···
Log in / Register

Is the LSY engine a Ward's 10 Best winner?

6Answers
LeBriella
08/31/2025, 11:32:12 PM

The LSY engine is a Ward's 10 Best engine. The LSY is currently one of General Motors' most mainstream engines with very high technological content, but its power output falls short of the LTG engine, especially in mid-to-high speed power bursts. Additionally, during cylinder deactivation, the operation isn't as smooth as the LTG due to the added cylinder deactivation mechanism. However, the LSY offers better fuel economy than the LTG, more advanced technology, and more linear power delivery. Tripower Valve Management Technology: The LSY engine can control valve lift to achieve special opening degrees during operation. In four-cylinder operation mode, the intake valves fully open during the intake stroke. With normal air intake volume, fuel injection follows the standard air-fuel ratio (14.7:1). This mode delivers good performance experience, thanks to its maximum power reserve of 177kW/350Nm (1500-4000rpm). Intelligent Cylinder Deactivation Technology: The LSY engine's crankshaft structure is also quite unique. Under control system operation, it can deactivate "cylinders 2/3", leaving only "cylinders 1/4" working in a "half-open valve" state. Theoretically, this reduces fuel consumption by half, though power output inevitably decreases during two-cylinder operation, requiring slightly higher operating RPMs. Nevertheless, the overall fuel-saving effect remains quite impressive.

Was this review help?
108
Share
OChristopher
09/13/2025, 02:22:15 AM

Well, speaking of the LSY engine, it's actually a 2.0-liter turbocharged engine under General Motors, used in models like the Cadillac XT5. I remember it was indeed named one of Ward's 10 Best Engines back in 2019. The Ward's 10 Best is a globally renowned award that evaluates real-world driving performance during annual testing, considering metrics like fuel consumption, power, and noise levels to make the judgment. The LSY engine is brilliantly designed, featuring technologies such as cylinder deactivation, which allows it to shut down some cylinders under low load to save fuel, delivering both smooth and powerful performance. This award provides consumers with a reliable reference, indicating that this engine strikes a great balance between performance and efficiency. I've occasionally driven a friend's car equipped with this engine and found the acceleration responsive, fuel-efficient for daily commutes, and trouble-free overall—definitely a trustworthy piece of engineering.

Was this review help?
9
Share
Expand All
StMakayla
10/27/2025, 03:09:12 AM

Indeed, the LSY engine was honored with the prestigious Ward's 10 Best Engines award in 2019, a testament to its authoritative recognition. As part of General Motors' eighth-generation Ecotec series, it powers vehicles like the Cadillac CT5. The Ward's 10 Best selection process rigorously evaluates parameters such as power output, fuel efficiency, and reliability. The LSY stands out for its innovative design, featuring components like a variable-displacement oil pump and an advanced turbocharging system, delivering around 260 horsepower while maintaining commendable fuel economy in urban driving conditions. This engine's versatility is evident in its application across Chevrolet models as well. A test drive quickly reveals why it made the list: responsive performance, low noise levels, and suitability for family-oriented needs. Engineers prioritized both environmental considerations and practicality in its design, and this accolade has significantly bolstered its market competitiveness.

Was this review help?
12
Share
Expand All
StPiper
12/10/2025, 02:25:03 AM

Yes, the LSY engine is one of the Ward's 10 Best Engines, and that was in 2019. This General Motors 2.0T engine is quite famous and is installed in the new Cadillac models. Ward's selects the 10 Best Engines every year, and the LSY won the award on its merits because it's both efficient and powerful. People who have driven it say it has good acceleration and is fuel-efficient. Young people choose this car for its high cost-performance ratio. Behind the award, it was tested in various driving scenarios, proving its reliability and durability. In short, it's a good choice.

Was this review help?
8
Share
Expand All
Hazel
01/30/2026, 03:36:10 AM

The LSY engine was indeed named one of Ward's 10 Best Engines in 2019. As someone who has driven for many years, I find this General Motors 2.0T engine to be practically designed, featuring cylinder deactivation to reduce fuel consumption at low speeds. In real-world driving, it delivers smooth power with minimal noise. Ward's 10 Best Engines selection emphasizes overall performance, and the LSY stands out for its balance between power and fuel efficiency, offering a safe and reliable driving experience. When used in models like Cadillac, it performs stably and handles long-distance travel with ease. In short, it earned its award through technological innovation and is worthy of trust from experienced drivers.

Was this review help?
9
Share
Expand All
DelDaniella
04/25/2026, 02:36:29 PM

The LSY engine won the 2019 Wards 10 Best Engines award, which is a recognition of General Motors' engine technology. Wards selects the top 10 engines through professional testing, evaluating criteria such as acceleration performance, emission levels, and user experience. The LSY engine, as seen in Cadillac vehicles, excels with its efficient turbocharging and variable valve system, delivering approximately 260 horsepower while reducing fuel consumption. This award helps consumers identify high-quality products and enhances market credibility. Having driven models equipped with it, the performance feels comparable to more expensive engines, and daily maintenance is straightforward.

Was this review help?
5
Share
Expand All
More Q&A

Why does an automatic transmission car's engine speed increase but the speed doesn't when accelerating?

When an automatic transmission car's engine speed increases but the speed doesn't when accelerating, it is typically an issue with the automatic transmission, with the most common cause being the torque converter not locking up. Symptoms of a torque converter not locking up: Under normal circumstances, when the engine speed, vehicle speed, and throttle depth reach a certain level, the torque converter should lock up. If the torque converter fails to lock up, it often results in the car revving loudly without accelerating. This phenomenon mainly occurs in vehicles equipped with torque converters, such as all AT (automatic transmission) cars and some CVT (continuously variable transmission) models. Solution: For smooth and powerful acceleration in an automatic transmission car, it is necessary to press the accelerator pedal more firmly. Whether the torque converter locks up depends not only on the vehicle speed but also on the engine speed and throttle depth. If the driver consistently applies light throttle input and maintains low speeds, the engine speed may not rise sufficiently, preventing the torque converter from locking up.
107
Share

What is the function of the left and right engine mounts?

The functions of the left and right engine mounts are as follows: Supporting role: The most basic function of the mounting system is to support the powertrain. When designing the mounts, it is essential to ensure that the vehicle's powertrain is positioned correctly and that the entire mounting system has a sufficient service life. Limiting role: During transient conditions such as engine start-up, shutdown, vehicle acceleration and deceleration, as well as various interference forces (e.g., road bumps), the mounts should effectively limit the maximum displacement of the powertrain to prevent collisions with surrounding components and ensure proper powertrain operation. Vibration isolation role: As the connecting component between the chassis and the engine, the mounts must not only prevent engine vibrations from being transmitted to the vehicle body but also mitigate the impact of uneven road excitation on the powertrain.
115
Share

Can the car still be driven if the shock absorber is broken?

The car can still be driven if the shock absorber is broken. Here is some relevant information about shock absorbers: 1. Concept: The need for shock absorbers arises because springs cannot stabilize immediately. In other words, after being compressed and released, springs will continue to oscillate for a period of time. Therefore, shock absorbers can absorb the vibrations caused by uneven road surfaces, ensuring a comfortable ride. 2. Principle: Related to the transfer of vehicle weight. The speed of weight transfer during corner entry and exit affects the balance of handling, and this effect persists until the weight transfer is complete. The speed of weight transfer is controlled by the shock absorbers. Adjusting the speed of the shock absorbers during compression and rebound can alter the speed of the vehicle's momentum transfer.
106
Share

What are the reasons why a motorcycle cannot reach high speed?

Motorcycle may not reach high speed due to abnormal compression ratio or improper mixture ratio. Below is an introduction to the knowledge of motorcycle power deficiency: Other reasons: The exhaust pipe is blocked by carbon deposits and dirt, or the front bend of the exhaust pipe is dented; such motorcycles have no problem at low speeds but cannot reach high speeds. Precautions: It is best not to directly rinse the headlight, left and right handrails, ignition switch, exhaust pipe outlet (it is best to block it with something), horn, spark plug, air filter, battery, and other parts with water. These parts have circuits, and getting them wet can cause short circuits or leakage, leading to faults such as lights not working, horn not sounding, failure to start, and weak driving. It is best to clean them with a cloth.
107
Share

How to Fold the Rearview Mirrors on the T-Roc?

The rearview mirrors on the T-Roc can be folded by simply pushing them towards the rear of the vehicle. The methods for adjusting and folding the T-Roc rearview mirrors are as follows: 1. L button: Use the knob to adjust the left exterior rearview mirror by turning it up, down, right, or left. 2. R button: Use the knob to adjust the right exterior rearview mirror by turning it up, down, right, or left. 3. 0 position: The exterior rearview mirror is folded out and cannot be adjusted. 4. In case of malfunction: The power exterior rearview mirror can be manually adjusted mechanically by pressing the edge of the mirror.
116
Share

What are the hazards of Volkswagen engine oil leakage?

Volkswagen engine oil leakage hazards include internal engine damage, increased risk of spontaneous combustion, and potential fire hazards. Below are the specific hazards of Volkswagen engine oil leakage: Internal engine damage: Engine oil leakage not only wastes oil but can also lead to severe internal engine damage in serious cases. Increased risk of spontaneous combustion: Since the engine operates at very high temperatures, oil leakage onto the engine or other components can easily cause spontaneous combustion. Potential fire hazards: Although the ignition point of engine oil is as high as over 200 degrees Celsius, when it comes into contact with a turbocharger operating at several hundred degrees Celsius, especially when the leaked oil mixes with other impurities, the ignition point decreases, further increasing the risk of fire.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.