Is starting a car after drinking considered drunk driving?

What Should Be Replaced During the First Car Maintenance?

New car first maintenance focuses on replacing engine oil and the oil filter. More details are as follows: 1. Since the period before the first maintenance is the vehicle's break-in period, the gradually breaking-in engine will continuously mix mechanical impurities such as dust, metal wear, and carbon deposits into the engine oil during operation. This is why it's advised not to drive at high speeds during the break-in period, as the oil contains too many impurities, which can lead to abnormal engine wear. Therefore, replacing the engine oil and filter during the first maintenance is crucial. If debris and impurities produced by the engine are not removed in time, they may cause abnormal damage to the internal parts of the cylinders. 2. The first car maintenance must be done within 5,000 kilometers or six months of driving, whichever comes first. Generally, the best time for the first maintenance is between 4,000 and 5,000 kilometers, but the car should not be used for more than six months. If the time limit is exceeded, the dealership will not perform the first maintenance. 3. First, bring the maintenance manual and the vehicle's registration certificate. Remember to have the dealership stamp the maintenance record each time, noting the maintenance items and date, which helps the next owner see the vehicle's maintenance history when reselling. Usually, the first maintenance is included with the purchase of the car.

105

Share

How to Connect the Sensors on a Geely Emgrand?

The wiring methods for Geely Emgrand sensors vary and should be installed according to the relevant installation manual. Automotive sensors serve as input devices for the vehicle's computer system, converting various operational conditions such as speed, temperature of different mediums, and engine operation status into electrical signals transmitted to the computer, ensuring the engine operates under optimal conditions. The detection methods for automotive sensors are as follows: 1. Unplug the connector, turn the key to the second position, and use a voltmeter to measure and confirm that the power line has voltage output; 2. Use a multimeter to identify the ground wire. Connect one probe of the multimeter in voltage mode to the confirmed power line, and the other probe to the remaining two wires. The wire that shows voltage is the ground wire, and the remaining one is the signal wire; 3. Then, turn off the key, pull out the signal wire, reconnect the connector, start the engine, and measure the voltage between the signal wire and the ground wire to check for signal voltage output (the output voltage should be less than the supply voltage). If there is no voltage, the sensor is likely faulty; 4. During the above steps, also check the condition of the signal teeth on the camshaft, ensure there are no obstructions between the camshaft sensor and the signal teeth, and verify that the gap is normal.

106

Share

What is the displacement of the Chang'an Benben?

The displacement of the Chang'an Benben is 1.4L. Below is the relevant information about the Chang'an Benben: 1. The Chang'an Benben is equipped with a 1.4L naturally aspirated engine, with a maximum power output of 74 kW and a maximum torque of 135 Nm. 2. The engine of the Chang'an Benben features VVT technology and multi-point fuel injection technology, using an aluminum alloy cylinder head and block. It is paired with either a 5-speed manual transmission or a 5-speed AMT transmission. 3. The Chang'an Benben is the first independently developed sedan under the Chang'an brand, with both the engine and exterior design being entirely self-developed. 4. In terms of body dimensions, the Chang'an Benben measures 3525mm in length, 1650mm in width, and 1550mm in height, with a wheelbase of 2365mm.

108

Share

What Are the Hazards of Automobiles?

The hazards of automobiles are as follows: High consumption of natural resources: Manufacturing automobiles requires the consumption of vast amounts of natural resources. In addition to steel, modern cars also utilize energy-intensive aluminum and hard-to-recycle plastics. Destruction of traditional culture: Highways built to facilitate rapid automobile travel often bisect entire cultural regions (e.g., towns, villages), causing significant damage to local traditional cultures. Harm to wildlife: The construction of new highways frequently destroys wildlife habitats, and animals are also prone to fatal accidents when crossing roads. Reduction in human life safety: Traffic accidents caused by automobiles are one of the leading causes of human fatalities and injuries worldwide, with millions of people suffering from car accidents each year.

112

Share

How to adjust the rearview mirror of the Trumpchi GS4?

All models of the Trumpchi GS4 come standard with electrically adjustable rearview mirrors. The adjustment lever is located in front of the window switch on the driver's side door, marked with L and R. Rotating the lever to L adjusts the left exterior mirror up, down, left, and right, and vice versa for the right side. Below are the methods for adjusting the rearview mirrors: 1. Adjusting the center rearview mirror: Adjust the left and right positions so that the left edge of the mirror just cuts off your right ear in the reflection. For the up and down positions, place the distant horizon in the center of the mirror. 2. Adjusting the left rearview mirror: For the up and down positions, place the distant horizon in the center. For the left and right positions, adjust so that the car body occupies 1/4 of the mirror's area. 3. Adjusting the right rearview mirror: When adjusting the up and down positions, leave a larger ground area, about 2/3 of the mirror's surface. As for the left and right positions, adjust so that the car body occupies 1/4 of the mirror's area.

103

Share

What Causes Engine Vibration When the AC is On in a Honda CR-V?

There are two main reasons why the Honda CR-V experiences idle vibration when the AC is turned on: one is a load sensor issue, and the other is engine mount damage. It is recommended that the owner promptly seek repairs to avoid affecting vehicle usage. More details are as follows: 1. During normal engine operation, vibrations occur, including after starting the compressor, but they are partially filtered out by the engine mounts, making them less noticeable. Engine mounts are located between the body and the engine and are part of the vehicle's engine vibration isolation system. 2. If the engine mounts collapse or become damaged, the engine's balance is disrupted, and turning on the compressor may reach a resonance frequency, intensifying the vibrations. 3. Idle refers to the state where the engine operates at its lowest speed without additional loads. Turning on the AC increases the load, and the engine load sensor detects this increase, transmitting the signal to the engine control unit (ECU), which then commands an increase in engine speed to accommodate the additional load. The engine automatically increases the throttle opening to allow more air intake, thereby boosting power output. 4. If the throttle valve is not maintained for a long time, carbon deposits can easily accumulate, obstructing engine air intake. This can result in the engine struggling or barely managing to drive the compressor, leading to idle vibration.

111

Share