···
Log in / Register

Is the old driver's license required to be surrendered when renewing an expired driver's license?

6Answers
AlessandraLee
09/07/2025, 03:25:04 AM

When renewing an expired driver's license, the old driver's license must be surrendered to the vehicle management office. Required documents: When renewing an expired driver's license, the old driver's license must be surrendered to the vehicle management office. Additional information: According to the regulations on driver's license usage, an expired driver's license cannot be directly renewed in a different location. However, you can first transfer it to your place of residence and then proceed with the renewal. The Ministry of Public Security's Order No. 123 stipulates that driver's license renewal can be applied for up to 90 days in advance at the original issuing vehicle management office. Materials required for renewing a driver's license: Document 1: Original ID card and a copy of the ID card. Document 2: Qualified medical examination form from a hospital designated by the vehicle management office. Document 3: Three one-inch color photos. Document 4: Completed driver's license renewal application form and the corresponding fees.

Was this review help?
113
Share
Doris
09/19/2025, 02:29:41 AM

I just renewed my driver's license, and the DMV definitely collects the old one. The staff will cut a corner off the old license in front of you to invalidate it—that's the standard procedure. Last year, my cousin skipped handing in the old license to avoid hassle, and his new license production got delayed by half a month. Remember to bring your original ID card and a copy; booking an appointment on 12123 in advance can save you two hours of queuing. Oh, and you’ll also need to submit a medical exam report and photo receipt on-site. Myopic friends, make sure to wear frame glasses for the photo—contact lenses often cause issues during system recognition.

Was this review help?
2
Share
Expand All
Ivy
11/02/2025, 01:52:21 AM

I've assisted my father with this process twice. The old driver's license must be surrendered, otherwise the system will show duplicate valid documents. Since elderly people tend to be forgetful, I recommend clipping the license and ID card together with a paperclip beforehand. The renewal process is different from years past - the self-service kiosk at the DMV can issue the new license in three minutes, but the old license return window always has long queues. They need to scan and archive returned licenses. If you keep the old one privately, it might be considered using an invalid document when handling traffic violations later, which can be particularly troublesome.

Was this review help?
2
Share
Expand All
HarrisonFitz
12/16/2025, 01:56:22 AM

Of course, the old driver's license must be surrendered! Last month when renewing the license, there was a prominent notice at the counter: 'No new license will be issued without returning the old one.' The staff explained that this is an important measure to prevent black market trading of driver's licenses. The new license now includes anti-counterfeit patterns on the supplementary page, and surrendered old licenses are uniformly shredded. It's important to note that if the old license is lost, you must first obtain a loss certificate from the police station and pay a 20 yuan replacement fee. Also, remember to settle all traffic violations before renewing the license, or the trip will be in vain.

Was this review help?
19
Share
Expand All
VonDaniela
02/05/2026, 02:45:06 AM

As a responsible veteran driver with ten years of experience, I can tell you for sure: the old license must be surrendered! The DMV system needs to deactivate the original license number before generating a new one. Under the new regulations, there's now an additional facial recognition step during license renewal to compare the photo on the old license with your current appearance. I recommend choosing a weekday for the procedure - weekends are too crowded. Last time I went at 3 PM on Friday and finished everything in forty minutes. By the way, the six-year license renewal can be processed up to ninety days in advance, so don't wait until the last minute and rush around.

Was this review help?
20
Share
Expand All
VonDaniel
04/30/2026, 06:46:45 PM

First-hand experience of the license renewal process: Keeping the old license? No way! The collected old licenses will be corner-cut and scanned into the archives, with the latest validity period written into the new license's chip. The smart counters are super convenient now, but there are three things to note: First, get a driver's medical exam at a designated hospital in advance; second, the photo should be on a white background with dark-colored clothing; third, if the old license is severely damaged, it's best to apply for a replacement before renewal. My old license had a corner chewed by a dog, which ended up costing me an extra half-day to sort out.

Was this review help?
19
Share
Expand All
More Q&A

What is the combined fuel consumption of the BYD Tang fuel version?

BYD Tang fuel version's official combined fuel consumption is 9L/100KM according to the Ministry of Industry and Information Technology. The following is relevant information about BYD Tang: 1. Introduction to BYD Tang: BYD Tang (English name: BYD-Don, the all-new Tang) is a mid-size SUV under BYD. The all-new Tang has been officially launched, offering three different drivetrain models: fuel vehicle (all-new Tang), plug-in hybrid vehicle (all-new Tang DM), and pure electric vehicle (all-new Tang EV600). The fuel vehicle and plug-in hybrid vehicle are available in five-seater and seven-seater versions. 2. Configuration introduction of BYD Tang fuel version: The all-new Tang fuel version comes with abundant intelligent safety configurations and humanized comfort configurations. In terms of safety, it features systems like ADAS intelligent assistance system and vehicle stability control system.
115
Share

Why Can't the Car Trunk Close Properly?

It might be due to a damaged trunk lock, which can be replaced at a 4S shop. More relevant information is as follows: 1. The trunk structure is very simple, consisting of a motor-driven gear reduction mechanism that moves a rod to operate the trunk's locking mechanism, working similarly to the central door lock. 2. All vehicles must carry a warning triangle in the trunk, which is required during vehicle inspections. Especially in case of a breakdown, the triangle should be set up about 150 meters behind the vehicle to warn approaching traffic. Failure to do so may result in penalties from traffic police. Therefore, it's important to always keep the triangle properly stored and not take it out of the car unnecessarily.
117
Share

What is the size of the tire bolts for the Nissan Sunny?

Automotive tire bolts generally come in four sizes: 17mm, 19mm, 21mm, and 22mm. Load-bearing capacity of tire bolts: The number of bolts is, to some extent, related to the vehicle's weight and load. If the vehicle is heavy and the number of bolts is small, the force each bolt must bear increases, necessitating the use of thicker-diameter bolts to meet the load-bearing requirements. Function of automotive tire bolts: They help reduce and absorb vibrations and impact forces during driving, prevent severe vibrations and premature damage to vehicle components, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and energy efficiency.
101
Share

Where is the towing hook located on the Fabia?

The towing hook of the Fabia is located in the trunk area. The towing hook screws onto a small module, and it should be installed by turning it clockwise. Instructions for using a car towing hook: Locate the towing hook positions at the rear of the towing vehicle and the front of the towed vehicle. The towing hook positions are designed under the bumper. By inspecting the front and rear bumpers, you can find a concealed space covered by a round or square cap—this is where the car's towing hook is located. Function of a car towing hook: The towing hook serves the purpose of towing vehicles, but not all vehicles are eligible for towing hook installation. Only models that meet specific regulations can have a towing hook installed. Additionally, the towing hook must not protrude beyond the vehicle's body when installed; otherwise, installation is not permitted.
117
Share

What causes the buzzing sound in Audi A3 at 2000 RPM?

Audi A3 buzzing sound at 2000 RPM is mainly caused by increased carbon deposits in the throttle body. The following details the reasons and solutions: Increased carbon deposits in the throttle body: The throttle body is a controllable valve that regulates air intake into the engine, available in two types: traditional cable-operated and electronic throttle bodies. After entering the intake manifold, the air mixes with gasoline to form a combustible mixture for combustion. Connected to the air filter at the top and the engine block at the bottom, it is often referred to as the throat of the car engine. Increased carbon deposits in the throttle body absorb some gasoline when the engine is cold. When the engine warms up, this gasoline evaporates, causing an overly rich mixture at idle speed, which leads to low-speed vibrations. Corresponding solution: Release the gases. Engine oil will volatilize when heated during use. The longer the usage time and the higher the temperature, the stronger the volatilization. Additionally, some compressed gas from the cylinders will inevitably squeeze into the crankcase through the piston ring gaps. Therefore, there must be a channel to release these gases; otherwise, positive pressure will form in the oil pan.
110
Share

What causes the Geely electronic parking system malfunction?

If the electronic parking system malfunction is displayed, it is mostly due to an issue with the parking or brake system switch, which prevents the start system from receiving the brake signal, resulting in failure to start. Replacing the switch can resolve the problem. The specific causes are as follows: 1. Parking brake problem: The parking brake lever cannot be fixed. The parking brake fails. The parking brake makes abnormal noises or has aged. 4. System problem: The gap between the friction pads and the brake drum in the automatic parking system is too large, or the friction pads and brake drum are contaminated with oil, severely worn, have exposed rivets, or the surface is hardened, causing slippage and malfunction. 5. Wear problem: The parking brake pin shaft is severely worn, the gap is too large, or the parking brake lever adjustment is too long.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.