···
Log in / Register

Is the labor cost included in the free first maintenance?

1Answers
MacSophia
08/28/2025, 04:29:24 AM

The first maintenance is free and does not charge labor cost. The related introduction of the first car maintenance is as follows: First maintenance content: Replace engine oil and oil filter; Check the operation of the braking system, such as the gap and wear of brake pads and discs; Tighten the bolts of each system; Check and adjust the drive belt; Check and adjust tire balance and alignment; Check and replenish various fluids; Check the operation of lights, battery, shock absorbers and other components. Purpose of car maintenance: Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting or replacing certain parts of the car, also known as car maintenance. The purpose of car maintenance is to keep the car clean, normal technical condition, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life.

Was this review help?
120
Share
More Q&A

Is the Mercedes-Benz MOE a run-flat tire?

Mercedes-Benz MOE is a run-flat tire. Below is an introduction to related Mercedes-Benz content: Mercedes-Benz SAM: The control unit, also known as the Signal Acquisition and Actuation Module. If the SAM malfunctions, components such as headlights, turn signals, and windshield wipers cannot be controlled while driving, posing safety hazards. Mercedes-Benz: A German automobile brand, considered one of the most successful premium car brands in the world. It is renowned for its perfect technical level, stringent quality standards, innovative capabilities, and a series of classic coupe models. The Mercedes three-pointed star has become one of the most famous automobile and brand logos in the world. Mercedes-Benz cars not only have unparalleled quality but also a comprehensive range of models. Currently, it mainly produces A-Class cars, C-Class cars (mid-range sedans and sports cars), E-Class cars (high-end sedans and sports cars), S-Class cars (luxury sedans and sports cars), and G-Class cars (SUV off-road vehicles).
107
Share

Should the Tiggo 3 use 5W30 or 5W40?

Tiggo 3 can choose 5W-30 fully synthetic engine oil. Conventional lubricants should be replaced every 5,000 kilometers or six months, while premium fully synthetic lubricants provide comprehensive engine protection under high-speed and harsh conditions. Both 5W-30 and 5W-40 oils are multi-grade oils, meaning they can be used in any season and provide engine protection. The "W" stands for winter. The lower the number before the W, the lower the viscosity, indicating better fluidity at low temperatures. The number after the W represents the viscosity at 100 degrees Celsius. A higher number indicates higher viscosity; for example, 5W-40 oil has higher viscosity than 5W-30, which indirectly indicates better high-temperature protection performance. When selecting engine oil, it is essential to consider the vehicle's usage conditions. Vehicles frequently driven in urban areas and those driven on rough roads require different oils. For vehicles frequently used for high-speed or long-distance driving, 5W-40 oil is recommended due to its excellent oil stability.
110
Share

Is the Braking System Hand Brake or Foot Brake?

The braking system includes the foot brake and the hand brake, with the hand brake being used for emergency braking. Hand Brake: The hand brake is an auxiliary braking device that uses the lever principle to pull the brake cable, locking the rear wheel brake shoes or calipers to brake the vehicle, meaning it only brakes the rear wheels. Foot Brake: The foot brake is the service brake, utilizing a hydraulic system where the brake master cylinder applies pressure (via foot pedal) to the brake pads on all four wheel hubs, creating friction against the hubs to achieve braking. Differences: The hand brake is a purely mechanical braking system, independent of the engine, with a low probability of failure. It serves as a backup to the hydraulic foot brake, acting as the last line of defense in case of hydraulic system failure. During emergency braking, using both the hand brake and foot brake simultaneously can cause the rear wheels to lock up. At high speeds, locked rear wheels can easily lead to skidding and loss of control. In terms of braking effectiveness, the best braking state is achieved when the wheels are locked.
112
Share

How is the penalty for the traffic violation of not driving in the designated lane with 2 points deducted?

Not driving in the designated lane results in a 2-point deduction and a fine of 100-200 yuan. Details are as follows: 1. Penalty details for not driving in the designated lane: Article 90 of the Road Traffic Safety Law states that motor vehicle drivers who violate road traffic safety laws and regulations regarding road traffic rules shall be given a warning or fined not less than 20 yuan but not more than 200 yuan. If there are other provisions in this Law, penalties shall be imposed in accordance with those provisions. 2. Details on prohibited U-turns: Article 49 of the Road Traffic Safety Law Implementation Regulations stipulates that motor vehicles shall not make U-turns at locations with signs or markings prohibiting U-turns or left turns, as well as at railway crossings, pedestrian crossings, bridges, sharp curves, steep slopes, tunnels, or sections of road prone to danger. Motor vehicles may make U-turns at locations without signs or markings prohibiting U-turns or left turns, but they must not obstruct the passage of other vehicles and pedestrians traveling normally.
111
Share

Is the Tharu's Hill Descent Control Automatically Activated?

The Tharu's Hill Descent Control is not an automatically activated function. There is a small car descending icon near the gear lever of the Tharu. By turning on this setting button, the vehicle will automatically adjust its speed. Introduction to Hill Descent Control: Also known as the slope control system, its main function is to maintain a lower vehicle speed on steep downhill roads, ensuring tire grip and allowing the car to safely descend to the flat road below. Once the Hill Descent Control is set, the driver can release all pedals and focus on steering the vehicle. After the Hill Descent Control is activated: The driver no longer needs to operate the throttle and brake. The downhill speed control range is 2-30km/h. When entering a downhill section at a speed below 30km/h, the driver can increase or decrease the downhill speed within this range by pressing the throttle or brake.
119
Share

What are the dimensions (length, width, height) of the Mercedes-Benz GLS450?

The 2020 Mercedes-Benz GLS450 Dynamic model has a length of 5214mm, width of 1956mm, height of 1823mm, and a wheelbase of 3135mm. Below is an introduction to Mercedes-Benz related content: SLK Configuration: With the continuous rise of the global premium sports car market, Mercedes-Benz timely launched the SLK series. The 'S' stands for Sports, 'L' for Lightweight, and 'K' is the German word Kurz, meaning Short in English. Interior and Exterior Configuration: The SLK sports car features a 4-cylinder 2.3-liter supercharged engine with a maximum output of 193 horsepower, fuel consumption of 8.2 liters per 100 kilometers, acceleration from 0-100 km/h in just 6 seconds, and a top speed of 237 km/h. The engine is equipped with a variable valve timing device that works with an electronically controlled magnet to supply oil pressure to a chamber within the camshaft drive chain, gently rotating the camshaft and altering the valve opening and closing times based on cam and piston movement.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.