···
Log in / Register

Is the Envision Fuel Efficient?

6Answers
DeBeau
09/01/2025, 03:38:12 AM

The comprehensive fuel consumption of the Buick Envision ranges from 6.6 to 8.8 liters per kilometer. The 1.5T model has an average fuel consumption of about 7.6 liters per 100 kilometers, while the 2.0T model averages around 11.5 liters per 100 kilometers. Here is some relevant information about the Envision: 1. Vehicle Introduction: The Chinese name for the Buick ENVISION is "Ang Ke Wei" (Envision). As a new-generation strategic model of General Motors, the Buick Envision's exterior design inherits the essence of the ENVISION Vision concept car. 2. Variants: The current models are available in 1.5T and 2.0T engine options, each with both front-wheel drive and all-wheel drive versions. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T comes with a 6-speed automatic transmission.

Was this review help?
120
Share
CarsonLee
09/13/2025, 11:21:58 PM

As someone who has been driving for over a decade, I think the Envision's fuel consumption depends on specific conditions. This Buick midsize SUV comes with a 2.0T engine version, typically consuming 10-12L/100km in city driving and dropping to around 7-8L on highways. Overall, it's not a gas guzzler but not particularly fuel-efficient either—it largely depends on your driving habits. Frequent hard braking or heavy AC usage with full load will increase consumption. Vehicle weight also plays a significant role; I've observed 1-2L extra consumption when fully loaded. Fortunately, its automatic start-stop system helps save some fuel in traffic. To control consumption, I recommend gentle acceleration, avoiding sudden speed bursts, maintaining regular servicing, and keeping tires properly inflated. In summary, among SUVs it delivers average fuel economy, suitable for practicality-focused drivers.

Was this review help?
8
Share
Expand All
VonCassidy
10/28/2025, 12:04:53 AM

From a practical driving perspective, I've driven my friend's Envision several times and found the fuel consumption quite reasonable. In city driving, it averages around 11L, while on highways it's more economical, typically between 7-9L. The key factor is driving style – aggressive acceleration or frequent traffic congestion can quickly spike fuel consumption. The engine utilizes turbocharging technology which is efficient, though still slightly higher than sedans. The vehicle's substantial curb weight and spacious interior do sacrifice some fuel economy. My experience shows that adopting smooth driving habits and regular oil changes can significantly improve mileage, saving 1-2L without issue. Compared to similar-class vehicles, it's not particularly thirsty; if your daily commute is short or highway-heavy, choosing it makes good economic sense.

Was this review help?
20
Share
Expand All
LaMary
12/10/2025, 11:21:01 PM

I've been following the SUV market for a long time, and the Envision's fuel consumption is above average. The base 2.0T engine consumes around 10L in city driving, while the plug-in hybrid version is more fuel-efficient but comes at a higher price. Comparatively, models like the Tiguan or Highlander have similar fuel consumption, ranging between 9-12L. There are some fuel-saving design highlights, such as lightweight materials and start-stop functionality. However, actual driving conditions can significantly affect fuel consumption—on a weekend trip, my highway fuel consumption dropped to 8L, but in city traffic, it soared to 12L. Personally, I think it's important to consider daily driving conditions when choosing: if you frequently drive short distances in heavy traffic, higher fuel consumption is inevitable. As a young car owner, I recommend test driving to get real-world data and not be misled by advertisements.

Was this review help?
15
Share
Expand All
NaomiMarie
01/31/2026, 12:25:58 AM

Over the years of driving the Envision, I've summarized some fuel-saving tips. The fuel consumption generally ranges from 9-11L/100km, but it can be improved through driving habits—avoiding sudden braking, maintaining steady speeds on highways, and regularly cleaning carbon deposits are quite effective. The engine itself is efficient, but the vehicle's weight and aerodynamic drag increase consumption slightly. I've tried saving about 1L by not using air conditioning or driving with lighter loads, but it's not practical. Daily maintenance is also crucial: ensuring fresh engine oil, proper tire pressure, and avoiding frequent heavy loads. Compared to pure electric models, it's not the most energy-efficient, but it offers a good balance for a fuel-powered vehicle. If you're a new driver or have a long commute, keeping your speed between 60-80 km/h yields the best results, and you'll see changes after sticking to it for a month.

Was this review help?
16
Share
Expand All
McPiper
04/25/2026, 06:08:52 PM

Buick models, like the Envision, have made progress in fuel consumption. Older models were criticized for being gas-guzzlers, but after optimization, they now average around 10L in the city and 7-8L on the highway. As a family user, I find the fuel consumption acceptable—sacrificing a bit of economy for safety and spaciousness. The key lies in the updated efficiency technologies in the engine and transmission systems. I usually drive it for family trips, with an average fuel consumption of around 11L. Many factors affect this: fuel consumption is lower when temperatures drop, and higher in summer with the AC on. It's advisable to check maintenance records, as tire and air filter conditions directly impact fuel consumption. Overall, it's a reasonable choice among SUVs—not outstanding but reliable, with a good long-distance driving experience.

Was this review help?
14
Share
Expand All
More Q&A

How Long Until the First Driver's License Renewal?

The first driver's license renewal period is six years. Driving with an expired license is prohibited and may be treated as driving without a license. Motor vehicle drivers should apply for license renewal at the vehicle management office of the license issuing authority within 90 days before the expiration of their current driver's license. When applying, they must fill out the 'Motor Vehicle Driver's License Application Form.' If a driver has not accumulated 12 or more penalty points in any scoring cycle during the six-year validity period of their license, they will be issued a new license with a ten-year validity period. If they continue to maintain this record during the ten-year validity period, they will be issued a long-term valid driver's license. Time regulations: If the license has been expired for less than a year, it can be renewed normally; if expired for more than one year but less than three years, the license will be revoked, but it can be renewed by passing the subject one test; if expired for more than three years, the license becomes invalid and cannot be renewed.
113
Share

What does it feel like after changing manual transmission fluid?

After changing the transmission fluid, it helps maintain the cleanliness of the gear system, ensures the proper functioning of the transmission, and extends the lifespan of the drivetrain. Performance and maintenance methods of transmission fluid: Transmission fluid reduces friction, minimizes wear, and controls the performance of the clutch and synchronizer. It also bears loads (low-speed high torque, vibration loads), dissipates heat, reduces vibration and noise, and removes contaminants from gear meshing (cleaning function). Additionally, it prevents corrosion, pitting, and surface metal stripping, isolates metal surfaces, and prevents direct contact between metal components. When experiencing body shaking, gearshift jerking, or a transmission overheating warning on the dashboard, the transmission fluid should be replaced promptly. Methods for changing transmission fluid: Loosen the drain plug at the bottom of the transmission to drain the old fluid before refilling, or directly remove the transmission oil pan to drain and refill. The latter method is more thorough, as it removes impurities from the bottom of the oil pan. Alternatively, a smart circulation machine can be used for dynamic fluid replacement, which filters and cleans sludge and impurities inside the automatic transmission through circulation.
104
Share

What Causes Difficulty in Shifting Gears in a Manual Transmission?

Clutch cable failure. Some manual transmission vehicles still use cables to control the clutch. The cable sheath is prone to breakage, leading to difficulty in shifting gears without the clutch. This issue is relatively simple to fix—just replace the cable directly. 2. The gear self-locking force on the clutch side is too strong, making it difficult to engage or disengage gears. In this case, it is recommended to go to a repair shop to adjust the clutch cable and gear stop lock. 3. Failure of the clutch master cylinder. The clutch hydraulic master cylinder may lose pressure or leak oil during use. When pressing the clutch pedal to shift, the shift lever may fail to engage. The clutch master cylinder needs to be replaced at a service station, and the system must be bled afterward. 4. Transmission issues, such as insufficient transmission fluid, a stuck transmission shift mechanism, or a fault in a specific gear or shift fork, can all lead to difficulty or failure in shifting gears. For transmission problems, it is necessary to visit a professional repair shop for a detailed inspection. The steps for starting a manual transmission vehicle are: 1. After starting the car, press the clutch pedal all the way down with your left foot to completely disengage the clutch. 2. Shift the transmission into first gear. 3. Press or lift the electronic handbrake button. 4. Ensure safety by observing the road and other vehicles or pedestrians. 5. Continue pressing the clutch pedal with your left foot to keep the clutch disengaged, press the accelerator pedal with your right foot, and slowly release the clutch pedal with your left foot.
107
Share

What does (a) mean in a car?

The 'a' in a car refers to the Auto Hold function. Below is additional information: Introduction to the Auto Hold function: Auto Hold is an automatic braking feature. Once activated, for example, when stopping at a traffic light, it simplifies operations by eliminating the need to use the handbrake or electronic parking brake. For automatic transmission models, it also avoids frequent switching between D to N or D to P. How Auto Hold works: Auto Hold is an extension of the ESP (Electronic Stability Program) functionality, controlled by the ESP components. When the vehicle comes to a temporary stop and needs to restart shortly after, the braking for this situation is managed by the ESP-controlled brakes. The computer uses a series of sensors to measure the vehicle's levelness and wheel torque, determining any tendency for the vehicle to roll. It then applies an appropriate braking force to the wheels to keep the vehicle stationary.
110
Share

What is the lifespan of a dual-clutch transmission?

Generally, the lifespan of a dual-clutch transmission is around 20 years or 500,000 kilometers. Below is some extended information: Internal structure of the transmission: A dual-clutch transmission mainly consists of four components: the gear transmission, shift actuation mechanism, control system, and dual-clutch assembly. Typically, parts that may need replacement include the clutch gear bearings. The clutch plates experience significant wear but are relatively inexpensive and easy to replace. In contrast, gears and bearings may require a major overhaul or complete transmission replacement, involving more materials such as carbon steel, alloy steel, ductile iron, and gray cast iron. These materials are highly durable, making them less prone to damage under normal conditions. Methods to extend lifespan: Avoid prolonged low-speed driving. During traffic congestion, the clutch plates remain in a semi-engaged state and frequently shift between first and second gears, accelerating wear and reducing lifespan. In such situations, shifting to 'S' mode for low-speed driving can help avoid constant switching between first and second gears. Avoid excessively fast gear shifts—this does not refer to upshifting or downshifting during driving, but rather shifting into forward gear before the vehicle has fully stopped when reversing. Such actions can cause severe gear impact, thereby shortening the lifespan of the dual-clutch assembly.
118
Share

How Often Should Seat Belts Be Inspected After Years of Use?

Seat belts should generally be inspected once every two years of use. Here are some precautions for using seat belts: Lap Belt: The lap belt should be fastened snugly across the lower part of the hip bones, making direct contact with the femur area. In the event of a collision, the impact force will be distributed to the pelvic bones, preventing the belt from tightening around the abdomen and causing serious injuries. Shoulder Belt: The shoulder belt should be positioned across the shoulder and over the chest. These areas of the body can effectively withstand the restraining force of the seat belt. General Usage: The seat belt should be positioned across the hips and chest, forming a horizontally placed V-shape over the pelvis and ribcage. It should be used by one person only; sharing with another person is strictly prohibited. Avoid twisting the seat belt during use.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.