inside the fob that does not require battery power, allowing the car's immobilizer system to recognize the key. The primary role of the key fob battery is to power the radio frequency transmitter for remote functions like locking, unlocking, and the trunk release. When the battery is depleted, these remote features will fail. However, the core immobilizer challenge function, which authorizes the engine to start, relies on a separate, low-frequency induction signal. This signal is activated when the fob is in close physical contact with the designated spot on the steering column or the start button itself. The standard procedure to start your Mazda with a dead key fob is straightforward: Enter the vehicle using the physical emergency key blade hidden within the fob. Once inside, firmly press the dead key fob against the engine start/stop button. You should feel or see a small icon (often a key symbol) on the button. With the fob held in place, press the brake pedal (or clutch for manual transmissions) and then press the start button as you normally would. The engine will start. This fail-safe design is common across major automakers. According to industry data, the typical key fob battery lifespan is 1 to 3 years , depending on usage frequency. A sudden loss of remote range is the most common early warning sign of a low battery. Feature With Healthy Fob Battery With Dead Fob Battery Remote Lock/Unlock Fully operational Not functional Push-Button Start Works from inside cabin Works only when fob is held against button Passive Entry (Touch Door Handle) Operational Not functional Engine Immobilizer Bypass Not needed Required via physical contact method Trunk Release Button Operational Not functional It's crucial to distinguish this from other starting issues. If the procedure fails, the problem likely lies elsewhere, such as a dead 12-volt car battery, a faulty starter, or issues with the vehicle's own keyless control modules. For models with a traditional physical key ignition, a dead fob battery is irrelevant to the starting process. To maintain convenience, replace the key fob battery (usually a CR2025 or CR2032 coin cell) promptly upon receiving a low-battery warning on the dashboard or noticing reduced remote range. Keeping a spare battery in the glove box is a simple, effective preventative measure.
128
Share

Can you stop car rust once it starts?

Yes, you can stop car rust from spreading once it starts, but it requires immediate and correct action. For surface-level rust or early-stage bubbling paint, a thorough DIY repair has a high success rate. However, if rust has perforated the metal creating holes, professional repair involving cutting and welding is typically necessary. The critical first step is assessing the damage. Surface rust appears as a rough, reddish-brown coating on bare metal, often under chipped paint. Scale rust is more advanced, causing the metal to pit and flake. The point of no return is penetrating rust , where holes form. The progression from surface rust to structural weakness can take as little as 3-5 years in harsh climates if untreated. For a DIY stop on early-stage rust, follow this meticulous process: 1. Safety and Prep: Work in a well-ventilated area. Wear safety glasses, a respirator mask, and gloves. Remove all trim or parts near the rust spot. 2. Strip to Bare Metal: Merely sanding loose rust is insufficient. Use 80-grit sandpaper, a grinding disc, or a wire wheel on a drill to remove all rust, paint, and filler around the affected area until you see only shiny, bare metal. A rust converter is a chemical primer applied after mechanical removal; it reacts with remaining iron oxides to form a stable, black protective layer, but it is not a substitute for thorough sanding. 3. Clean and Degrease: Wipe the area with a wax and grease remover or isopropyl alcohol. Any contamination will cause the new paint to fail. 4. Apply Primer: Use a direct-to-metal (DTM) epoxy primer or a rust-inhibitive primer. This creates a chemically inert barrier. Apply 2-3 thin, even coats as per the product's instructions, allowing proper flash-off time between coats. 5. Apply Paint and Clear Coat: Once primer is fully cured, apply color-matched automotive paint in light coats. Finish with 2-3 coats of clear coat for UV protection and gloss. Feather the edges to blend with the surrounding paint. 6. Protect and Maintain: Once cured, apply a quality automotive wax or paint sealant. Regularly wash your car, especially in winter, to remove road salt, and inspect known trouble spots like wheel wells, door edges, and undercarriage. The single most important factor is catching it early. A spot the size of a pencil eraser is a weekend DIY fix. A fist-sized bubbled area is a much larger project. Industry consensus holds that neglecting small rust spots can lead to repair costs multiplying by a factor of 10 or more once structural components are compromised. While DIY methods can arrest rust effectively, they are a repair, not a restoration. The repaired area will always be a potential future failure point compared to original, undisturbed factory coatings and corrosion protection.
156
Share

How many volts does a dead car battery read?

A fully discharged, or "dead," car battery typically reads 10.5 volts or lower when measured at rest with a multimeter. This voltage indicates the battery lacks sufficient charge to reliably crank the engine. For context, a healthy, fully charged battery rests at about 12.6 volts. When under load during cranking, a dead battery's voltage will often drop precipitously below 10 volts, confirming its inability to deliver power. Understanding battery voltage states is crucial for accurate diagnosis. Here is a clear reference based on standard industry measurements for a 12-volt lead-acid battery at rest (after sitting for several hours without driving or charging): State of Charge Resting Voltage (Approx.) Battery Condition 100% Charged 12.6 - 12.8 Volts Optimal, fully charged. 75% Charged 12.4 Volts Acceptable, but may indicate aging. 50% Charged 12.1 - 12.2 Volts Partially discharged, recharging advised. 25% Charged 11.7 - 11.9 Volts Severely discharged, risk of damage. 0% Charged / Dead 10.5 Volts or Less Fully depleted, needs recharging or replacement. The 10.5-volt threshold is significant because it represents the point where a lead-acid battery's cells are nearly fully depleted. Continuing to draw power below this level can cause irreversible sulfation , where sulfate crystals harden on the plates, permanently reducing capacity. For a reliable diagnosis, always perform a voltage test correctly. Ensure the car has been off for at least an hour to get a "resting voltage." Set your multimeter to DC volts (20V range), connect the red probe to the positive terminal and the black to the negative terminal. A reading of 10.5V or less confirms a dead battery. For a more definitive test, perform a load test , which applies a high current draw similar to starting the car. A healthy battery should maintain above 9.6 volts during a 15-second load test, while a failing one will drop well below. Common reasons a battery reaches 10.5 volts include prolonged use of accessories while the engine is off, a faulty charging system (alternator), extreme temperatures, or simply an old battery that can no longer hold a charge. If recharging a battery at 10.5V, use a smart charger designed for recovery; a standard alternator drive may not be sufficient and could overwork the charging system.
163
Share

Can a bad TCM ruin a transmission?

Yes, a failing Transmission Control Module (TCM) can absolutely ruin a transmission. It sends incorrect pressure and timing signals to solenoids and valves, forcing gears to engage harshly, slip, or clash. This creates excessive friction and heat, the primary enemies of transmission longevity. The resulting internal damage often necessitates a complete rebuild or replacement, far exceeding the cost of TCM repair alone. A TCM is the transmission's central computer. Its core function is processing data from sensors (like vehicle speed, throttle position, and gear selection) to precisely command shift solenoids and valve bodies. These components control hydraulic pressure, dictating when and how firmly gears engage. When the TCM malfunctions, its output signals become erratic or default to "limp mode." This loss of precise control directly causes mechanical destruction. Erratic shifting and harsh engagements are primary failure modes. Instead of smooth, timed gear changes, a faulty TCM may command shifts with excessive hydraulic pressure. You feel this as a violent "clunk" or "bang." Each jarring engagement subjects gears, clutches, and bands to shock loads they aren't designed for, accelerating wear and leading to premature failure. Torque converter clutch lockup problems are another critical issue. The TCM manages the lockup solenoid. If it fails to command lockup properly, the converter remains in a fluid-coupled state, generating excess heat. Conversely, if it commands constant lockup, it creates drag and stall conditions. Prolonged overheating is a leading cause of transmission fluid breakdown and internal component warpage . False error codes and "limp mode" can mask other problems or cause unnecessary part replacements. A technician might replace a solenoid for a shift error code (e.g., P0750), only to find the new solenoid behaves the same because the TCM's control signal was flawed. This misdiagnosis wastes time and money while the underlying issue damages the transmission. Preventing TCM-induced damage requires recognizing early symptoms: delayed or missed shifts, inexplicable gear hunting, and the illuminated check engine light with transmission-related codes (e.g., P0700, P07xx series). Diagnosis should involve scanning for TCM-specific codes and checking its power, ground, and input signals from sensors before condemning internal transmission parts. Replacing a faulty TCM typically costs between $600 and $1200 for parts and programming, while a full transmission rebuild can exceed $4,000. TCM Failure Symptom Consequence for Transmission Typical Repair Range (Parts & Labor) Erratic/ harsh shifting Clutch pack & band wear; gear damage TCM: $600 - $1,200 Torque converter lockup failure Severe overheating; fluid breakdown Transmission overhaul: $3,000 - $7,000+ Default to "limp mode" (single gear) Strained components from improper gear ratio Sensor/Solenoid Replacement: $200 - $800 Slipping between gears Burned friction materials; total failure TCM + Transmission rebuild: $4,000+ Ultimately, the TCM and transmission are a symbiotic system. A malfunctioning brain (TCM) sends destructive commands that the mechanical body (transmission) must obey, leading to its physical ruin. Prompt diagnosis and repair of electronic issues are crucial to avoid catastrophic mechanical failure.
170
Share

Can a person sit on the roof of a car?

Yes, a typical car roof can temporarily support the weight of one or two people under static conditions, based on roof strength safety standards. However, this is a misuse of the vehicle's structure and carries significant risks of injury, vehicle damage, and voided warranties. The common belief that a roof can hold people stems from automotive safety testing. The Insurance Institute for Highway Safety (IIHS) conducts a roof strength evaluation to measure protection in a rollover crash. A “Good” rating requires the roof to withstand a force of at least four times the vehicle’s curb weight before reaching a critical threshold of 5 inches of crush. For a 4,000-pound sedan, that means the roof structure is tested to resist over 16,000 pounds of force. Crucially, this standard relates to dynamic force distribution in a crash, not safe static loading for sitting. The force is applied by a large metal plate to the roof's strongest edge. A person sitting concentrates their weight on a small area, creating high point pressure the roof panel is not designed for. While the underlying structure may be strong, the thin metal and padding can easily dent, compromising its integrity and weather sealing. To illustrate the weight-to-force relationship, consider these examples based on the 4x weight multiplier: Vehicle Curb Weight Force for "Good" IIHS Rating (4x weight) Equivalent Static Weight (Theoretical) 3,500 lbs (Compact SUV) 14,000 lbs Far exceeds human weight 4,000 lbs (Midsize Sedan) 16,000 lbs Far exceeds human weight 5,500 lbs (Large Truck) 22,000 lbs Far exceeds human weight Practically, a single adult (150-250 lbs) or two light individuals sitting carefully might not cause immediate catastrophic failure on many modern vehicles. However, multiple risks make it inadvisable. The primary danger is causing permanent damage. You will likely dent the roof, crack the windshield or moonroof frame, dislodge roof-mounted components like antennae or rails, and harm the headliner. Repair costs are frequently between $1,000 to $3,000 for panel work and repainting. Safety is a major concern. A roof is slippery and curved; a fall can result in serious injury. Movement or shifting weight can unexpectedly overload a spot. Furthermore, this action often violates your vehicle warranty and insurance terms. If a resulting dent leads to rust or a cracked windshield, your claim may be denied as it resulted from misuse. In summary, while engineering data suggests the structure is robust, using a car roof as a seat is risky and damaging. It is a safety feature, not a furniture piece.
174
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.