Is the driver's license fee paid by oneself or the driving school?

3 Answers
VonJayden
07/29/25 2:29am
Generally, the fee is paid by the driving school as a whole, and the registration fee collected by the driving school usually includes the driver's license fee. Below are some considerations for registering for the driver's license test: 1. Verify the driving school's qualifications: A legitimate driving school not only has a business license but also possesses a road transport permit, among others. 2. Whether the enrollment personnel make arbitrary promises: Ensure your interests are not infringed upon. 3. Whether there are additional charges: Pay attention to whether the price is all-inclusive and whether there are any other extra charges along the way. Typically, the more all-inclusive the price, the less likely there are to be random fees.
Was this review help?
19
4
Share
VanHazel
08/12/25 12:36pm
When I was learning to drive and taking the driver's license test, I had to pay the license production fee myself. It was just a small amount of over ten yuan paid at the vehicle management office during the procedures, either in cash or via scan-to-pay. The driving school was only responsible for teaching driving, while the document fees were calculated separately. My friend signed up for an all-inclusive driving school course, thinking everything was covered, but when he went to collect his license, he was told the production fee had to be paid separately. He quickly made the payment and only then got his license. It's advisable to carefully review the contract before starting driving lessons to avoid being misled by the driving school. This fee isn't high but is essential, covering the government's production costs. After paying, remember to keep the receipt in case you need to replace the license and avoid paying again. The whole process is quite fast—usually, you can get your license on the same day the procedures are completed. Don’t wait until after the test to handle this.
Was this review help?
4
2
Share
Expand All
VanAbigail
10/02/25 4:16am
I got my driver's license several years ago, and the license fee has always been paid out of my own pocket. The DMV charges are very standardized, and driving schools at most act as agents for collection and processing. I suggest actively asking the instructor about fee details during the learning phase. If the driving school contract doesn’t explicitly state that it includes the license fee, you’ll have to pay it yourself. Payment is simple—just bring your ID to the counter, and it’ll be done in minutes. For convenience, opt for an all-inclusive driving school course, but make sure to check the contract details to avoid omissions. The license fee isn’t much, around 20 yuan, and paying it early saves hassle. Also, after getting your license, check the information for accuracy—any corrections made on the spot are free. The main cost of learning to drive lies in training; covering small fees yourself is no big deal. Developing the habit of managing things yourself is more important than anything else.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to Replace the Headlight Bulb on a Haval H6?

Haval H6 headlight bulb replacement method is as follows: 1. Open the engine compartment cover, locate the dust cover at the rear of the headlight assembly, and identify the bulb that needs replacement. 2. Unscrew it along the thread direction. 3. Pinch the wire clip next to the base until the clip releases. 4. Hold the metal tab at the tail of the bulb and pull it out, disconnect the power connector at the rear, then connect the new bulb and reassemble in reverse order. More details about the Haval H6 are as follows: 1. The all-new Haval H6 is equipped with Great Wall's self-developed 1.5GDIT direct-injection engine, featuring advanced technologies such as CVVL continuous variable valve lift, integrated exhaust manifold in the cylinder head, and dual VVT for intake and exhaust. 2. The all-new Haval H6 comes with two powertrain options developed by Great Wall Motors: a 1.3T and a 2.0T engine. The 2.0GDIT direct-injection turbocharged engine shows significant improvements in performance parameters, delivering a maximum power of 145kW and a peak torque of 315N·m, incorporating leading technologies like direct injection, turbocharging, and dual VVT. The 1.3T engine produces a maximum power of 102kW and a peak torque of 235N·m, also utilizing multiple advanced technologies.
8
0
Share

Is the Bora's Transmission an Aisin 6AT?

The Bora's transmission brands include Aisin and Volkswagen's self-produced DSG transmission. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Bora 1.6L model is equipped with an Aisin 6AT manual-automatic transmission. The manual-automatic transmission is essentially a traditional AT or CVT transmission with added manual shifting functionality. The purpose of the manual-automatic transmission is to enhance the driving pleasure of automatic vehicles. On the other hand, the 1.4T model comes with Volkswagen's DSG dual-clutch transmission. The DSG transmission is distinctly different from traditional automatic transmissions, as it does not use a torque converter from the outset. This transmission was not developed based on the traditional concept of automatic transmissions. The engineers who designed the DSG took an innovative and entirely new technological path, cleverly combining the flexibility of manual transmissions with the convenience of traditional automatic transmissions. For the Bora's transmission, the following points should be noted during daily use: Do not delay replacing the transmission oil for extended periods. Prolonged failure to replace the transmission oil can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause the transmission to overheat and produce a noticeable jolt when shifting back into D gear. Never shift into D/R gear before the vehicle has come to a complete stop. Many drivers, aiming to demonstrate smooth operation, shift into reverse gear before the vehicle has fully stopped. This can significantly damage the transmission gears and, over time, lead to gear grinding and other faults. Avoid frequently climbing steep slopes in D gear. When facing steep inclines, automatic vehicles may overheat due to high load or shift up too early, resulting in insufficient power. In such cases, using manual mode to limit lower gears or switching to sport mode can help protect the transmission. Do not tow the vehicle over long distances. If an automatic vehicle breaks down, it should be transported using a flatbed tow truck with the vehicle in N gear, rather than being towed directly with a rope or similar method.
5
0
Share

What is the violation for traffic violation code 30191?

Violation code 30191 means: When a motor vehicle is in motion, the passenger fails to use the seat belt as required (while driving on ordinary roads or urban streets). According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: Demerit points (deduction): 0 points; Fine amount: 200 yuan; Other penalties: None. Traffic violation codes consist of four to five digits, classified according to the principles of the traffic law. The order from left to right is: the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the item number under the specific clause. First digit: Behavior classification code, indicating the category of the violation under the Road Traffic Law; Second digit: Demerit point classification code, indicating the classification of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the violation within the same behavior classification. For example: 13035—"1" indicates a motor vehicle violation, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item under the third clause in the 3-point deduction category. Explanation of behavior classification codes: Codes starting with "1" indicate motor vehicle violations, e.g., 1003; Codes starting with "2" indicate non-motor vehicle violations, e.g., 2002; Codes starting with "3" indicate pedestrian or passenger violations, e.g., 3030; Codes starting with "4" indicate highway violations, e.g., 4002; Codes starting with "5" indicate other regulations, e.g., 5005; Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with "8" indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to check motor vehicle violations: Visit the office halls of traffic branches in various districts or counties to inquire through touch-screen terminals; Log in to the external service website of the local Public Security Bureau's Traffic Management Bureau, find the vehicle violation inquiry section, enter the license plate number and engine number, and click to inquire; Call the inquiry hotline (area code + 114); Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to inquire. For the violation of passengers not using seat belts as required while driving on ordinary roads or urban streets, you can handle it through the Traffic Management 12123 app. After logging in, enter the violation processing workflow, complete the process, and make the payment.
15
5
Share

How to Use the Auto Hold Function in the Sagitar?

The method to use the auto hold function in the Sagitar is: 1. Press the AUTOHOLD button or the button with an 'A' while ensuring the seatbelt is fastened and the doors are closed; 2. Step on the brake pedal to activate the auto hold. The Sagitar has the following dimensions: length 4753 mm, width 1800 mm, height 1462 mm, wheelbase 2731 mm, and a fuel tank capacity of 50 liters. The Sagitar is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85 kW at 5000 rpm and a maximum torque of 175 Nm between 1400 and 4500 rpm.
9
0
Share

Is the 2020 Highlander Hybrid Eligible for Green License Plates?

2020 Highlander Hybrid is eligible for green license plates. Here is the relevant information: Introduction to the Highlander: The Toyota Highlander features a spacious body with innovative and roomy interiors, making it a large SUV in the Toyota lineup. The Highlander comes standard with top-tier safety equipment in its class, offering a quiet ride and exceptional responsiveness, combining versatility with driving comfort. Exterior: The new Highlander has noticeable exterior changes. The front fascia features a smaller hexagonal grille, with a silver chrome trim connecting the emblem above the grille, enhancing the overall harmony and completeness of the front design.
13
1
Share

Why Maintain a Larger Following Distance?

When driving in traffic, maintaining a sufficient safe distance is crucial to ensure adequate space for evasive maneuvers in emergency situations. The advantages of keeping an appropriate safety gap include: 1. Facilitates Evasion: Provides ample space to react to sudden hazards. 2. Enhances Forward Visibility: Closer proximity to the leading vehicle obstructs the view of road conditions ahead. 3. Prevents Brake-Light-Related Collisions: Mitigates risks when the leading vehicle's brake lights malfunction, delaying braking detection. 4. Reduces Rear-End Collisions: Excessive tailgating significantly increases the likelihood of rear-end accidents.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.