Is the PCX160 produced by Wuyang or Sundiro?

What are the hidden features of the Soueast V3 Lingyue?

Soueast V3 Lingyue hidden features include remote unlocking, trunk switch, sensitivity adjustment, speedometer, and fuel gauge light. Here are the details: 1. Speedometer: National regulations stipulate that the speedometer's indication must not be lower than the actual vehicle speed, and most models' speedometers show a speed about 10 km/h higher than the actual speed. 2. Fuel gauge light: After the fuel gauge light comes on, the car can still travel more than 20 kilometers. Beyond this range, other preparatory measures should be taken. 3. Configuration: The V3 Lingyue is equipped with four-wheel disc brakes, with front and rear brakes both being disc-type, paired with ABS+EBD, 2SRS, and four-door power windows.

119

Share

What does it mean when the ignition switch is in the ON position?

The ignition switch in the ON position means that all basic equipment except the starter is operating normally. If the key is also in the ON position, all components of the vehicle are powered, including the engine system. The dashboard lights will illuminate, and the fuel pump will begin to build up oil pressure. After approximately 5 to 10 seconds, the fuel pump will have fully built up oil pressure, and the dashboard needles will return to their original positions. Finally, pressing the start switch will start the vehicle. Meanings of other positions of the ignition switch: LOCK is for locking the car. Generally, when the key is in this position, the steering wheel is locked and cannot be moved significantly. ACC provides power to the entire vehicle, allowing the radio, lights, etc., to function normally, but the air conditioning cannot be used. The control process of the car's ignition switch: When the ignition switch is in the "OFF" position, turning the key to the "OFF" (off) position connects the two internal contact points in the horizontal position, which means the external wires "black-white wire" and "green wire" are connected. If you measure the two wires with an ohmmeter (Ω), they should be in a conductive state. In the actual vehicle, the connection of these two wires indicates that the entire circuit system stops working, the ignition system circuit is in a short-circuit state, and the engine is turned off.

117

Share

Is it okay to use the sunroof tilt function on rainy days?

No, this will allow water to enter. The uses of a car sunroof: 1. Change the traditional ventilation method: The car sunroof changes the traditional form of ventilation. Wind blows in to form an airflow that draws out the stale air inside the cabin. 2. Quickly remove fog inside the car: Using the sunroof to defog is a quick method of defogging. Especially in summer and autumn when there is more rain and higher humidity. 3. Rapid cooling to save energy: Using the sunroof also has energy-saving benefits. In the hot summer, a car left in the sun for an hour can easily reach an internal temperature of around 70°C. If you have a car with a sunroof, simply opening it can cool the car 2-3 times faster than using the air conditioning, and it also saves gasoline. 4. During traffic jams: In traffic jams, all vehicles are either stationary or moving slowly, and car exhaust inevitably becomes more concentrated than at any other time. Opening the sunroof and closing all side windows at this time can prevent exhaust fumes from entering the cabin. The negative pressure ventilation of the sunroof will expel the stale air from the car, preventing polluted air from entering the cabin. 5. Refreshing: Have you ever noticed while driving on the highway that once the car heater has been on for too long, it's easy to feel drowsy? If you open the side windows, you'll be bothered by the noise and crosswinds from the open windows.

119

Share

How many hours does an electric car need to charge in summer?

For most electric vehicles, the charging time typically ranges from 5 to 10 hours, which is the most common charging mode. Additionally, slow charging is the safest and most conventional method for electric vehicles, also known as AC charging, usually taking 6 to 8 hours to complete. Methods for charging new energy vehicles: 1. Portable charging cable: Simply plug it into a standard 220V 16A household socket to charge the electric vehicle, although the charging speed is relatively slow. Portable charging cables can be purchased from online stores, but it's essential to choose a reputable brand with reliable quality. 2. Home charging station: If you have a dedicated parking space, you can opt to install a home charging station. However, it's not just about having the station; you must obtain permission from the property management and get approval from the power company before installation, which can be quite cumbersome. 3. Public charging stations: If the first two options are not available, public charging stations become the only alternative. These are generally built and operated by power companies such as State Grid and Southern Grid, though some private enterprises have also entered this sector.

101

Share

What Causes a Mercedes-Benz to Shake?

The following are the possible reasons for a Mercedes-Benz shaking: 1. Worn or loose engine mounts: Engine mounts are rubber blocks placed between the engine and the frame. Their purpose is to reduce vibrations and cushion the engine's operation while also securing the engine in place. Once these mounts become worn or loose, the engine's shaking becomes noticeably more pronounced. 2. Engine misfire: An engine misfire mainly refers to one or more cylinders not functioning properly. Common symptoms include intermittent exhaust gas flow, severe shaking of the exhaust pipe, noticeable engine vibration, and sometimes accompanied by a sputtering sound. This is often related to faulty ignition coils. 3. Engine carbon buildup: Carbon deposits can accumulate in various parts such as the cylinders, throttle valve, spark plugs, and intake system—all of which are closely related to the engine's power output. When excessive carbon builds up inside the engine, the car's ignition energy decreases, and intake efficiency drops, ultimately leading to symptoms like engine shaking and poor acceleration.

113

Share

Is Volkswagen 0W20 Oil Fully Synthetic?

Most Volkswagen 0W20 oils are fully synthetic, but there are also semi-synthetic and mineral oils available in this grade. For example, Honda OEM oil, Kendall, AUTOBACS-QUALITY, and Volkswagen OEM oil offer 0W20 grades that are semi-synthetic, while GAC Honda's purple barrel OEM oil and others provide 0W20 grades that are mineral oils. Below is a classification of engine oils: Mineral Oil: Mineral oil is a commonly used lubricant in the market. It is derived from the refining process of petroleum, where useful substances like gasoline and aviation fuel are distilled, and the remaining base oil is further processed. Essentially, mineral oil is inexpensive but has a shorter lifespan and inferior lubrication performance compared to synthetic oils, and it also causes more environmental pollution. Semi-Synthetic Oil: Semi-synthetic oil is made from semi-synthetic base oil, which is a product of refining mineral oil through hydrocracking technology. It is a blend of mineral oil and fully synthetic oil in a 4:6 ratio. Semi-synthetic oil's purity is very close to that of fully synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product between mineral and synthetic oils. Fully Synthetic Oil Fully Synthetic Oil: This oil is derived from ethylene and propylene, which are dispersed from natural gas or crude oil, and then undergoes polymerization, catalysis, and other complex chemical reactions to form a lubricating fluid composed of large molecules. In essence, it uses the better components of crude oil, undergoes chemical reactions, and is controlled to achieve the desired molecular structure. Fully synthetic oil molecules are neatly arranged, giving them strong resistance to external variables. Therefore, they have excellent thermal stability, oxidation resistance, and viscosity stability, far outperforming mineral and semi-synthetic oils. The number before the "W" represents cold-start performance, where "W" stands for Winter. The number after "W" is an indicator of the oil's high-temperature resistance. Engine oil plays a crucial role in vehicle operation, including cooling, shock absorption, rust and corrosion prevention, sealing, lubrication, and cleaning. Temperature ranges corresponding to the number before "W": 0W corresponds to a minimum operating temperature of -35°C; 5W corresponds to a minimum operating temperature of -30°C; 10W corresponds to a minimum operating temperature of -25°C; 15W corresponds to a minimum operating temperature of -20°C; 20W corresponds to a minimum operating temperature of -15°C; 25W corresponds to a minimum operating temperature of -10°C; Oil viscosity changes with temperature, so it is essential to pay attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts for the engine. The second number represents the oil's kinematic viscosity at 100°C. A higher number means the oil can maintain its viscosity better at high temperatures, indicating superior lubrication performance under high-temperature conditions. When selecting engine oil, consider the following: Choose oil based on the engine's requirements. There is no need to use high-grade oil in engines with lower requirements, nor should you use lower-grade oil in engines with higher requirements. Prefer multi-grade oils. Multi-grade oils are economical, long-lasting, and efficient, providing better engine protection. Due to their characteristics, multi-grade oils may appear darker and have lower oil pressure compared to conventional oils, which is normal.

110

Share